CSLB GENERAL B PRACTICE QUESTIONS
CERTIFICATION REVIEW ACTUAL
QUESTIONS WITH COMPLETE ANSWERS
100 PERCENT VERIFIED LATEST
⩥ fire blocking from 2x material will provide how much fire
blocking.
Answer: 1 hour
⩥ when building a deck, it may be necessary to use blocking
between joist.
Answer: blocking is required at the begining of any overhang
⩥ for u shaped kitchens what is the min clearance requirement
between all opposing base cabinets, counter tops, or walls.
Answer: 60 inches
⩥ when running utilities through stud walls it may be necessary
to bore holes through studs. if the size of the hole is more than
40% of the depth of the stud then.
,Answer: it is allowed if the studs are doubled and the hole is less
than 60% of the width
⩥ when attaching boards to a deck it is important to.
Answer: space boards at least 1/8th inch
⩥ connection between a rafter and a double top plate requires.
Answer: 10d nails
⩥ max height for laterally unsupported 2x4 inch non-bearing
wall stud.
Answer: 14'
⩥ when building decks with a beam and joist design, it is
allowed to splice beam if.
Answer: the splice is over a post
⩥ max height for a laterally unsupported 2x4 inch bearing wall
stud.
Answer: 10'
, ⩥ max spacing of 2x4 inch studs on a 1 story house.
Answer: 24" o.c.
⩥ when are studs doubled.
Answer: in load bearing walls with hole exceeding 40% of the
stud depth
⩥ tool used to cut 2-inch diameter into lumber.
Answer: hole saw
⩥ in some cases nail performance can be improved by driving it
at an angle this can.
Answer: improve withdrawal resistance
⩥ usual spacing for cripples.
Answer: same as studs
⩥ single-ply.
Answer: membrane roofing system that uses polymer-based
synthetic material in flexible sheet or liquid form as an
alternative to traditional built-up roofing
CERTIFICATION REVIEW ACTUAL
QUESTIONS WITH COMPLETE ANSWERS
100 PERCENT VERIFIED LATEST
⩥ fire blocking from 2x material will provide how much fire
blocking.
Answer: 1 hour
⩥ when building a deck, it may be necessary to use blocking
between joist.
Answer: blocking is required at the begining of any overhang
⩥ for u shaped kitchens what is the min clearance requirement
between all opposing base cabinets, counter tops, or walls.
Answer: 60 inches
⩥ when running utilities through stud walls it may be necessary
to bore holes through studs. if the size of the hole is more than
40% of the depth of the stud then.
,Answer: it is allowed if the studs are doubled and the hole is less
than 60% of the width
⩥ when attaching boards to a deck it is important to.
Answer: space boards at least 1/8th inch
⩥ connection between a rafter and a double top plate requires.
Answer: 10d nails
⩥ max height for laterally unsupported 2x4 inch non-bearing
wall stud.
Answer: 14'
⩥ when building decks with a beam and joist design, it is
allowed to splice beam if.
Answer: the splice is over a post
⩥ max height for a laterally unsupported 2x4 inch bearing wall
stud.
Answer: 10'
, ⩥ max spacing of 2x4 inch studs on a 1 story house.
Answer: 24" o.c.
⩥ when are studs doubled.
Answer: in load bearing walls with hole exceeding 40% of the
stud depth
⩥ tool used to cut 2-inch diameter into lumber.
Answer: hole saw
⩥ in some cases nail performance can be improved by driving it
at an angle this can.
Answer: improve withdrawal resistance
⩥ usual spacing for cripples.
Answer: same as studs
⩥ single-ply.
Answer: membrane roofing system that uses polymer-based
synthetic material in flexible sheet or liquid form as an
alternative to traditional built-up roofing
