CDI Powerful Exam Questions &
Answers Explained Simply
What is a LRMC and what is the general purpose of them? (CH. 10) - Correct
Answer ✔️✔️LOCAL MAINTENANCE REQUIREMENTS CARDS
for scheduled maintenance requirements not covered by other TM.
What is an ELMS? Where can it be located? (CH. 10) - Correct Answer ✔️✔
️ENHANCED LIBRARY MANAGEMENT SYSTEM
NATEC
What is the acronym NAMDRP? (CH. 10) - Correct Answer ✔️✔️NAVAL
AVIATION MAINTENANCE DISCREPANCY REPORTING PROGRAM
establishes requirements for reporting deficiencies that impact naval aviation
aircraft and equipment due to substandard materials, workmanship, and
technical publications.
What is the purpose of NAMDRP? (CH. 10) - Correct Answer ✔️✔
️requirements for reporting deficiencies that impact naval aviation aircraft and
,equipment due to substandard materials, workmanship, and technical
publications.
What reports are covered in NAMDRP? (CH. 10) - Correct Answer ✔️✔
️Aircraft Delivery Deficiency Reports (ADDR)
Acceptance Inspection Deficiency Reports (AIDR)
Baseline Trouble Reports (BTR)
Hazardous Material Reports (HMR)
Product Quality Deficiency Reports (PQDR)
Technical Publication Deficiency Reports (TPDR)
What is the difference between a CAT I and CAT II in general terms? (Not specific
to any discrepancy report) (CH. 10) - Correct Answer ✔️✔️Category 1 (CAT
1 or CAT I) DRs are used to describe deficiencies, discrepancies, and defects that
create a safety risk that could result in death or injury to personnel, risk of
damage to or loss of aircraft, equipment, or facilities.
,Category 2 (CAT 2 or CAT II) DRs are used to describe deficiencies, discrepancies
and defects that do not create a safety risk or potential for damage, but do pose a
risk to the quality of maintenance and operational readiness.
What is JDRS? (CH. 10) - Correct Answer ✔️✔️The Joint Deficiency
Reporting System (JDRS)
What reports are submitted through JDRS? (CH. 10) - Correct Answer ✔️✔
️will be used to submit ADDR, AIDR, BTR, HMR, PQDR (CAT I and II only), and
TPDR.
IF JDRS is NOT available, CAT I and CAT II's will be reported how? (CH. 10) -
Correct Answer ✔️✔️When JDRS is not accessible, CAT I and CAT II DRs will
be transmitted by naval message in the format shown in the HMR Report
Message Template (Figure 10.9-1), Category 1 Technical Publication Deficiency
Report (Figure 10.9-2) or Baseline Trouble Report Message (Figure 10.9-3).
Priority precedence will be used for CAT I DR messages. Routine precedence will
be used for CAT II messages.
What is an RCN and how are they generated? Give an example. (CH. 10) - Correct
Answer ✔️✔️Report Control Number (RCN)
, The originating activity must assign a RCN to each DR in the following format:
a. Element (1) - Service Designator Code (N, V, or R) of the originating activity.
• Use "N" for Navy and Marine Corps aviation non-deploying units.
• Use "V" for Navy and Marine Corps Aviation Atlantic Fleet operating forces.
• Use "R" for Navy and Marine Corps Aviation Pacific Fleet operating forces.
b. Elements (2) through (6) - DODAAC/UIC of the originating activity, for example,
54056.
What is an AIDR? Who submits and AIDR? (CH. 10) - Correct Answer ✔️✔
️An AIDR must be submitted for all newly manufactured, modified, or newly
reworked aircraft, including Planned Maintenance Intervals (PMI) and other
scheduled Depot events.
What is a BTR? (No. It's a not broken tool report? I promise.) (CH. 10) - Correct
Answer ✔️✔️Baseline Trouble Report (BTR)
BTR will be submitted for Naval Aviation Logistics Command Management
Information System (NALCOMIS) Optimized Organizational Maintenance Activity
(OOMA) baseline deficiencies that prevent the issuance of Work Order (WOs) for
Answers Explained Simply
What is a LRMC and what is the general purpose of them? (CH. 10) - Correct
Answer ✔️✔️LOCAL MAINTENANCE REQUIREMENTS CARDS
for scheduled maintenance requirements not covered by other TM.
What is an ELMS? Where can it be located? (CH. 10) - Correct Answer ✔️✔
️ENHANCED LIBRARY MANAGEMENT SYSTEM
NATEC
What is the acronym NAMDRP? (CH. 10) - Correct Answer ✔️✔️NAVAL
AVIATION MAINTENANCE DISCREPANCY REPORTING PROGRAM
establishes requirements for reporting deficiencies that impact naval aviation
aircraft and equipment due to substandard materials, workmanship, and
technical publications.
What is the purpose of NAMDRP? (CH. 10) - Correct Answer ✔️✔
️requirements for reporting deficiencies that impact naval aviation aircraft and
,equipment due to substandard materials, workmanship, and technical
publications.
What reports are covered in NAMDRP? (CH. 10) - Correct Answer ✔️✔
️Aircraft Delivery Deficiency Reports (ADDR)
Acceptance Inspection Deficiency Reports (AIDR)
Baseline Trouble Reports (BTR)
Hazardous Material Reports (HMR)
Product Quality Deficiency Reports (PQDR)
Technical Publication Deficiency Reports (TPDR)
What is the difference between a CAT I and CAT II in general terms? (Not specific
to any discrepancy report) (CH. 10) - Correct Answer ✔️✔️Category 1 (CAT
1 or CAT I) DRs are used to describe deficiencies, discrepancies, and defects that
create a safety risk that could result in death or injury to personnel, risk of
damage to or loss of aircraft, equipment, or facilities.
,Category 2 (CAT 2 or CAT II) DRs are used to describe deficiencies, discrepancies
and defects that do not create a safety risk or potential for damage, but do pose a
risk to the quality of maintenance and operational readiness.
What is JDRS? (CH. 10) - Correct Answer ✔️✔️The Joint Deficiency
Reporting System (JDRS)
What reports are submitted through JDRS? (CH. 10) - Correct Answer ✔️✔
️will be used to submit ADDR, AIDR, BTR, HMR, PQDR (CAT I and II only), and
TPDR.
IF JDRS is NOT available, CAT I and CAT II's will be reported how? (CH. 10) -
Correct Answer ✔️✔️When JDRS is not accessible, CAT I and CAT II DRs will
be transmitted by naval message in the format shown in the HMR Report
Message Template (Figure 10.9-1), Category 1 Technical Publication Deficiency
Report (Figure 10.9-2) or Baseline Trouble Report Message (Figure 10.9-3).
Priority precedence will be used for CAT I DR messages. Routine precedence will
be used for CAT II messages.
What is an RCN and how are they generated? Give an example. (CH. 10) - Correct
Answer ✔️✔️Report Control Number (RCN)
, The originating activity must assign a RCN to each DR in the following format:
a. Element (1) - Service Designator Code (N, V, or R) of the originating activity.
• Use "N" for Navy and Marine Corps aviation non-deploying units.
• Use "V" for Navy and Marine Corps Aviation Atlantic Fleet operating forces.
• Use "R" for Navy and Marine Corps Aviation Pacific Fleet operating forces.
b. Elements (2) through (6) - DODAAC/UIC of the originating activity, for example,
54056.
What is an AIDR? Who submits and AIDR? (CH. 10) - Correct Answer ✔️✔
️An AIDR must be submitted for all newly manufactured, modified, or newly
reworked aircraft, including Planned Maintenance Intervals (PMI) and other
scheduled Depot events.
What is a BTR? (No. It's a not broken tool report? I promise.) (CH. 10) - Correct
Answer ✔️✔️Baseline Trouble Report (BTR)
BTR will be submitted for Naval Aviation Logistics Command Management
Information System (NALCOMIS) Optimized Organizational Maintenance Activity
(OOMA) baseline deficiencies that prevent the issuance of Work Order (WOs) for
