NICET Level 1 Highway Construction
Exam 2025/2026 – All 160 Actual
Questions with Correct Answers (Graded
A+)
Topic 1: Blueprint Reading & Plan Interpretation (Questions 1-25)
1. How many types of views are typically found in construction blueprints?
• A) 1
• B) 2
• C) 3
• D) 4
,,,,answer,,,,: C
Rationale: Plan view (from above), elevation/profile view (from front/side), and
cross-section view (cut open) are the three standard views .
2. What is the first sheet in a set of project plans called?
• A) Summary of quantities sheet
• B) Title or key sheet
• C) Typical section sheet
• D) Profile sheet
,,,,,answer,,,,: B
Rationale: The title or key sheet is introductory, containing project name, location,
sheet index, and approval signatures .
3. What does a typical section sheet show?
• A) Elevation views of the proposed road
• B) Plan view of the roadway alignment
• C) Different layers of the road and side slopes/ditches
• D) Underground utility locations
,,,,answer,,,,: C
Rationale: Typical section sheets show cross-section views of proposed roadway
layers, side slopes, and ditches at specified points .
4. Where would you find the shape of the road's side slopes and ditches?
• A) Profile sheets
• B) Plan sheets
• C) Typical section sheets
• D) Cross-section sheets
,,,,answer,,,,: C
Rationale: Both typical section sheets and cross-section sheets show slope/ditch
information, but typical sections specifically show the design template .
5. What is the diameter of a #4 reinforcing bar?
• A) 0.25 inches
• B) 0.50 inches
• C) 0.75 inches
• D) 1.00 inch
,,,,,answer,,,,: B
Rationale: Rebar diameter = number size ÷ 8. #4 ÷ 8 = 0.5 inches .
6. What is the diameter of a #6 reinforcing bar?
• A) 0.50 inches
• B) 0.625 inches
• C) 0.75 inches
• D) 1.00 inch
,,,,answer,,,,: C
Rationale: #6 ÷ 8 = 0.75 inches .
7. What is the diameter of a #8 reinforcing bar?
• A) 0.75 inches
• B) 0.875 inches
• C) 1.00 inch
• D) 1.125 inches
,,,,answer,,,,: C
Rationale: #8 ÷ 8 = 1.00 inch .
8. The note "½" = 100'" on a plan sheet means:
• A) 0.5 inches on the drawing equals 100 feet on the ground
• B) 100 feet on the drawing equals 0.5 inches on the ground
• C) The scale is 1:100
• D) The drawing is not to scale
,,,,answer,,,,: A
Rationale: This is a standard engineer's scale notation indicating the relationship
between drawing and actual dimensions .
9. Distances shown on construction plans are always measured:
, • A) Along the slope of the ground
• B) Horizontally or vertically, never along the slope
• C) On a 45-degree angle
• D) By using a ruler on the plan sheet
,,,,answer,,,,: B
Rationale: Plan distances represent horizontal projections, not slope distances .
10. Why should you avoid measuring distances on plan sheets with a ruler?
• A) Rulers are not accurate enough
• B) Copies may be reduced in size, changing the scale
• C) Plan sheets have no scale
• D) It is illegal to measure plans
,,,,answer,,,,: B
Rationale: Copies blur lines and may be intentionally or accidentally reduced,
altering the scale .
11. What sheet depicts the cross-section view of the road superimposed on the
natural ground line?
• A) Typical section sheet
• B) Profile sheet
• C) Cross-section sheet
• D) Plan sheet
,,,,answer,,,,: C
Rationale: Cross-section sheets show existing ground line with proposed roadway
superimposed .
12. The directional arrow is typically found on which sheet?
• A) Profile sheet
Exam 2025/2026 – All 160 Actual
Questions with Correct Answers (Graded
A+)
Topic 1: Blueprint Reading & Plan Interpretation (Questions 1-25)
1. How many types of views are typically found in construction blueprints?
• A) 1
• B) 2
• C) 3
• D) 4
,,,,answer,,,,: C
Rationale: Plan view (from above), elevation/profile view (from front/side), and
cross-section view (cut open) are the three standard views .
2. What is the first sheet in a set of project plans called?
• A) Summary of quantities sheet
• B) Title or key sheet
• C) Typical section sheet
• D) Profile sheet
,,,,,answer,,,,: B
Rationale: The title or key sheet is introductory, containing project name, location,
sheet index, and approval signatures .
3. What does a typical section sheet show?
• A) Elevation views of the proposed road
• B) Plan view of the roadway alignment
• C) Different layers of the road and side slopes/ditches
• D) Underground utility locations
,,,,answer,,,,: C
Rationale: Typical section sheets show cross-section views of proposed roadway
layers, side slopes, and ditches at specified points .
4. Where would you find the shape of the road's side slopes and ditches?
• A) Profile sheets
• B) Plan sheets
• C) Typical section sheets
• D) Cross-section sheets
,,,,answer,,,,: C
Rationale: Both typical section sheets and cross-section sheets show slope/ditch
information, but typical sections specifically show the design template .
5. What is the diameter of a #4 reinforcing bar?
• A) 0.25 inches
• B) 0.50 inches
• C) 0.75 inches
• D) 1.00 inch
,,,,,answer,,,,: B
Rationale: Rebar diameter = number size ÷ 8. #4 ÷ 8 = 0.5 inches .
6. What is the diameter of a #6 reinforcing bar?
• A) 0.50 inches
• B) 0.625 inches
• C) 0.75 inches
• D) 1.00 inch
,,,,answer,,,,: C
Rationale: #6 ÷ 8 = 0.75 inches .
7. What is the diameter of a #8 reinforcing bar?
• A) 0.75 inches
• B) 0.875 inches
• C) 1.00 inch
• D) 1.125 inches
,,,,answer,,,,: C
Rationale: #8 ÷ 8 = 1.00 inch .
8. The note "½" = 100'" on a plan sheet means:
• A) 0.5 inches on the drawing equals 100 feet on the ground
• B) 100 feet on the drawing equals 0.5 inches on the ground
• C) The scale is 1:100
• D) The drawing is not to scale
,,,,answer,,,,: A
Rationale: This is a standard engineer's scale notation indicating the relationship
between drawing and actual dimensions .
9. Distances shown on construction plans are always measured:
, • A) Along the slope of the ground
• B) Horizontally or vertically, never along the slope
• C) On a 45-degree angle
• D) By using a ruler on the plan sheet
,,,,answer,,,,: B
Rationale: Plan distances represent horizontal projections, not slope distances .
10. Why should you avoid measuring distances on plan sheets with a ruler?
• A) Rulers are not accurate enough
• B) Copies may be reduced in size, changing the scale
• C) Plan sheets have no scale
• D) It is illegal to measure plans
,,,,answer,,,,: B
Rationale: Copies blur lines and may be intentionally or accidentally reduced,
altering the scale .
11. What sheet depicts the cross-section view of the road superimposed on the
natural ground line?
• A) Typical section sheet
• B) Profile sheet
• C) Cross-section sheet
• D) Plan sheet
,,,,answer,,,,: C
Rationale: Cross-section sheets show existing ground line with proposed roadway
superimposed .
12. The directional arrow is typically found on which sheet?
• A) Profile sheet
