SIGNALPERSON QUALIFICATION
CERTIFICATION PRACTICE EXAM
NEWEST (2025 - 2026 UPDATE) FROM
REAL PAST PAPERS QUESTIONS – SET
100 MOST COMMON EXAM
FREQUENTLY TESTED QUESTIONS AND
ANSWERS IN DETAILS 100% VERIFIED
EXAM HIGHLY RECOMMENDABLE FOR
GRADE A+
1. A signalperson’s primary responsibility is to
A. Operate the crane
B. Inspect rigging equipment
C. Direct crane movement safely
D. Maintain the crane engine
Answer: C ✓ (Direct crane movement safely)
A signalperson ensures safe and accurate communication of crane
operations to prevent hazards.
2. Which communication method is preferred when visibility is clear?
A. Radio
B. Hand signals
C. Written notes
D. Verbal shouting
, Answer: B ✓ (Hand signals)
Hand signals are standardized and reliable when the operator has a clear
line of sight.
3. When using radio communication, what must be ensured?
A. Loud background noise
B. Continuous talking
C. Clear and concise instructions
D. Use of slang
Answer: C ✓ (Clear and concise instructions)
Clarity prevents misinterpretation and ensures safe crane operation.
4. The standard stop signal is given by
A. One hand raised
B. Arm extended downward
C. Arm extended with palm down moving back and forth
D. Both arms crossed
Answer: C ✓ (Arm extended with palm down moving back and forth)
This universal signal indicates immediate stop to prevent danger.
5. Who has the authority to give a stop signal?
A. Only the supervisor
B. Only the operator
C. Any worker on site
D. Only the signalperson
Answer: C ✓ (Any worker on site)
Safety rules allow anyone to stop operations if a hazard is observed.
6. Before lifting a load, the signalperson must confirm
A. Load color
B. Load weight and rigging
C. Operator’s experience
D. Weather forecast only
, Answer: B ✓ (Load weight and rigging)
Proper load verification ensures the crane is not overloaded.
7. If signals are unclear, the operator should
A. Continue slowly
B. Stop operations
C. Guess the instruction
D. Ignore the signalperson
Answer: B ✓ (Stop operations)
Unclear communication poses serious safety risks.
8. What is the standard signal for “hoist”?
A. Thumb down
B. Thumb up with closed fist
C. Palm open upward
D. Finger pointing
Answer: B ✓ (Thumb up with closed fist)
This indicates raising the load.
9. What is the signal for “lower”?
A. Thumb up
B. Thumb down with closed fist
C. Palm sideways
D. Both arms up
Answer: B ✓ (Thumb down with closed fist)
This directs lowering the load.
10.A dedicated signalperson is required when
A. Crane is idle
B. Operator cannot see the load path
C. Weather is clear
D. Load is light
Answer: B ✓ (Operator cannot see the load path)
A signalperson ensures safe guidance when visibility is obstructed.
CERTIFICATION PRACTICE EXAM
NEWEST (2025 - 2026 UPDATE) FROM
REAL PAST PAPERS QUESTIONS – SET
100 MOST COMMON EXAM
FREQUENTLY TESTED QUESTIONS AND
ANSWERS IN DETAILS 100% VERIFIED
EXAM HIGHLY RECOMMENDABLE FOR
GRADE A+
1. A signalperson’s primary responsibility is to
A. Operate the crane
B. Inspect rigging equipment
C. Direct crane movement safely
D. Maintain the crane engine
Answer: C ✓ (Direct crane movement safely)
A signalperson ensures safe and accurate communication of crane
operations to prevent hazards.
2. Which communication method is preferred when visibility is clear?
A. Radio
B. Hand signals
C. Written notes
D. Verbal shouting
, Answer: B ✓ (Hand signals)
Hand signals are standardized and reliable when the operator has a clear
line of sight.
3. When using radio communication, what must be ensured?
A. Loud background noise
B. Continuous talking
C. Clear and concise instructions
D. Use of slang
Answer: C ✓ (Clear and concise instructions)
Clarity prevents misinterpretation and ensures safe crane operation.
4. The standard stop signal is given by
A. One hand raised
B. Arm extended downward
C. Arm extended with palm down moving back and forth
D. Both arms crossed
Answer: C ✓ (Arm extended with palm down moving back and forth)
This universal signal indicates immediate stop to prevent danger.
5. Who has the authority to give a stop signal?
A. Only the supervisor
B. Only the operator
C. Any worker on site
D. Only the signalperson
Answer: C ✓ (Any worker on site)
Safety rules allow anyone to stop operations if a hazard is observed.
6. Before lifting a load, the signalperson must confirm
A. Load color
B. Load weight and rigging
C. Operator’s experience
D. Weather forecast only
, Answer: B ✓ (Load weight and rigging)
Proper load verification ensures the crane is not overloaded.
7. If signals are unclear, the operator should
A. Continue slowly
B. Stop operations
C. Guess the instruction
D. Ignore the signalperson
Answer: B ✓ (Stop operations)
Unclear communication poses serious safety risks.
8. What is the standard signal for “hoist”?
A. Thumb down
B. Thumb up with closed fist
C. Palm open upward
D. Finger pointing
Answer: B ✓ (Thumb up with closed fist)
This indicates raising the load.
9. What is the signal for “lower”?
A. Thumb up
B. Thumb down with closed fist
C. Palm sideways
D. Both arms up
Answer: B ✓ (Thumb down with closed fist)
This directs lowering the load.
10.A dedicated signalperson is required when
A. Crane is idle
B. Operator cannot see the load path
C. Weather is clear
D. Load is light
Answer: B ✓ (Operator cannot see the load path)
A signalperson ensures safe guidance when visibility is obstructed.
