RTX 407 FINAL EXAM COMPREHENSIVE STUDY
GUIDE 2026
◉ wavelength.
Answer:the distance between waves
◉ amplitude.
Answer:the height of a wave
◉ frequency.
Answer:how many waves pass in one second (related to speed)
◉ high energy waves.
Answer:high frequency, very short and compact wavelengths
-e.g. violet
◉ low energy waves.
Answer:low frequency, long wavelengths
-e.g. red
◉ visible spectrum.
,Answer:the portion of the electromagnetic spectrum from red
(lowest energy) to violet (highest energy)
◉ transmitted light.
Answer:light that is able to pass through a solution
◉ absorbed light.
Answer:light that enters but does not leave a solution
◉ inverse (fill in the blank).
Answer:light Transmittance (T) and absorbance have a
_____________________ relationship
-the more light that is absorbed, the less light there is left over to
transmit
◉ beer's law.
Answer:A=abc
-A= absorbance (calculated, no units)
-a= molar absorptivity: constant for a compound (L/mol*cm)
-b= light path through the solution: constant because same cuvette is
used (cm)
-c= concentration of substance: value that is responsible for changes
in absorbance because its the only non-constant (mol/L)
,◉ directly (fill in the blank).
Answer:absorbance and concentration have a _______________
proportional relationship
-the higher the absorbance in a sample, the higher the concentration
of absorbing substance was
◉ spectrophotometer.
Answer:-light source
-entrance slit: ensures no excess light is able to enter
-monochromator: isolates the particular wavelengths you want to
measure
-exit slit
-sample contained (cuvette): determines the constant b (path of
light through solution) in beers law
-photodetector: converts light energy photons into electrical energy
-readout device: generates a voltage signal that measures how much
light was detected
◉ glass filter (monochromator).
Answer:colored glass that absorbs and transmits particular
wavelengths of light
-broad bandpass (50 nm)
, -cheap
◉ interference filter (monochromator).
Answer:a set of mirrored surfaces that bounce light back and forth
to produce constructive interference to produce desired bandpass
-5-10 nm bandpass (pretty narrow)
◉ glass prism (monochromator).
Answer:a curved spectrum is produced and can be rotated to allow
desired wavelength through the entrance slit
◉ diffraction grating (monochromator).
Answer:parallel grooves that produce a linear straight spectrum
through bending of light
-best monochromator
-bandpass can be < 1 nm (VERY specific)
◉ calibrator (standard).
Answer:a solution that is used in laboratory instrument to establish
a relationship between the instrument's signal readout and the
concentration of an analyte
-has a single known value (known concentration of analyte) to see if
the instrument is measuring properly
GUIDE 2026
◉ wavelength.
Answer:the distance between waves
◉ amplitude.
Answer:the height of a wave
◉ frequency.
Answer:how many waves pass in one second (related to speed)
◉ high energy waves.
Answer:high frequency, very short and compact wavelengths
-e.g. violet
◉ low energy waves.
Answer:low frequency, long wavelengths
-e.g. red
◉ visible spectrum.
,Answer:the portion of the electromagnetic spectrum from red
(lowest energy) to violet (highest energy)
◉ transmitted light.
Answer:light that is able to pass through a solution
◉ absorbed light.
Answer:light that enters but does not leave a solution
◉ inverse (fill in the blank).
Answer:light Transmittance (T) and absorbance have a
_____________________ relationship
-the more light that is absorbed, the less light there is left over to
transmit
◉ beer's law.
Answer:A=abc
-A= absorbance (calculated, no units)
-a= molar absorptivity: constant for a compound (L/mol*cm)
-b= light path through the solution: constant because same cuvette is
used (cm)
-c= concentration of substance: value that is responsible for changes
in absorbance because its the only non-constant (mol/L)
,◉ directly (fill in the blank).
Answer:absorbance and concentration have a _______________
proportional relationship
-the higher the absorbance in a sample, the higher the concentration
of absorbing substance was
◉ spectrophotometer.
Answer:-light source
-entrance slit: ensures no excess light is able to enter
-monochromator: isolates the particular wavelengths you want to
measure
-exit slit
-sample contained (cuvette): determines the constant b (path of
light through solution) in beers law
-photodetector: converts light energy photons into electrical energy
-readout device: generates a voltage signal that measures how much
light was detected
◉ glass filter (monochromator).
Answer:colored glass that absorbs and transmits particular
wavelengths of light
-broad bandpass (50 nm)
, -cheap
◉ interference filter (monochromator).
Answer:a set of mirrored surfaces that bounce light back and forth
to produce constructive interference to produce desired bandpass
-5-10 nm bandpass (pretty narrow)
◉ glass prism (monochromator).
Answer:a curved spectrum is produced and can be rotated to allow
desired wavelength through the entrance slit
◉ diffraction grating (monochromator).
Answer:parallel grooves that produce a linear straight spectrum
through bending of light
-best monochromator
-bandpass can be < 1 nm (VERY specific)
◉ calibrator (standard).
Answer:a solution that is used in laboratory instrument to establish
a relationship between the instrument's signal readout and the
concentration of an analyte
-has a single known value (known concentration of analyte) to see if
the instrument is measuring properly