AVIXA CTS Exam Questions with 100% Correct Answers
100% Correct 93
Incorrect 0
1 of 94
Term
A component fails in the first month after an install. What is the BEST
mechanism for the client to have it replaced?
Awesome!
Service Agreement Purchase a new component
System Warranty Manufacturers warranty
Don't know?
2 of 94
Term
,What should the specific capabilities of the AV systems defined in the
Program Report be based on?
Give this one a try later!
Manufacturer recommendations What the selected integrator markets
Identified needs of the end user The results of the site survey
Don't know?
3 of 94
Term
What should be done first if a control system's touch screen is reported
as locked, frozen, or otherwise not functioning?
Give this one a try later!
Use a voltage meter to check for
Reroute all systems to the
continuity, remove mother board and
nearest functioning system
switch it out
Check all connectors; Remove the device, switch it out and
confirm the screen is not in return it to the manufacturer for
power saver mode diagnostic checks
, Don't know?
4 of 94
Term
______________ is a best practice when troubleshooting an AV system.
Give this one a try later!
Reset configuration files to default Randomly push buttons
Re-test after each change Disabling all user features
Don't know?
5 of 94
Term
What is the aspect ratio of a screen that has a height of 29.5 inches
(74.9 cm) and a diagonal of inches 60 inches (152.4 cm)?
Give this one a try later!
16:9 5:4
, 4:3 16:9
Don't know?
6 of 94
Term
To minimize interference when running cables for microphone and
power from the rack to the room, it is MOST important to
Give this one a try later!
create as much space
between them when parallel , terminate their ground
and cross at 90 degree connections together
angles when
perpendicular.
specify a conduit with sufficient
specify twisted pair cabling when
capacity to meet the fill ratio
creating the bill of materials
requirements of the local authority
having jurisdiction.
Don't know?
7 of 94
Term
100% Correct 93
Incorrect 0
1 of 94
Term
A component fails in the first month after an install. What is the BEST
mechanism for the client to have it replaced?
Awesome!
Service Agreement Purchase a new component
System Warranty Manufacturers warranty
Don't know?
2 of 94
Term
,What should the specific capabilities of the AV systems defined in the
Program Report be based on?
Give this one a try later!
Manufacturer recommendations What the selected integrator markets
Identified needs of the end user The results of the site survey
Don't know?
3 of 94
Term
What should be done first if a control system's touch screen is reported
as locked, frozen, or otherwise not functioning?
Give this one a try later!
Use a voltage meter to check for
Reroute all systems to the
continuity, remove mother board and
nearest functioning system
switch it out
Check all connectors; Remove the device, switch it out and
confirm the screen is not in return it to the manufacturer for
power saver mode diagnostic checks
, Don't know?
4 of 94
Term
______________ is a best practice when troubleshooting an AV system.
Give this one a try later!
Reset configuration files to default Randomly push buttons
Re-test after each change Disabling all user features
Don't know?
5 of 94
Term
What is the aspect ratio of a screen that has a height of 29.5 inches
(74.9 cm) and a diagonal of inches 60 inches (152.4 cm)?
Give this one a try later!
16:9 5:4
, 4:3 16:9
Don't know?
6 of 94
Term
To minimize interference when running cables for microphone and
power from the rack to the room, it is MOST important to
Give this one a try later!
create as much space
between them when parallel , terminate their ground
and cross at 90 degree connections together
angles when
perpendicular.
specify a conduit with sufficient
specify twisted pair cabling when
capacity to meet the fill ratio
creating the bill of materials
requirements of the local authority
having jurisdiction.
Don't know?
7 of 94
Term
