FSRT Study Guide with all Correct & 100% Verified
Answers |Actual Complete Exam |Already Graded A+
Technicians should not decide they will be able to restore a damaged item until they have _________
the item and communicated with the customer. ✔Correct Answer-pre-tested
The restoration company works for the property owner, who is the primary customer. A secondary
customer is the _________________ ________ when the property owner is an _________________.
✔Correct Answer-insurance carrier
insured
Smoke and soot particles are visual by-products of _________________ _________________.
✔Correct Answer-incomplete combustion.
Heat, fuel and oxygen are the key elements required for _________________. ✔Correct Answer-
combustion
The particle size range of combustion smoke particles is _________________ to _________________
microns. ✔Correct Answer-0.1
4
The general categories into which all smoke residues may be placed are PAH (Polycyclic Aromatic
Hydrocarbons) and _________________. ✔Correct Answer-soot
Both PAH and soot particles have been reported to be _________________ to humans. ✔Correct
Answer-carcinogenic
A very difficult smoke odor for technicians to overcome is the _________________ odor, also called
"psychological" odor. ✔Correct Answer-heightened awareness
To remove high levels of protein odor from surfaces, _________________ is usually required for
cleaning protein residues. ✔Correct Answer-wet cleaning
When burned, this material will produce a thick, heavy black smeary residue. ✔Correct Answer-
synthetic
Factors to consider in determining the degree of smoke contamination throughout a structure are
the air _________________ and _________________ generated during combustion. ✔Correct
Answer-pressures
temperatures
The severity of soot contamination increases with a ________ of oxygen and decreases when a
_________ _______ of oxygen is present during the fire. ✔Correct Answer-lack
greater quantity
Some materials and surfaces naturally adsorb more odors than others. The odor control industry
refers to them as '_________________' ✔Correct Answer-natural wicks
, During a fire, smoke can carry vaporized oils, which eventually settle to leave an _________________
on surfaces, which is difficult to remove. ✔Correct Answer-oily film
Lighter plastic surfaces subjected to higher temperatures and soot have potential to
_________________ irreversibly. ✔Correct Answer-discolor (yellow)
From a common sense perspective, safety on the job site is the responsibly of _________________.
✔Correct Answer-everyone
Safety regulations require companies to prepare a hazardous chemical program, issue appropriate
safety _________________ to employees, and provide them with safety _________________.
✔Correct Answer-equipment
training
Restorers may obtain the most accurate information about potential chemical safety from:
_________________ sheets, labels and _________________. ✔Correct Answer-safety data
training
All restoration chemicals must be kept in properly _________________ containers and secured on
the job site. ✔Correct Answer-labeled
Advise the chemically-sensitive customers to not be _________________ the affected areas while
work is being performed and ask for their _________________ consent of product use. ✔Correct
Answer-in
informed
When working for a customer who is chemically _________________, there may be need for special
air scrubbing, cleaning agents and deodorizing agents. ✔Correct Answer-sensitive
When working in areas containing loose soot residue, it is highly recommended that restorers use
appropriate _________________ air scrubbers and don _________________. ✔Correct Answer-
HEPA
PPE
_________________ and _________________ are two commonly found invisible safety hazards to
be aware of within older structures. ✔Correct Answer-Lead
Asbestos
_________________ is a heavy metal that was commonly incorporated into paint formulations.
✔Correct Answer-Lead
_________________ was used in various building materials (siding, roofing, flooring, adhesives) as
an insulating and fire-retarding materials. ✔Correct Answer-Asbestos
Toxic materials such as lead and asbestos are most likely to be released from painted surfaces into
the air during sanding and _________________. ✔Correct Answer-demolition
The most important PPE to wear when working in environments where toxic particles may exist is a
_________________ respirator. Engineering controls should also be utilized. ✔Correct Answer-
HEPA
Answers |Actual Complete Exam |Already Graded A+
Technicians should not decide they will be able to restore a damaged item until they have _________
the item and communicated with the customer. ✔Correct Answer-pre-tested
The restoration company works for the property owner, who is the primary customer. A secondary
customer is the _________________ ________ when the property owner is an _________________.
✔Correct Answer-insurance carrier
insured
Smoke and soot particles are visual by-products of _________________ _________________.
✔Correct Answer-incomplete combustion.
Heat, fuel and oxygen are the key elements required for _________________. ✔Correct Answer-
combustion
The particle size range of combustion smoke particles is _________________ to _________________
microns. ✔Correct Answer-0.1
4
The general categories into which all smoke residues may be placed are PAH (Polycyclic Aromatic
Hydrocarbons) and _________________. ✔Correct Answer-soot
Both PAH and soot particles have been reported to be _________________ to humans. ✔Correct
Answer-carcinogenic
A very difficult smoke odor for technicians to overcome is the _________________ odor, also called
"psychological" odor. ✔Correct Answer-heightened awareness
To remove high levels of protein odor from surfaces, _________________ is usually required for
cleaning protein residues. ✔Correct Answer-wet cleaning
When burned, this material will produce a thick, heavy black smeary residue. ✔Correct Answer-
synthetic
Factors to consider in determining the degree of smoke contamination throughout a structure are
the air _________________ and _________________ generated during combustion. ✔Correct
Answer-pressures
temperatures
The severity of soot contamination increases with a ________ of oxygen and decreases when a
_________ _______ of oxygen is present during the fire. ✔Correct Answer-lack
greater quantity
Some materials and surfaces naturally adsorb more odors than others. The odor control industry
refers to them as '_________________' ✔Correct Answer-natural wicks
, During a fire, smoke can carry vaporized oils, which eventually settle to leave an _________________
on surfaces, which is difficult to remove. ✔Correct Answer-oily film
Lighter plastic surfaces subjected to higher temperatures and soot have potential to
_________________ irreversibly. ✔Correct Answer-discolor (yellow)
From a common sense perspective, safety on the job site is the responsibly of _________________.
✔Correct Answer-everyone
Safety regulations require companies to prepare a hazardous chemical program, issue appropriate
safety _________________ to employees, and provide them with safety _________________.
✔Correct Answer-equipment
training
Restorers may obtain the most accurate information about potential chemical safety from:
_________________ sheets, labels and _________________. ✔Correct Answer-safety data
training
All restoration chemicals must be kept in properly _________________ containers and secured on
the job site. ✔Correct Answer-labeled
Advise the chemically-sensitive customers to not be _________________ the affected areas while
work is being performed and ask for their _________________ consent of product use. ✔Correct
Answer-in
informed
When working for a customer who is chemically _________________, there may be need for special
air scrubbing, cleaning agents and deodorizing agents. ✔Correct Answer-sensitive
When working in areas containing loose soot residue, it is highly recommended that restorers use
appropriate _________________ air scrubbers and don _________________. ✔Correct Answer-
HEPA
PPE
_________________ and _________________ are two commonly found invisible safety hazards to
be aware of within older structures. ✔Correct Answer-Lead
Asbestos
_________________ is a heavy metal that was commonly incorporated into paint formulations.
✔Correct Answer-Lead
_________________ was used in various building materials (siding, roofing, flooring, adhesives) as
an insulating and fire-retarding materials. ✔Correct Answer-Asbestos
Toxic materials such as lead and asbestos are most likely to be released from painted surfaces into
the air during sanding and _________________. ✔Correct Answer-demolition
The most important PPE to wear when working in environments where toxic particles may exist is a
_________________ respirator. Engineering controls should also be utilized. ✔Correct Answer-
HEPA
