360 TRAINING OSHA 30 EVALUATION TEST
QUESTIONS AND ANSWERS SURE A+
✔✔Stairs should be installed between (blank) and (blank) degrees from horizontal. -
✔✔30...50
✔✔When using ladders, you should: - ✔✔Face the ladder when moving up and down
✔✔Ladder rungs should be spaced between (blank) and (blank) inches apart -
✔✔10...14
✔✔Employers must provide a stairway or ladder if the elevation between two surfaces
on a site is (blank) inches or more. - ✔✔19
✔✔What should you consider when choosing a ladder that will be used near electrical
sources? - ✔✔The material of the ladder
✔✔Which of the following ladder materials should be avoided when working near power
lines? - ✔✔Aluminum
✔✔Handrails must be provided to all stairways that have (blank) or more risers, or are
higher than 30 inches - ✔✔Four
✔✔Cast-in-Place Concrete Activity:
When placing concrete in erected shoring, when must the shoring be inspected? -
✔✔before, after, during
✔✔Cast-in-Place Concrete Activity:
True or False: Formwork must be strong enough to support all loads placed on it. -
✔✔true
, ✔✔Cast-in-Place Concrete Activity:
When should shoring or reshoring be removed after pouring concrete? - ✔✔When the
concrete has hardened and can support the load on its own
✔✔What should be done before an employee performs maintenance or repair activities
on equipment used in concrete construction? - ✔✔All potentially hazardous energy
sources should be locked out and tagged
✔✔Which of the following is an accepted method of determining when it is safe to
remove concrete formwork? - ✔✔The concrete's compressive strength has been
properly tested
✔✔shoring for concrete operations should be - ✔✔Vertically aligned,
Braced in perpendicular and diagonal directions,
Designed by a qualified designer,
All of the above
✔✔Who should be present in a building where a jacking operation is taking place? -
✔✔Only employees essential to the jacking operation
✔✔When are employees allowed to ride in a concrete bucket? - ✔✔never
✔✔(blank) must have pipe supports designed for 100% overload (i.e. twice the
maximum rated weight) - ✔✔Concrete pumping systems
✔✔What must employers do before placing construction loads on a concrete structure?
- ✔✔Obtain information from a qualified person to ensure the structure can support the
intended loads.
✔✔A limited access zone for masonry construction should - ✔✔It Be equal to the height
of the wall plus four feet.
Be located on the side of the wall without scaffolding.
Restrict entry to only those employees actively building the wall.
All of the above
✔✔What must be done to shoring equipment before and after concrete placement? -
✔✔It must be inspected for security and damage
✔✔The (blank) is responsible for maintaining an accurate count of authorized entrants
in a permit space. - ✔✔Attendant
QUESTIONS AND ANSWERS SURE A+
✔✔Stairs should be installed between (blank) and (blank) degrees from horizontal. -
✔✔30...50
✔✔When using ladders, you should: - ✔✔Face the ladder when moving up and down
✔✔Ladder rungs should be spaced between (blank) and (blank) inches apart -
✔✔10...14
✔✔Employers must provide a stairway or ladder if the elevation between two surfaces
on a site is (blank) inches or more. - ✔✔19
✔✔What should you consider when choosing a ladder that will be used near electrical
sources? - ✔✔The material of the ladder
✔✔Which of the following ladder materials should be avoided when working near power
lines? - ✔✔Aluminum
✔✔Handrails must be provided to all stairways that have (blank) or more risers, or are
higher than 30 inches - ✔✔Four
✔✔Cast-in-Place Concrete Activity:
When placing concrete in erected shoring, when must the shoring be inspected? -
✔✔before, after, during
✔✔Cast-in-Place Concrete Activity:
True or False: Formwork must be strong enough to support all loads placed on it. -
✔✔true
, ✔✔Cast-in-Place Concrete Activity:
When should shoring or reshoring be removed after pouring concrete? - ✔✔When the
concrete has hardened and can support the load on its own
✔✔What should be done before an employee performs maintenance or repair activities
on equipment used in concrete construction? - ✔✔All potentially hazardous energy
sources should be locked out and tagged
✔✔Which of the following is an accepted method of determining when it is safe to
remove concrete formwork? - ✔✔The concrete's compressive strength has been
properly tested
✔✔shoring for concrete operations should be - ✔✔Vertically aligned,
Braced in perpendicular and diagonal directions,
Designed by a qualified designer,
All of the above
✔✔Who should be present in a building where a jacking operation is taking place? -
✔✔Only employees essential to the jacking operation
✔✔When are employees allowed to ride in a concrete bucket? - ✔✔never
✔✔(blank) must have pipe supports designed for 100% overload (i.e. twice the
maximum rated weight) - ✔✔Concrete pumping systems
✔✔What must employers do before placing construction loads on a concrete structure?
- ✔✔Obtain information from a qualified person to ensure the structure can support the
intended loads.
✔✔A limited access zone for masonry construction should - ✔✔It Be equal to the height
of the wall plus four feet.
Be located on the side of the wall without scaffolding.
Restrict entry to only those employees actively building the wall.
All of the above
✔✔What must be done to shoring equipment before and after concrete placement? -
✔✔It must be inspected for security and damage
✔✔The (blank) is responsible for maintaining an accurate count of authorized entrants
in a permit space. - ✔✔Attendant
