JLTV TEST A (2025) UPDATED ACTUAL EXAM
QUESTIONS AND CORRECT ANSWERS NEWEST
ACTUAL EXAM || MOST RECENT EXAM 2026 ACTUAL
COMPLETE REAL EXAM //WITH COMPLETE QUESTIONS
AND CORRECT ANSWERS (ALREADY GRADED A+) |
GUARANTEED SUCCESS!!
Fill in the blanks in the vehicle hierarchy below:
UTL
GENERAL PURPOSE
HEAVY
CLOSE COMBAT
TRAILER
2. Why do the High Pressure Gas (HPG) pumps automatically stop running
after running continuously for 10 minutes?
A. To prevent overcharging of the suspension components and HPG Spring
components
B. To prevent the SPNSN ERROR light from illuminating
C. To prevent the hydraulic pumps that power the springs' pumps from
overheating
D. To prevent system leakage
C. To prevent the hydraulic pumps that power the springs' pumps from
overheating
3. The transaxle receives power from the
A. Engine
B. Transmission
, C. CTIS
D. Suspension system
Transmission
Height for mudding stuff
30in, 60in
5. Air over hydraulic brakes function by:
A. The engine-driven belt provides power to the hydraulic pumps for the
brakes.
B. The air pressure for service brakes is monitored by the CTIS, CTIS sends
the signal to the hydraulic components of when to apply or not apply.
C. The CAC controls the air circulation directly to the service brake, when
the service brake is engaged it pushes hydraulic fluid through the lines to
activate the brakes.
When the air system is charged, the air pressure holds the hydraulic
braking components open so they cannot apply; when service brake
applied, it drops psi allowing hydraulic components to apply/engage.
When the air system is charged, the air pressure holds the hydraulic
braking components open so they cannot apply; when service brake
applied, it drops psi allowing hydraulic components to apply/engage.
Locate the buttons on the MUX panel
Blackout Switch
Head Lights and Clearence Lights
Internal Dome Light Selector
Dome Light Dimmer
Dash Light Dimmer
7. List the five Suspension Settings the DRIVER uses.
Answer: Operational, Loading, Tie Down, Fording, and SAES
8. Combat Override is only to be used in emergency situations, which of
the factors below are true for how Combat Override affects the JLTV?
A. Provides for an emergency bypass in the event of DSDU failure.
QUESTIONS AND CORRECT ANSWERS NEWEST
ACTUAL EXAM || MOST RECENT EXAM 2026 ACTUAL
COMPLETE REAL EXAM //WITH COMPLETE QUESTIONS
AND CORRECT ANSWERS (ALREADY GRADED A+) |
GUARANTEED SUCCESS!!
Fill in the blanks in the vehicle hierarchy below:
UTL
GENERAL PURPOSE
HEAVY
CLOSE COMBAT
TRAILER
2. Why do the High Pressure Gas (HPG) pumps automatically stop running
after running continuously for 10 minutes?
A. To prevent overcharging of the suspension components and HPG Spring
components
B. To prevent the SPNSN ERROR light from illuminating
C. To prevent the hydraulic pumps that power the springs' pumps from
overheating
D. To prevent system leakage
C. To prevent the hydraulic pumps that power the springs' pumps from
overheating
3. The transaxle receives power from the
A. Engine
B. Transmission
, C. CTIS
D. Suspension system
Transmission
Height for mudding stuff
30in, 60in
5. Air over hydraulic brakes function by:
A. The engine-driven belt provides power to the hydraulic pumps for the
brakes.
B. The air pressure for service brakes is monitored by the CTIS, CTIS sends
the signal to the hydraulic components of when to apply or not apply.
C. The CAC controls the air circulation directly to the service brake, when
the service brake is engaged it pushes hydraulic fluid through the lines to
activate the brakes.
When the air system is charged, the air pressure holds the hydraulic
braking components open so they cannot apply; when service brake
applied, it drops psi allowing hydraulic components to apply/engage.
When the air system is charged, the air pressure holds the hydraulic
braking components open so they cannot apply; when service brake
applied, it drops psi allowing hydraulic components to apply/engage.
Locate the buttons on the MUX panel
Blackout Switch
Head Lights and Clearence Lights
Internal Dome Light Selector
Dome Light Dimmer
Dash Light Dimmer
7. List the five Suspension Settings the DRIVER uses.
Answer: Operational, Loading, Tie Down, Fording, and SAES
8. Combat Override is only to be used in emergency situations, which of
the factors below are true for how Combat Override affects the JLTV?
A. Provides for an emergency bypass in the event of DSDU failure.
