D2-WATERDISTRIBUTIONOPERATOREXAM s s s s s
(CALIFORNIA) QUESTIONS WITH CORRECT
s s s s
ANSWERS 2025 s s
Three sources of supply -RCORRECT ANSWER -
s s s s s s
Surface water treatment plants, Import/Purchased water, and Wells.
s s s s s s s
Transmission Main - CORRECT ANSWER - s s s s s
ARvery large main designed to move water from one part of the system to another.
s s s s s s s s s s s s s s
Shut-Off Valve - CORRECT ANSWER - s s s s s
A type of valve the water company uses when they need to turn water off to a particular consumer.
s s s s s s s s s s s s s s s s s s
Where is a Shut-Off Valve typically located? - CORRECT ANSWER -
s s s s s s s s s s
Usually found connected to a consumer's meter.
s s s s s s s
Why might a water company need to shut water off to a particular consumer? - CORRECT ANSWER -
s s s s s s s s s s s s s s s s s
Because of a request to connect or disconnect, for repairs, or as a result of non payment.
s s s s s s s s s s s s s s s s s
Two most common types of Shut-Off Valves - CORRECT ANSWER -Curb stop & Angle stop.
s s s s s s s s s s s s s s
Meters - CORRECT ANSWER -Devices used to read consumer usage.
s s s s s s s s s
Where does a water company's property end - CORRECT ANSWER -At the consumer's meter.
s s s s s s s s s s s s s
Most common type of residential water meter and why? - CORRECT ANSWER -
s s s s s s s s s s s s
Positive displacement meters, because they accurately measure all water that flows through them.
s s s s s s s s s s s s
Three types of water systems - CORRECT ANSWER -Arterial loop, Grid, and Tree.
s s s s s s s s s s s s
Minimum acceptable PSI with a system - CORRECT ANSWER -20 PSI
s s s s s s s s s s
, Normal acceptable range of PSI within a system - CORRECT ANSWER -35 to 65 PSI
s s s s s s s s s s s s s s
When must a pressure regulator be installed on a consumer's service line? - CORRECT ANSWER - GREATER
s s s s s s s s s s s s s s s s
than 80 PSI.
s s s
What is the highest acceptable PSI within a system, before a pressure regulator needs to be installed? -
s s s s s s s s s s s s s s s s s
CORRECT ANSWER -80 PSI
s s s s
Why are higher pressures generally not desired within a system? - CORRECT ANSWER - It
s s s s s s s s s s s s s s
can damage plumbing fixtures.
s s s s
Dynamic Pressure - CORRECT ANSWER -The pressure within a system when water is moving.
s s s s s s s s s s s s s
Six types of pipe found in a water distribution system - CORRECT ANSWER -
s s s s s s s s s s s s s
Ductile Iron, Concrete, Steel, Asbestos Cement, Plastic and Gray Cast Iron.
s s s s s s s s s s s
C-Value - CORRECT ANSWER -The measure of interior smoothness within a pipe.
s s s s s s s s s s s
What does a 140+ C-Value mean? - CORRECT ANSWER - Very
s s s s s s s s s s
smooth interior surface of a pipe (Plastic, AC, Concrete)
s s s s s s s s s
What does a <100 C-Value mean? - CORRECT ANSWER -
s s s s s s s s s
Very bad interior surface of a pipe (Tuburculated old cast iron)
s s s s s s s s s s
What is a Pnetrometer? - CORRECT ANSWER -A tool for measuring the compressive strength of soil.
s s s s s s s s s s s s s s s
What is a Competent Person? - CORRECT ANSWER -
s s s s s s s s
An individual with excavation knowledge and training who is in charge of an excavation job, and who ha s
s s s s s s s s s s s s s s s s s s
the power to start work in the event of a hazard
s s s s s s s s s s s
When is shoring generally required? - CORRECT ANSWER -
s s s s s s s s
When a trench is 5' or more in depth, or hazardous soil conditions exist.
s s s s s s s s s s s s s
(CALIFORNIA) QUESTIONS WITH CORRECT
s s s s
ANSWERS 2025 s s
Three sources of supply -RCORRECT ANSWER -
s s s s s s
Surface water treatment plants, Import/Purchased water, and Wells.
s s s s s s s
Transmission Main - CORRECT ANSWER - s s s s s
ARvery large main designed to move water from one part of the system to another.
s s s s s s s s s s s s s s
Shut-Off Valve - CORRECT ANSWER - s s s s s
A type of valve the water company uses when they need to turn water off to a particular consumer.
s s s s s s s s s s s s s s s s s s
Where is a Shut-Off Valve typically located? - CORRECT ANSWER -
s s s s s s s s s s
Usually found connected to a consumer's meter.
s s s s s s s
Why might a water company need to shut water off to a particular consumer? - CORRECT ANSWER -
s s s s s s s s s s s s s s s s s
Because of a request to connect or disconnect, for repairs, or as a result of non payment.
s s s s s s s s s s s s s s s s s
Two most common types of Shut-Off Valves - CORRECT ANSWER -Curb stop & Angle stop.
s s s s s s s s s s s s s s
Meters - CORRECT ANSWER -Devices used to read consumer usage.
s s s s s s s s s
Where does a water company's property end - CORRECT ANSWER -At the consumer's meter.
s s s s s s s s s s s s s
Most common type of residential water meter and why? - CORRECT ANSWER -
s s s s s s s s s s s s
Positive displacement meters, because they accurately measure all water that flows through them.
s s s s s s s s s s s s
Three types of water systems - CORRECT ANSWER -Arterial loop, Grid, and Tree.
s s s s s s s s s s s s
Minimum acceptable PSI with a system - CORRECT ANSWER -20 PSI
s s s s s s s s s s
, Normal acceptable range of PSI within a system - CORRECT ANSWER -35 to 65 PSI
s s s s s s s s s s s s s s
When must a pressure regulator be installed on a consumer's service line? - CORRECT ANSWER - GREATER
s s s s s s s s s s s s s s s s
than 80 PSI.
s s s
What is the highest acceptable PSI within a system, before a pressure regulator needs to be installed? -
s s s s s s s s s s s s s s s s s
CORRECT ANSWER -80 PSI
s s s s
Why are higher pressures generally not desired within a system? - CORRECT ANSWER - It
s s s s s s s s s s s s s s
can damage plumbing fixtures.
s s s s
Dynamic Pressure - CORRECT ANSWER -The pressure within a system when water is moving.
s s s s s s s s s s s s s
Six types of pipe found in a water distribution system - CORRECT ANSWER -
s s s s s s s s s s s s s
Ductile Iron, Concrete, Steel, Asbestos Cement, Plastic and Gray Cast Iron.
s s s s s s s s s s s
C-Value - CORRECT ANSWER -The measure of interior smoothness within a pipe.
s s s s s s s s s s s
What does a 140+ C-Value mean? - CORRECT ANSWER - Very
s s s s s s s s s s
smooth interior surface of a pipe (Plastic, AC, Concrete)
s s s s s s s s s
What does a <100 C-Value mean? - CORRECT ANSWER -
s s s s s s s s s
Very bad interior surface of a pipe (Tuburculated old cast iron)
s s s s s s s s s s
What is a Pnetrometer? - CORRECT ANSWER -A tool for measuring the compressive strength of soil.
s s s s s s s s s s s s s s s
What is a Competent Person? - CORRECT ANSWER -
s s s s s s s s
An individual with excavation knowledge and training who is in charge of an excavation job, and who ha s
s s s s s s s s s s s s s s s s s s
the power to start work in the event of a hazard
s s s s s s s s s s s
When is shoring generally required? - CORRECT ANSWER -
s s s s s s s s
When a trench is 5' or more in depth, or hazardous soil conditions exist.
s s s s s s s s s s s s s
