VA HIC Exam Prep – Complete Study Guide
Questions and 100% Verified Answers
1. Enter and proceed" is presented as a on theraisedtouchablesurface
on a function key."
a. Triangle
b. DoubleLine
c. Circle
d. Dotted Line: c. Circle
2. In new buildings, thresholds at doorways should be no higher than .
a. 1/2"
b. 1-1/4"
c. 3/4"
d. 1/4": a. 1/2"
3. The maximum knee clearance shall be permitted to extendunderan
elementthat is 9" abovethe floor.
a. 30"
b. 18"
c. 36"
d. 25": d. 25"
4. In existing buildings and facilities, the turning spaceshall be a circular space
with a minimum diameter.
a. 60 -inch
,b. 50-inch
c. 70-inch
d. 55-inch: a. 60-inch
5. The brightness of the elevator car landing sill, threshold platform and con-
trols are to be no less than foot candles.
a. 15
b. 10
,c. 54
d. 5: d. 5
6. The clear width of an exterior accessible route located within seating areas
shall be minimum.
a. 42 inches
b. 48 inches
c. 36 inches
d. 32 inches: c. 36 inches
7. In a Type A unit, if measuringto the highestpart of the rim or highest
part of thecounter,whatis themaximumheightof thesink frontabovethe
floor?
a. 28"
b. 34"
c. 36"
d. 32": b. 34"
8. What is the least diameter of grab bars with circular cross sections?
a. 1"
b. 2"
c. 1-1/4"
d. 1-1/2": c. 1-1/4"
9. All hardwaresuch as handles,locks, or any otheroperableparts shall be
minimumabovethefloor.
a. 30"
b. 34"
, c. 36"
d. 20": b. 34"
10. Whatis theminimumdiameterof a circular turnaroundareain a
new building.
a. 67"
Questions and 100% Verified Answers
1. Enter and proceed" is presented as a on theraisedtouchablesurface
on a function key."
a. Triangle
b. DoubleLine
c. Circle
d. Dotted Line: c. Circle
2. In new buildings, thresholds at doorways should be no higher than .
a. 1/2"
b. 1-1/4"
c. 3/4"
d. 1/4": a. 1/2"
3. The maximum knee clearance shall be permitted to extendunderan
elementthat is 9" abovethe floor.
a. 30"
b. 18"
c. 36"
d. 25": d. 25"
4. In existing buildings and facilities, the turning spaceshall be a circular space
with a minimum diameter.
a. 60 -inch
,b. 50-inch
c. 70-inch
d. 55-inch: a. 60-inch
5. The brightness of the elevator car landing sill, threshold platform and con-
trols are to be no less than foot candles.
a. 15
b. 10
,c. 54
d. 5: d. 5
6. The clear width of an exterior accessible route located within seating areas
shall be minimum.
a. 42 inches
b. 48 inches
c. 36 inches
d. 32 inches: c. 36 inches
7. In a Type A unit, if measuringto the highestpart of the rim or highest
part of thecounter,whatis themaximumheightof thesink frontabovethe
floor?
a. 28"
b. 34"
c. 36"
d. 32": b. 34"
8. What is the least diameter of grab bars with circular cross sections?
a. 1"
b. 2"
c. 1-1/4"
d. 1-1/2": c. 1-1/4"
9. All hardwaresuch as handles,locks, or any otheroperableparts shall be
minimumabovethefloor.
a. 30"
b. 34"
, c. 36"
d. 20": b. 34"
10. Whatis theminimumdiameterof a circular turnaroundareain a
new building.
a. 67"
