CSPT Exam 2.6 (Action Levels and Parameters for
Assessing Environmental Monitoring Results) Exam with
All Correct & 100% Verified Answers |Already Graded A+
environmental monitoring ✔Correct Answer-crucial for maintaining the sterility and safety of
compounded preparations, particularly in sterile compounding and hazardous drug areas.
Monitoring results are compared against established action levels to determine whether
environmental conditions are acceptable or if corrective actions are required.
These action levels are based on industry standards, such as those outlined in USP <797> for
sterile compounding and USP <800> for handling hazardous drugs, and they help assess
whether the facility is meeting required cleanliness and safety parameters.
What is the purpose of surface sampling in critical compounding areas? ✔Correct Answer-
Surface sampling is used to detect microbial contamination on surfaces in critical compounding
areas, such as countertops, equipment, and floors.
What is the action level for microbial contamination in ISO Class 5 compounding areas?
✔Correct Answer-No growth of microorganisms is allowed. If any growth is detected, corrective
actions are required.
What is the maximum allowable CFUs per 100 square inches in ISO Class 5 compounding areas?
✔Correct Answer-No more than 1 CFU (colony-forming unit) per 100 square inches of critical
surfaces.
What is the maximum allowable CFUs per 100 square inches in ISO Class 7 buffer rooms?
✔Correct Answer-Maximum of 3 CFUs per 100 square inches of surface area.
What is the maximum allowable CFUs per 100 square inches in ISO Class 8 anterooms?
✔Correct Answer-Maximum of 5 CFUs per 100 square inches of surface area.
What corrective actions should be taken if surface sampling results exceed action levels?
✔Correct Answer-The areas should be cleaned and disinfected thoroughly, and retraining of
personnel on proper cleaning procedures may be necessary.
What should be done after corrective actions are taken following surface sampling? ✔Correct
Answer-Re-sampling should be conducted to verify the effectiveness of corrective actions.
What is the purpose of viable air sampling? ✔Correct Answer-To assess the microbial
contamination levels in the air and verify the effectiveness of air filtration and airflow systems.
Assessing Environmental Monitoring Results) Exam with
All Correct & 100% Verified Answers |Already Graded A+
environmental monitoring ✔Correct Answer-crucial for maintaining the sterility and safety of
compounded preparations, particularly in sterile compounding and hazardous drug areas.
Monitoring results are compared against established action levels to determine whether
environmental conditions are acceptable or if corrective actions are required.
These action levels are based on industry standards, such as those outlined in USP <797> for
sterile compounding and USP <800> for handling hazardous drugs, and they help assess
whether the facility is meeting required cleanliness and safety parameters.
What is the purpose of surface sampling in critical compounding areas? ✔Correct Answer-
Surface sampling is used to detect microbial contamination on surfaces in critical compounding
areas, such as countertops, equipment, and floors.
What is the action level for microbial contamination in ISO Class 5 compounding areas?
✔Correct Answer-No growth of microorganisms is allowed. If any growth is detected, corrective
actions are required.
What is the maximum allowable CFUs per 100 square inches in ISO Class 5 compounding areas?
✔Correct Answer-No more than 1 CFU (colony-forming unit) per 100 square inches of critical
surfaces.
What is the maximum allowable CFUs per 100 square inches in ISO Class 7 buffer rooms?
✔Correct Answer-Maximum of 3 CFUs per 100 square inches of surface area.
What is the maximum allowable CFUs per 100 square inches in ISO Class 8 anterooms?
✔Correct Answer-Maximum of 5 CFUs per 100 square inches of surface area.
What corrective actions should be taken if surface sampling results exceed action levels?
✔Correct Answer-The areas should be cleaned and disinfected thoroughly, and retraining of
personnel on proper cleaning procedures may be necessary.
What should be done after corrective actions are taken following surface sampling? ✔Correct
Answer-Re-sampling should be conducted to verify the effectiveness of corrective actions.
What is the purpose of viable air sampling? ✔Correct Answer-To assess the microbial
contamination levels in the air and verify the effectiveness of air filtration and airflow systems.
