AMPP Senior Coating Inspector Exam
Questions and Answers with Verified
Solutions | Latest Updated 2026
Code Requirements for ACI 562
Assessment, Repair, and
Rehabilitation of Existing
Concrete Structures &
Commentary
Certified Coating Applicator CCA
thickness less than 20 mils Low voltage holiday testing
thicknesses greater t han 20 high voltage holiday testing
mils
Standard Practice for ASTM D5162
Discontinuity (Holiday) Testing
of Nonconductive Protective
Coating on Metallic Substrates
Standard Test Methods for ASTM G62
Holiday Detection Particularly
in Pipeline Coatings
Discontinuity (Holiday) Testing NACE SPO188
of New Protective Coatings on
COnductive Substrates
, Standard Specification for Zinc ASTM 123
(Hot-Dip Galvanized) Coatings
on Iron and Steel Products
eg. Teflon-highly corrosion Fluoropolymer Coatings
resistant, non-stick, 2 carbon
bonded with Flourine,
temperature stable
An ingredient that brings two Emulsifier
normally incompatible
materials together and binds
them into a uniform and fairly
stable blend.
The main binder that gives a resin
coating its properties and
allows it to adhere to a
substrate.
binders, pigments, extenders components of a coating
or fillers, solvents, rheology
modifiers, and special
additives
holds components together, binder
provides the generic paint
type, adheres to substrate
provide protection for the Pigment
binder and stability for the
film. Impart color or opacity
(hiding)
Questions and Answers with Verified
Solutions | Latest Updated 2026
Code Requirements for ACI 562
Assessment, Repair, and
Rehabilitation of Existing
Concrete Structures &
Commentary
Certified Coating Applicator CCA
thickness less than 20 mils Low voltage holiday testing
thicknesses greater t han 20 high voltage holiday testing
mils
Standard Practice for ASTM D5162
Discontinuity (Holiday) Testing
of Nonconductive Protective
Coating on Metallic Substrates
Standard Test Methods for ASTM G62
Holiday Detection Particularly
in Pipeline Coatings
Discontinuity (Holiday) Testing NACE SPO188
of New Protective Coatings on
COnductive Substrates
, Standard Specification for Zinc ASTM 123
(Hot-Dip Galvanized) Coatings
on Iron and Steel Products
eg. Teflon-highly corrosion Fluoropolymer Coatings
resistant, non-stick, 2 carbon
bonded with Flourine,
temperature stable
An ingredient that brings two Emulsifier
normally incompatible
materials together and binds
them into a uniform and fairly
stable blend.
The main binder that gives a resin
coating its properties and
allows it to adhere to a
substrate.
binders, pigments, extenders components of a coating
or fillers, solvents, rheology
modifiers, and special
additives
holds components together, binder
provides the generic paint
type, adheres to substrate
provide protection for the Pigment
binder and stability for the
film. Impart color or opacity
(hiding)
