IDFX - Questions and Answers
2026 Expert Verifed Ace the
Test
Which information would not be found in an elevation drawing?
-The manner in which an assembly of several parts is organized and
connected
-Wall-mounted equipment
-The configuration and finish of wall surfaces
-Reference to other sections or details - ANSWER ✔✔The manner in
which an assembly of several parts is organized and connected. Would
be found in a detail drawing
Recessed fluorescent light symbol - ANSWER ✔✔
,pocket door - ANSWER ✔✔
bifold door - ANSWER ✔✔
sliding door - ANSWER ✔✔
french door - ANSWER ✔✔
Which symbol represents a quadruplex outlet? - ANSWER ✔✔c
A schedule for construction drawings would be used to indicate all of the
following except?
-window treatment hardware
-ceiling finishes
-types of doors
-wall finishes - ANSWER ✔✔window treatment hardware
Common schedules for interior design construction drawings include
room finish, door, kitchen equipment, millwork and hardware. Window
treatment hardware is NOT part of construction, while millwork hardware
is.
Which plan prepared by the interior designer would show the location of
power/data/switching? - ANSWER ✔✔power/communications plan
,In creating drawings for paneling that will be suspended from a wall with
cleats, the most important piece of information is the - ANSWER
✔✔dimension between the panel top and ceiling
On what drawing in a construction drawing set would you MOST likely
find the dimension noting the height of a handrail for a stair? -
ANSWER ✔✔Elevation drawing of the stair
Sections of the handrail itself, nosing, etc. are too detailed to show an
overall dimension such as handrail height, and typically contain more
specific information as to how those elements are to be constructed, and
not the overall mounting height of such elements.
Which of the details below would you expect to see on a shop drawing
for a custom cabinet designed with flush overlay construction? -
ANSWER ✔✔
Which method of veneer cut results in the straightest grain possible from
most species of trees? - ANSWER ✔✔quarter slicing
Quarter slicing creates the most straight grained pattern because the
cutting knife strikes the growth rings at a 90 degree angle.
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, half-round slicing - ANSWER ✔✔
flat slicing - ANSWER ✔✔
rotary slicing - ANSWER ✔✔
What would be the best way to ensure that the finish on new millwork
matches the finish on existing millwork on a remodeling project? -
ANSWER ✔✔Indicate on the drawings and in the specifications that
the new work should match the existing work.
it puts the entire burden of matching the existing finish on the contractor
and painting subcontractor.
The typical size of an office's projects, the filing system used by the
office, the capabilities of the reproduction and plotting equipment, and
client requirements all determine: - ANSWER ✔✔size of the drawing
sheet used for an interior design project
Typically, an office will use one or two standard sized for all projects it
does. Sheet size is most typically determined by the size needed to draw
a floor plan on one sheet without dividing the plan into sections.
2026 Expert Verifed Ace the
Test
Which information would not be found in an elevation drawing?
-The manner in which an assembly of several parts is organized and
connected
-Wall-mounted equipment
-The configuration and finish of wall surfaces
-Reference to other sections or details - ANSWER ✔✔The manner in
which an assembly of several parts is organized and connected. Would
be found in a detail drawing
Recessed fluorescent light symbol - ANSWER ✔✔
,pocket door - ANSWER ✔✔
bifold door - ANSWER ✔✔
sliding door - ANSWER ✔✔
french door - ANSWER ✔✔
Which symbol represents a quadruplex outlet? - ANSWER ✔✔c
A schedule for construction drawings would be used to indicate all of the
following except?
-window treatment hardware
-ceiling finishes
-types of doors
-wall finishes - ANSWER ✔✔window treatment hardware
Common schedules for interior design construction drawings include
room finish, door, kitchen equipment, millwork and hardware. Window
treatment hardware is NOT part of construction, while millwork hardware
is.
Which plan prepared by the interior designer would show the location of
power/data/switching? - ANSWER ✔✔power/communications plan
,In creating drawings for paneling that will be suspended from a wall with
cleats, the most important piece of information is the - ANSWER
✔✔dimension between the panel top and ceiling
On what drawing in a construction drawing set would you MOST likely
find the dimension noting the height of a handrail for a stair? -
ANSWER ✔✔Elevation drawing of the stair
Sections of the handrail itself, nosing, etc. are too detailed to show an
overall dimension such as handrail height, and typically contain more
specific information as to how those elements are to be constructed, and
not the overall mounting height of such elements.
Which of the details below would you expect to see on a shop drawing
for a custom cabinet designed with flush overlay construction? -
ANSWER ✔✔
Which method of veneer cut results in the straightest grain possible from
most species of trees? - ANSWER ✔✔quarter slicing
Quarter slicing creates the most straight grained pattern because the
cutting knife strikes the growth rings at a 90 degree angle.
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, half-round slicing - ANSWER ✔✔
flat slicing - ANSWER ✔✔
rotary slicing - ANSWER ✔✔
What would be the best way to ensure that the finish on new millwork
matches the finish on existing millwork on a remodeling project? -
ANSWER ✔✔Indicate on the drawings and in the specifications that
the new work should match the existing work.
it puts the entire burden of matching the existing finish on the contractor
and painting subcontractor.
The typical size of an office's projects, the filing system used by the
office, the capabilities of the reproduction and plotting equipment, and
client requirements all determine: - ANSWER ✔✔size of the drawing
sheet used for an interior design project
Typically, an office will use one or two standard sized for all projects it
does. Sheet size is most typically determined by the size needed to draw
a floor plan on one sheet without dividing the plan into sections.
