FireTeam Test Questions With Correct
Answers
Nut - CORRECT ANSWER✔✔--> Washer -> Spring
| | | | | |
What do you use to tighten a bolt? - CORRECT ANSWER✔✔-Socket
| | | | | | | | | |
Gear question: If they want to go fast - CORRECT ANSWER✔✔-Bigger
| | | | | | | | | | |
gear goes faster
| |
Bolt goes through and comes out other side with washer and nut -
| | | | | | | | | | | | |
CORRECT ANSWER✔✔-Threaded end pointed away from you so it is not
| | | | | | | | | |
a hazard
| |
What do you use to cut a bolt? - CORRECT ANSWER✔✔-Hacksaw
| | | | | | | | | |
Unmelted material - CORRECT ANSWER✔✔-stop and call mechanic
| | | | | | |
Hopper - CORRECT ANSWER✔✔-Adjust how much comes out. DO NOT
| | | | | | | | | |
adjust speed of belt. | | |
, If it is not a matter of speed - CORRECT ANSWER✔✔-Adjust size of
| | | | | | | | | | | | |
opening. DO NOT adjust speed | | | |
What do you do when the first grinder stops? - CORRECT ANSWER✔✔-
| | | | | | | | | | |
Jam
Grinder jam - CORRECT ANSWER✔✔-Reverse manually
| | | | |
How to remove molding station arm? - CORRECT ANSWER✔✔-Loosen
| | | | | | | | |
middle nut then remove end nut
| | | | |
What is wrong if water is pouring over the edge? - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-Green filter clogged | |
Water tank is rising too quickly - CORRECT ANSWER✔✔-Reduce amount
| | | | | | | | |
of fresh water
| | |
What is the purpose of washing in a shake motion? - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-Wash all sides of the material | | | | |
Washing station: one pipe has four pipes the other has one spout at the
| | | | | | | | | | | | | |
end, which has the most pressure? - CORRECT ANSWER✔✔-1
| | | | | | | |
spout/head has most pressure
| | | |
Answers
Nut - CORRECT ANSWER✔✔--> Washer -> Spring
| | | | | |
What do you use to tighten a bolt? - CORRECT ANSWER✔✔-Socket
| | | | | | | | | |
Gear question: If they want to go fast - CORRECT ANSWER✔✔-Bigger
| | | | | | | | | | |
gear goes faster
| |
Bolt goes through and comes out other side with washer and nut -
| | | | | | | | | | | | |
CORRECT ANSWER✔✔-Threaded end pointed away from you so it is not
| | | | | | | | | |
a hazard
| |
What do you use to cut a bolt? - CORRECT ANSWER✔✔-Hacksaw
| | | | | | | | | |
Unmelted material - CORRECT ANSWER✔✔-stop and call mechanic
| | | | | | |
Hopper - CORRECT ANSWER✔✔-Adjust how much comes out. DO NOT
| | | | | | | | | |
adjust speed of belt. | | |
, If it is not a matter of speed - CORRECT ANSWER✔✔-Adjust size of
| | | | | | | | | | | | |
opening. DO NOT adjust speed | | | |
What do you do when the first grinder stops? - CORRECT ANSWER✔✔-
| | | | | | | | | | |
Jam
Grinder jam - CORRECT ANSWER✔✔-Reverse manually
| | | | |
How to remove molding station arm? - CORRECT ANSWER✔✔-Loosen
| | | | | | | | |
middle nut then remove end nut
| | | | |
What is wrong if water is pouring over the edge? - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-Green filter clogged | |
Water tank is rising too quickly - CORRECT ANSWER✔✔-Reduce amount
| | | | | | | | |
of fresh water
| | |
What is the purpose of washing in a shake motion? - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-Wash all sides of the material | | | | |
Washing station: one pipe has four pipes the other has one spout at the
| | | | | | | | | | | | | |
end, which has the most pressure? - CORRECT ANSWER✔✔-1
| | | | | | | |
spout/head has most pressure
| | | |
