NS.M07.5741 Exam comprehensive
questions fully solved & updated (Latest
Update 2026) UPDATE!!
Abnormal Operating Condition -CORRECTANSWER What does the acronym AOC
stand for?
When a condition is identified that may indicate a malfunction of a component or a
deviation from normal operations, resulting in a condition exceeding design limits or
causing harm/hazards to persons, property, or the environment. -CORRECTANSWER
When do AOCs occur?
- Protect life and property
- Stop work and make the situation safe per company emergency response policies and
procedures
- Notify your supervisor of the AOC if the issue requires immediate resolution -
CORRECTANSWER If the AOC presents an immediate risk to life or property, your job
is to:
- As a best practice, contact the assigner to determine if there are any pending AOCs
submitted for the work order location, that also need to be addressed.
,- If the AOC remediation is a different job type, request the appropriate order for the
additional work.
- Document the remediation taken for AOCs in the comments on the order. -
CORRECTANSWER If the AOC is not causing immediate risk to life or property,
remediate any AOCs that can be addressed while onsite, in accordance with your
training and qualifications. This includes:
Any unplanned and/or uncontrolled escape of gas including :
- Outside leaks above ground as indicated at meter sets, regulator/gate station, house
piping, etc.
- Below ground leaks as indicated at transmission lines, mains, service lines, etc. -
CORRECTANSWER Name a type of abnormal operating condition?
Any fire involving a pipeline facility, as indicated by uncontrolled ignition of gas -
CORRECTANSWER Name a type of abnormal operating condition?
Any explosion involving a pipeline, as indicated by:
- A sudden and violent release of gas and/or
, - A loud sound that accompanies a sudden release of energy, etc. -
CORRECTANSWER Name a type of abnormal operating condition?
Any pressure that exceeds the operating limits of the gas system indicated by:
- A relief valve expelling gas or
- Telemetry pressure readings, etc -CORRECTANSWER Name a type of abnormal
operating condition?
Any pressure that falls below the normal operating requirements of the gas system, as
indicated by:
- A pilot out at a customer appliance, or
- Telemetry reads are significantly lower than normal, etc -CORRECTANSWER Name a
type of abnormal operating condition?
No pressure in a pipeline that was last known to be in service, as indicated by the
following:
- Inadvertent shutdown
questions fully solved & updated (Latest
Update 2026) UPDATE!!
Abnormal Operating Condition -CORRECTANSWER What does the acronym AOC
stand for?
When a condition is identified that may indicate a malfunction of a component or a
deviation from normal operations, resulting in a condition exceeding design limits or
causing harm/hazards to persons, property, or the environment. -CORRECTANSWER
When do AOCs occur?
- Protect life and property
- Stop work and make the situation safe per company emergency response policies and
procedures
- Notify your supervisor of the AOC if the issue requires immediate resolution -
CORRECTANSWER If the AOC presents an immediate risk to life or property, your job
is to:
- As a best practice, contact the assigner to determine if there are any pending AOCs
submitted for the work order location, that also need to be addressed.
,- If the AOC remediation is a different job type, request the appropriate order for the
additional work.
- Document the remediation taken for AOCs in the comments on the order. -
CORRECTANSWER If the AOC is not causing immediate risk to life or property,
remediate any AOCs that can be addressed while onsite, in accordance with your
training and qualifications. This includes:
Any unplanned and/or uncontrolled escape of gas including :
- Outside leaks above ground as indicated at meter sets, regulator/gate station, house
piping, etc.
- Below ground leaks as indicated at transmission lines, mains, service lines, etc. -
CORRECTANSWER Name a type of abnormal operating condition?
Any fire involving a pipeline facility, as indicated by uncontrolled ignition of gas -
CORRECTANSWER Name a type of abnormal operating condition?
Any explosion involving a pipeline, as indicated by:
- A sudden and violent release of gas and/or
, - A loud sound that accompanies a sudden release of energy, etc. -
CORRECTANSWER Name a type of abnormal operating condition?
Any pressure that exceeds the operating limits of the gas system indicated by:
- A relief valve expelling gas or
- Telemetry pressure readings, etc -CORRECTANSWER Name a type of abnormal
operating condition?
Any pressure that falls below the normal operating requirements of the gas system, as
indicated by:
- A pilot out at a customer appliance, or
- Telemetry reads are significantly lower than normal, etc -CORRECTANSWER Name a
type of abnormal operating condition?
No pressure in a pipeline that was last known to be in service, as indicated by the
following:
- Inadvertent shutdown
