CPL250 Facility - Laboratory –Section Test
Practice 2026
1. What type of record do you need to Procedure record
build so that Users can order a test?
2. What do you need to build so users Result Component (LRR)
can enter numeric or category based
results for a test?
3. What is built to allow the system to Test record (OVT)
know what the lab should perform
when a certain procedure is ordered,
and in which lab?
4. A numeric result can be automatically An equation (FCE)
calculated using what?
5. What do you build to apply common Mnemonic (OVD)
discrete results to a test?
6. This is what is build so a test and a Questionnaire (LQF)
question can be linked together
7. What must be build first a Question or Questionnaire
Questionnaire?
8. Which of the following records is most The test (OVT) record should be built last because in
efficient to build last, and why? the test record you link out to the result component
- Result component (LRR) and procedure record (EAP) so it is more
-Test eflcient if those records are built 1st so you don't
-Procedure have to keep going in and our of records to link
them together.
9. No, it does not matter because the result compo-
nents (LRR) are not linked directly to the procedure.
1/5
, CPL250 Facility - Laboratory –Section Test
Practice 2026
Does it matter for efficiency if result
components are listed before proce-
dures? Why or why not?
10. All test collected into your department Department record (DEP)
that can be performed at the CJB West
lab should be accessioned there. IF
a test cannot be performed there, it
should be performed at the EMG Hos-
pital Lab instead.
In which record will you specify the
order of labs that the system should
try to accession specimens to?
11. In which record will you specify which Test (OVT)
lab a test can actually be performed
in?
12. Many settings that apply to all of the Facility record level
labs in your organization should be
made in which record to be most effi-
cient?
13. Any scenario that requires a special True
setup can be done at more specific
levels of the hierarchy, such as at the
lab or test record level.
14. Settings in the laboratory (LDF) Record Only that Laboratory.
effect who?
15. Section Records (LDF)
2/5
Practice 2026
1. What type of record do you need to Procedure record
build so that Users can order a test?
2. What do you need to build so users Result Component (LRR)
can enter numeric or category based
results for a test?
3. What is built to allow the system to Test record (OVT)
know what the lab should perform
when a certain procedure is ordered,
and in which lab?
4. A numeric result can be automatically An equation (FCE)
calculated using what?
5. What do you build to apply common Mnemonic (OVD)
discrete results to a test?
6. This is what is build so a test and a Questionnaire (LQF)
question can be linked together
7. What must be build first a Question or Questionnaire
Questionnaire?
8. Which of the following records is most The test (OVT) record should be built last because in
efficient to build last, and why? the test record you link out to the result component
- Result component (LRR) and procedure record (EAP) so it is more
-Test eflcient if those records are built 1st so you don't
-Procedure have to keep going in and our of records to link
them together.
9. No, it does not matter because the result compo-
nents (LRR) are not linked directly to the procedure.
1/5
, CPL250 Facility - Laboratory –Section Test
Practice 2026
Does it matter for efficiency if result
components are listed before proce-
dures? Why or why not?
10. All test collected into your department Department record (DEP)
that can be performed at the CJB West
lab should be accessioned there. IF
a test cannot be performed there, it
should be performed at the EMG Hos-
pital Lab instead.
In which record will you specify the
order of labs that the system should
try to accession specimens to?
11. In which record will you specify which Test (OVT)
lab a test can actually be performed
in?
12. Many settings that apply to all of the Facility record level
labs in your organization should be
made in which record to be most effi-
cient?
13. Any scenario that requires a special True
setup can be done at more specific
levels of the hierarchy, such as at the
lab or test record level.
14. Settings in the laboratory (LDF) Record Only that Laboratory.
effect who?
15. Section Records (LDF)
2/5
