1|Page
FLORIDA STATE FIREFIGHTER ACTUAL
EXAM PREP 2026 200 QUESTIONS AND
CORRECT DETAILED ANSWERS ALREADY A
GRADED WITH EXPERT
FEEDBACK|CURRENTLY TESTING |NEW AND
REVISED
What type of extrication method is used to stabilize a vehicle that is
upside down or lying on its side?
A) lifting jack system
B) buttress tension system
C) adjustable struts system
D) pneumatic lifting bag system - answer- b) buttress tension system
What initial action is the next priority after stabilizing the scene?
A) stabilize the victim
B) size-up the situation
C) establish scene security
D) communicate information - answer- a) stabilize the victim
What type of structural collapse occurs when the floor and/or roof
assemblies on both sides of a load-bearing wall collapse, allowing a
good chance of victim survival?
A) a frame
,2|Page
B) pancake
C) v-shaped
D) cantilever - answer- a) a frame
In the oath method of signaling on a search line, two tugs represents:
A) o - ok
B) h - help
C) a - advance
D) t - take-up slack - answer- c) a - advance
Which of the following is an example of a push /pull tool?
A) hux bar
B) pike pole
C) drywall saw
D) battering ram - answer- b) pike pole
Cutting edges on axes should be inspected for:
A) wetness or swelling
B) rust, tarnish, or dirt
C) chips, cracks, or spurs
D) cracks, blisters, or splinters - answer- c) chips, cracks, or spurs
,3|Page
What should a firefighter do before stepping off a ladder, parapet wall,
or other place of safety onto the roof of a burning building, especially if
the roof surface is obscured by smoke or darkness?
A) ensure the safety of all personnel who are assisting
B) direct a fire stream into an existing vertical exhaust opening
C) sound the roof for structural integrity by striking with an axe
D) direct a fire stream into an existing horizontal exhaust opening -
answer- c) sound the roof for structural integrity by striking with an axe
What type of hose is designed for drafting water from static water
supplies or connecting to a fire hydrant?
A) soft sleeve hose
B) hard-suction hose
C) double-jacket hose
D) suction supply hose - answer- b) hard-suction hose
What type of fire hose damage can weaken the jacket which can lead to
ruptures under pressure?
A) organic damage
B) thermal damage
C) chemical damage
D) mechanical damage - answer- a) organic damage
Which of the following equipment is necessary for service testing?
A) hose clamps
, 4|Page
B) chaffing blocks
C) a hose-washing machine
D) nozzles with shutoff valves - answer- d) nozzles with shutoff valves
The test site for service testing should be:
A) on a gravel area
B) on a slight grade
C) as close to the station as possible
D) large enough to lay out hose with multiple kinks - answer- b) on a
slight grade
Which of the following procedures should be followed when service
testing fire hose?
A) close all valves as quickly as possible
B) pick up all large-diameter hose before charging it
C) stand away from the discharge valve connection when charging hose
D) connect the hose to discharges on the pump panel side of the
apparatus - answer- c) stand away from the discharge valve connection
when charging hose
Which of the following statements about class a foam concentrates is
most accurate?
A) class a foam is used for structural fires, but is not suitable for
wildland fires
FLORIDA STATE FIREFIGHTER ACTUAL
EXAM PREP 2026 200 QUESTIONS AND
CORRECT DETAILED ANSWERS ALREADY A
GRADED WITH EXPERT
FEEDBACK|CURRENTLY TESTING |NEW AND
REVISED
What type of extrication method is used to stabilize a vehicle that is
upside down or lying on its side?
A) lifting jack system
B) buttress tension system
C) adjustable struts system
D) pneumatic lifting bag system - answer- b) buttress tension system
What initial action is the next priority after stabilizing the scene?
A) stabilize the victim
B) size-up the situation
C) establish scene security
D) communicate information - answer- a) stabilize the victim
What type of structural collapse occurs when the floor and/or roof
assemblies on both sides of a load-bearing wall collapse, allowing a
good chance of victim survival?
A) a frame
,2|Page
B) pancake
C) v-shaped
D) cantilever - answer- a) a frame
In the oath method of signaling on a search line, two tugs represents:
A) o - ok
B) h - help
C) a - advance
D) t - take-up slack - answer- c) a - advance
Which of the following is an example of a push /pull tool?
A) hux bar
B) pike pole
C) drywall saw
D) battering ram - answer- b) pike pole
Cutting edges on axes should be inspected for:
A) wetness or swelling
B) rust, tarnish, or dirt
C) chips, cracks, or spurs
D) cracks, blisters, or splinters - answer- c) chips, cracks, or spurs
,3|Page
What should a firefighter do before stepping off a ladder, parapet wall,
or other place of safety onto the roof of a burning building, especially if
the roof surface is obscured by smoke or darkness?
A) ensure the safety of all personnel who are assisting
B) direct a fire stream into an existing vertical exhaust opening
C) sound the roof for structural integrity by striking with an axe
D) direct a fire stream into an existing horizontal exhaust opening -
answer- c) sound the roof for structural integrity by striking with an axe
What type of hose is designed for drafting water from static water
supplies or connecting to a fire hydrant?
A) soft sleeve hose
B) hard-suction hose
C) double-jacket hose
D) suction supply hose - answer- b) hard-suction hose
What type of fire hose damage can weaken the jacket which can lead to
ruptures under pressure?
A) organic damage
B) thermal damage
C) chemical damage
D) mechanical damage - answer- a) organic damage
Which of the following equipment is necessary for service testing?
A) hose clamps
, 4|Page
B) chaffing blocks
C) a hose-washing machine
D) nozzles with shutoff valves - answer- d) nozzles with shutoff valves
The test site for service testing should be:
A) on a gravel area
B) on a slight grade
C) as close to the station as possible
D) large enough to lay out hose with multiple kinks - answer- b) on a
slight grade
Which of the following procedures should be followed when service
testing fire hose?
A) close all valves as quickly as possible
B) pick up all large-diameter hose before charging it
C) stand away from the discharge valve connection when charging hose
D) connect the hose to discharges on the pump panel side of the
apparatus - answer- c) stand away from the discharge valve connection
when charging hose
Which of the following statements about class a foam concentrates is
most accurate?
A) class a foam is used for structural fires, but is not suitable for
wildland fires
