Page |1
Health Care, Lvl II - 24 NFPA 99 and 2026 Lesson 1: Facility Electrical Equipment
Maintenance with Complete Solutions UPDATED!!!!
? may be defined as the periodic inspection, repair, and
cleaning of connections, contacts, dirt and grime build up, and
evidence of overheating and corrosion. - ANSWER B.
Maintenance
? should be consulted for abnormal hot spots, or any area
showing overheating. - ANSWER A. Infrared thermographic
scans
A ? is an individual that demonstrates skills and knowledge
related to the construction and operation of electrical
equipment and can perform work on or near energized
equipment and has received safety training to identify and
avoid all hazards involved in the work process. - ANSWER D.
qualified person
According to CMS requirements, "maintenance shall be
performed in accordance with ? ." - ANSWER A. equipment
manufacturer's recommendation
, Page |2
Alternative Equipment Maintenance Programs ? . - ANSWER D.
all of the above
Before starting live work, the technician in charge shall review ?
. - ANSWER D. both a. and c.
CMS allows health care facilities to develop Alternative
Equipment Maintenance Programs that may increase or
decrease ? depending on the requirements of the electrical
system taken as a whole. - ANSWER A. the intervals between
manufacturer's recommended maintenance periods
During maintenance on an essential electrical system, which
task is not required by NFPA 110? - ANSWER C. Maintenance
must be scheduled with CMS.
In the event the health care facility uses stored energy to
provide for an element of an essential electrical system, ?
provides guidance on the maintenance and operational testing
of these systems. - ANSWER D. NFPA 111
Health Care, Lvl II - 24 NFPA 99 and 2026 Lesson 1: Facility Electrical Equipment
Maintenance with Complete Solutions UPDATED!!!!
? may be defined as the periodic inspection, repair, and
cleaning of connections, contacts, dirt and grime build up, and
evidence of overheating and corrosion. - ANSWER B.
Maintenance
? should be consulted for abnormal hot spots, or any area
showing overheating. - ANSWER A. Infrared thermographic
scans
A ? is an individual that demonstrates skills and knowledge
related to the construction and operation of electrical
equipment and can perform work on or near energized
equipment and has received safety training to identify and
avoid all hazards involved in the work process. - ANSWER D.
qualified person
According to CMS requirements, "maintenance shall be
performed in accordance with ? ." - ANSWER A. equipment
manufacturer's recommendation
, Page |2
Alternative Equipment Maintenance Programs ? . - ANSWER D.
all of the above
Before starting live work, the technician in charge shall review ?
. - ANSWER D. both a. and c.
CMS allows health care facilities to develop Alternative
Equipment Maintenance Programs that may increase or
decrease ? depending on the requirements of the electrical
system taken as a whole. - ANSWER A. the intervals between
manufacturer's recommended maintenance periods
During maintenance on an essential electrical system, which
task is not required by NFPA 110? - ANSWER C. Maintenance
must be scheduled with CMS.
In the event the health care facility uses stored energy to
provide for an element of an essential electrical system, ?
provides guidance on the maintenance and operational testing
of these systems. - ANSWER D. NFPA 111
