Feed water pumps take water from the:
a. hotwell
b. open feedwater heater
c. flash tank
d. boiler
Give this one a try later!
b. open feedwater heater
Lubricating oil pumps are typically:
a. a waste of money
b. rotary
c. centrifugal
d. dynamic displacement
Give this one a try later!
, b. rotary
The biggest fuel safety factor is it's:
a. fire point
b. flash point
c. pour point
d. service factor
Give this one a try later!
b. flash point
Air compressors require:
a. high viscosity oil
b. low sulfur oil
c. low temperature oil
d. detergent free oil
Give this one a try later!
d. detergent free oil
When inspecting a boiler, main steam valves are:
a. open
b. closed
c. depends on the boiler
d. closed, locked, and tagged
Give this one a try later!
, d. closed, locked, and tagged
Which chemical is used to bind to solids to form non-adhering sludge?
a. phosphates
b. phosphinates
c. organic boiler treatment
d. any of these chemicals
Give this one a try later!
d. any of these chemicals
10 psig is equal to:
a. -4.7 psia
b. 14.7 psia
c. 24.7 psia
d. 29.4 psia
Give this one a try later!
c. 24.7 psia
To keep oil liquified we run this line with our fuel line:
a. supply line
b. tracer line
c. propane line
d. diesel line
Give this one a try later!
, b. tracer line
Natural draft can be increased by:
a. increasing the diameter of the chimney
b. increasing the height of the chimney
c. decreasing the diameter of the chimney
d. decreasing the height of the chimney
Give this one a try later!
b. increasing the height of the chimney
Carbon monoxide, carbon dioxide, and oxygen measured with a(n)?
a. orsat analyzer
b. TSS transducer
c. rankin monitor
d. rheostat
Give this one a try later!
a. orsat analyzer
Before firing a boiler, it must FIRST:
a. ignite pilot
b. prove the pilot
c. prepurge
d. prove the main flame
Give this one a try later!
a. hotwell
b. open feedwater heater
c. flash tank
d. boiler
Give this one a try later!
b. open feedwater heater
Lubricating oil pumps are typically:
a. a waste of money
b. rotary
c. centrifugal
d. dynamic displacement
Give this one a try later!
, b. rotary
The biggest fuel safety factor is it's:
a. fire point
b. flash point
c. pour point
d. service factor
Give this one a try later!
b. flash point
Air compressors require:
a. high viscosity oil
b. low sulfur oil
c. low temperature oil
d. detergent free oil
Give this one a try later!
d. detergent free oil
When inspecting a boiler, main steam valves are:
a. open
b. closed
c. depends on the boiler
d. closed, locked, and tagged
Give this one a try later!
, d. closed, locked, and tagged
Which chemical is used to bind to solids to form non-adhering sludge?
a. phosphates
b. phosphinates
c. organic boiler treatment
d. any of these chemicals
Give this one a try later!
d. any of these chemicals
10 psig is equal to:
a. -4.7 psia
b. 14.7 psia
c. 24.7 psia
d. 29.4 psia
Give this one a try later!
c. 24.7 psia
To keep oil liquified we run this line with our fuel line:
a. supply line
b. tracer line
c. propane line
d. diesel line
Give this one a try later!
, b. tracer line
Natural draft can be increased by:
a. increasing the diameter of the chimney
b. increasing the height of the chimney
c. decreasing the diameter of the chimney
d. decreasing the height of the chimney
Give this one a try later!
b. increasing the height of the chimney
Carbon monoxide, carbon dioxide, and oxygen measured with a(n)?
a. orsat analyzer
b. TSS transducer
c. rankin monitor
d. rheostat
Give this one a try later!
a. orsat analyzer
Before firing a boiler, it must FIRST:
a. ignite pilot
b. prove the pilot
c. prepurge
d. prove the main flame
Give this one a try later!
