Fortinet NSE7_FSN_AR-7.6 Exam
Fortinet NSE 7 - Secure Networking 7.6
Architect
https://www.passquestion.com/nse7_fsn_ar-7-6.html
35% OFF on All, Including NSE7_FSN_AR-7.6 Questions and Answers
Pass NSE7_FSN_AR-7.6 Exam with PassQuestion
NSE7_FSN_AR-7.6 questions and answers in the first attempt.
https://www.passquestion.com/
1/7
, 1.An architect is deploying a high-traffic volume data center and opts to use the FortiGate Session Life
Support Protocol (FGSP) to synchronize sessions between two standalone FortiGate devices. Due to
asymmetric routing, traffic enters the network through one device and exits through the other.
Which statement accurately describes a critical requirement or limitation of FGSP in this specific
environment?
A. IPsec VPN tunnels are automatically fully synchronized by default, ensuring seamless failover without
requiring any re-negotiation.
B. FGSP includes built-in configuration synchronization, meaning administrators only need to manage
policies on the primary node.
C. Both FortiGate devices must be configured with identical routing tables and security policies to process
the asymmetric traffic correctly.
D. A dedicated hardware heartbeat interface is mandatory to elect the primary and secondary roles before
synchronization can begin.
Answer: C
Explanation:
✑ Core Concept: FGSP standalone synchronization and asymmetric traffic handling.
✑ Analysis: Unlike FGCP (which operates as a strict cluster with a master/slave dynamic and automatic
configuration sync), FGSP synchronizes sessions between standalone devices. Because the devices are
standalone, configuration is not automatically synced. For symmetric or asymmetric traffic to be allowed
and processed correctly across both peers, the underlying routing tables, firewall policies, and inspection
profiles must perfectly match on both units.
Option A is incorrect because IPsec synchronization has specific requirements and limitations in FGSP.
Option B is incorrect as configuration sync must be handled via FortiManager or manual replication.
Option D describes FGCP, not FGSP.
✑ CLI /Reference: config system standalone-cluster and config system session-sync.
2.An enterprise is implementing the Fortinet Security Fabric to enhance its incident response capabilities.
The architect wants to configure an Automation Stitch that automatically quarantines an endpoint at the
switch port level when a high-severity Indicator of Compromise (IoC) is detected.
Which of the following is a mandatory prerequisite for this specific IoC trigger to function?
A. FortiAnalyzer must be actively integrated into the Security Fabric to provide the threat database and
trigger the IoC event.
B. The upstream core router must support dynamic BGP routing in order to actively isolate the infected
subnet via route maps.
C. A third-party webhook API must be deployed locally to interpret the telemetry data before passing it to
the FortiSwitch.
D. A FortiGate active-active (FGCP) cluster is required at the edge to ensure the Automation Stitch avoids
false positive detections.
Answer: A
Explanation:
✑ Core Concept: Automation Stitches and Security Fabric IoC detection.
✑ Analysis: In the Fortinet Security Fabric, FortiGate heavily relies on FortiAnalyzer to collect, analyze,
and detect Indicators of Compromise (IoCs) based on threat intelligence. The Automation Stitch trigger
for an IoC event specifically requires FortiAnalyzer to be part of the Fabric to identify the compromised
2/7
Fortinet NSE 7 - Secure Networking 7.6
Architect
https://www.passquestion.com/nse7_fsn_ar-7-6.html
35% OFF on All, Including NSE7_FSN_AR-7.6 Questions and Answers
Pass NSE7_FSN_AR-7.6 Exam with PassQuestion
NSE7_FSN_AR-7.6 questions and answers in the first attempt.
https://www.passquestion.com/
1/7
, 1.An architect is deploying a high-traffic volume data center and opts to use the FortiGate Session Life
Support Protocol (FGSP) to synchronize sessions between two standalone FortiGate devices. Due to
asymmetric routing, traffic enters the network through one device and exits through the other.
Which statement accurately describes a critical requirement or limitation of FGSP in this specific
environment?
A. IPsec VPN tunnels are automatically fully synchronized by default, ensuring seamless failover without
requiring any re-negotiation.
B. FGSP includes built-in configuration synchronization, meaning administrators only need to manage
policies on the primary node.
C. Both FortiGate devices must be configured with identical routing tables and security policies to process
the asymmetric traffic correctly.
D. A dedicated hardware heartbeat interface is mandatory to elect the primary and secondary roles before
synchronization can begin.
Answer: C
Explanation:
✑ Core Concept: FGSP standalone synchronization and asymmetric traffic handling.
✑ Analysis: Unlike FGCP (which operates as a strict cluster with a master/slave dynamic and automatic
configuration sync), FGSP synchronizes sessions between standalone devices. Because the devices are
standalone, configuration is not automatically synced. For symmetric or asymmetric traffic to be allowed
and processed correctly across both peers, the underlying routing tables, firewall policies, and inspection
profiles must perfectly match on both units.
Option A is incorrect because IPsec synchronization has specific requirements and limitations in FGSP.
Option B is incorrect as configuration sync must be handled via FortiManager or manual replication.
Option D describes FGCP, not FGSP.
✑ CLI /Reference: config system standalone-cluster and config system session-sync.
2.An enterprise is implementing the Fortinet Security Fabric to enhance its incident response capabilities.
The architect wants to configure an Automation Stitch that automatically quarantines an endpoint at the
switch port level when a high-severity Indicator of Compromise (IoC) is detected.
Which of the following is a mandatory prerequisite for this specific IoC trigger to function?
A. FortiAnalyzer must be actively integrated into the Security Fabric to provide the threat database and
trigger the IoC event.
B. The upstream core router must support dynamic BGP routing in order to actively isolate the infected
subnet via route maps.
C. A third-party webhook API must be deployed locally to interpret the telemetry data before passing it to
the FortiSwitch.
D. A FortiGate active-active (FGCP) cluster is required at the edge to ensure the Automation Stitch avoids
false positive detections.
Answer: A
Explanation:
✑ Core Concept: Automation Stitches and Security Fabric IoC detection.
✑ Analysis: In the Fortinet Security Fabric, FortiGate heavily relies on FortiAnalyzer to collect, analyze,
and detect Indicators of Compromise (IoCs) based on threat intelligence. The Automation Stitch trigger
for an IoC event specifically requires FortiAnalyzer to be part of the Fabric to identify the compromised
2/7
