• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 4 fuera de 91 páginas
Examen

Sterile Processing Board Ultimate Exam

Document preview thumbnail
Vista previa 4 fuera de 91 páginas

The Sterile Processing Board Ultimate Exam is a comprehensive preparation resource designed for individuals seeking certification and professional advancement in sterile processing and central service departments. This exam covers sterilization methods, infection prevention, decontamination procedures, surgical instrumentation, quality assurance practices, regulatory compliance, microbiology principles, packaging systems, storage standards, and patient safety requirements. Participants develop a strong understanding of healthcare sterilization protocols, equipment operation, workflow management, and industry best practices necessary for success in board certification examinations and healthcare environments.

Vista previa del contenido

Sterile Processing Board Ultimate Exam
**Question 1.** Which USP <797> classification applies to a sterile preparation that contains a
hazardous drug and is compounded using a closed system isolator?

A) Low-risk

B) Medium-risk

C) High-risk

D) Category 2

**Answer:** C

**Explanation:** Hazardous drugs compounded in a closed system are considered high-risk because of
the added potential for worker exposure and the need for stricter containment.



**Question 2.** The primary purpose of the “first-air” principle in a laminar airflow workbench is to:

A) Reduce temperature fluctuations within the work area

B) Direct filtered air over the aseptic work surface before it contacts the product

C) Increase the speed of air exchange in the room

D) Provide a backup filtration system in case of HEPA failure

**Answer:** B

**Explanation:** First-air ensures that HEPA-filtered air reaches the work surface first, minimizing
contamination from the environment.



**Question 3.** In a 503B outsourcing facility, which of the following is required for each compounded
sterile preparation (CSP) that is not otherwise FDA-approved?

A) A USP <797> compliance audit only

B) A patient-specific prescription from a licensed prescriber

C) A bulk-drug purchase record only

D) No documentation is required because the facility is exempt

**Answer:** B

, Sterile Processing Board Ultimate Exam
**Explanation:** 503B facilities must compound based on a valid prescription; USP compliance alone is
insufficient.



**Question 4.** Which of the following statements correctly describes a “segregated compounding
area” (SCA)?

A) It is a separate room that meets ISO Class 5 standards without any additional engineering controls.

B) It is a designated space within a cleanroom that provides an additional barrier for high-risk CSPs.

C) It is a non-controlled environment used for low-risk compounding only.

D) It is synonymous with the ante-room.

**Answer:** B

**Explanation:** An SCA is a physically separated area within a cleanroom that adds an extra
containment layer for high-risk preparations.



**Question 5.** The most appropriate action when a technician discovers a broken ampoule during
compounding is to:

A) Continue using the remaining portion of the ampoule after wiping the exterior with alcohol.

B) Discard the ampoule, document the incident, and retrieve a new, intact ampoule.

C) Transfer the contents to a new vial using a sterile transfer device without reporting.

D) Finish the preparation and note the breakage on the label.

**Answer:** B

**Explanation:** Broken containers pose a contamination risk; they must be discarded and the event
recorded.



**Question 6.** Which of the following hand-hygiene techniques meets USP <797> requirements for
aseptic personnel?

A) Rubbing hands with soap for 15 seconds, rinsing, and drying with a cloth towel.

B) Using an alcohol-based hand rub for 20 seconds without prior washing.

, Sterile Processing Board Ultimate Exam
C) Scrubbing hands with an antimicrobial soap for at least 2 minutes, rinsing, and drying with a
disposable towel.

D) Washing hands with plain water for 30 seconds, then air-drying.

**Answer:** C

**Explanation:** USP mandates a minimum 2-minute scrub with an antimicrobial agent, followed by
thorough rinsing and drying with a disposable towel.



**Question 7.** In a cleanroom, the pressure differential between the buffer room (ISO 7) and the
ante-room (ISO 8) should be:

A) Buffer room lower pressure than ante-room

B) Buffer room higher pressure than ante-room

C) Equal pressure to prevent air movement

D) Variable pressure depending on the time of day

**Answer:** B

**Explanation:** Positive pressure in the cleaner buffer room prevents unfiltered air from entering from
the less clean ante-room.



**Question 8.** Which type of HEPA filter efficiency is required for USP <797> compliant primary
engineering controls?

A) 85 % removal of 0.3 µm particles

B) 95 % removal of 0.5 µm particles

C) 99.97 % removal of 0.3 µm particles

D) 99 % removal of 1.0 µm particles

**Answer:** C

**Explanation:** HEPA filters must capture at least 99.97 % of particles ≥0.3 µm, the most penetrating
particle size.

, Sterile Processing Board Ultimate Exam
**Question 9.** The “never-touch” zone on a sterile vial includes:

A) The rubber stopper only

B) The entire exterior surface of the vial

C) The portion of the stopper that will be contacted by the needle hub

D) The area of the stopper that will be penetrated by the needle tip

**Answer:** D

**Explanation:** Only the puncture site is permitted to be touched; the rest of the stopper must remain
untouched to avoid contamination.



**Question 10.** When compounding a high-risk hazardous drug using a biological safety cabinet (BSC),
which airflow direction is required?

A) Horizontal laminar flow from the back to the front

B) Downward vertical laminar flow from the top to the work surface

C) Upward vertical flow from the work surface to the top

D) No specific airflow direction is mandated for hazardous drugs

**Answer:** B

**Explanation:** BSCs for hazardous drugs use a downward vertical laminar flow to protect the worker
and contain aerosols.



**Question 11.** A pharmacist performs the final verification of a CSP. Which element is NOT part of
the verification process?

A) Confirming that the label matches the prescription

B) Checking that the preparation was performed in a cleanroom with proper temperature logs

C) Verifying that the correct compounding calculations were used

D) Performing a visual inspection of the final product for particulate matter

**Answer:** B

Información del documento

Subido en
19 de junio de 2026
Número de páginas
91
Escrito en
2025/2026
Tipo
Examen
Contiene
Preguntas y respuestas
$50.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
nikhiljain22
3.5
(278)
Vendido
1187
Seguidores
47
Artículos
55759
Última venta
16 horas hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes