NEVADA NV C-3B FINISH CARPENTRY
PRACTICE EXAM 2026 COMPREHENSIVE
PREPARATION GUIDE
◉ An apprentice program traditionally requires 8,000 hours of
training, which is equivalent to. Answer: Four Years
◉ A training program in which a craft is learned from those who
have mastered the craft and focuses on learning by doing is called.
Answer: Apprenticeship
◉ In a traditional carpentry apprenticeship program, the total
number of OJL hours required is. Answer: 8,000
◉ A journeyman carpenter employed by a small form is more likely
to. Answer: Perform a variety of tasks
◉ Craftworkers who perform such tasks as building stairs, installing
trim, and hanging doors are considered. Answer: Finish Carpenters
◉ Which of these tasks falls into the category of rough carpentry.
Answer: Framing a house
,◉ Once a responsibility has been delegated to a carpenter, that
carpenter should. Answer: Continue to perform the duties without
furthers direction
◉ Which of these is a true statement regarding availabilty for work.
Answer: Unless you are ill or have a family emergency, you should be
on the job by the specified time
◉ If a carpenter is frequently tardy that carpenter is. Answer: Often
arriving late for work
◉ In its history, SkillsUSA has served more than. Answer: 10.5
million members
◉ The national organization serving teachers and students
preparing for careers in technical, skilled, and service occupations is.
Answer: SkillsUSA
◉ In SkillsUSA, the activities and projects that your chapter is going
to undertake during the school year is referred to as the. Answer:
Program of Work
◉ A required topic in the OSHA-10 program is. Answer: Focus Four
Hazards
, ◉ If you see something unsafe on the job site, you should. Answer:
Report it immediately to your supervisor
◉ Wood fibers are bound together by a substance called. Answer:
Lignin
◉ Which of the following is not and advantage of wood as a building
material. Answer: It is immune to damage from insects and weather
◉ The term quarter-sawed means. Answer: The lumber is cut with
the growth rings at an angle greater than 45 degrees
◉ Light framing lumber is classified as. Answer: Dimension lumber
◉ Which of these core materials is most common in softwood
plywood. Answer: Veneer
◉ Which grade of hardboard can be used in exteior applications.
Answer: Tempered
◉ An engineered wood product that consists of wood particles
combined with a binder and is formed into panels under heat and
pressure is classified as. Answer: Particleboard
PRACTICE EXAM 2026 COMPREHENSIVE
PREPARATION GUIDE
◉ An apprentice program traditionally requires 8,000 hours of
training, which is equivalent to. Answer: Four Years
◉ A training program in which a craft is learned from those who
have mastered the craft and focuses on learning by doing is called.
Answer: Apprenticeship
◉ In a traditional carpentry apprenticeship program, the total
number of OJL hours required is. Answer: 8,000
◉ A journeyman carpenter employed by a small form is more likely
to. Answer: Perform a variety of tasks
◉ Craftworkers who perform such tasks as building stairs, installing
trim, and hanging doors are considered. Answer: Finish Carpenters
◉ Which of these tasks falls into the category of rough carpentry.
Answer: Framing a house
,◉ Once a responsibility has been delegated to a carpenter, that
carpenter should. Answer: Continue to perform the duties without
furthers direction
◉ Which of these is a true statement regarding availabilty for work.
Answer: Unless you are ill or have a family emergency, you should be
on the job by the specified time
◉ If a carpenter is frequently tardy that carpenter is. Answer: Often
arriving late for work
◉ In its history, SkillsUSA has served more than. Answer: 10.5
million members
◉ The national organization serving teachers and students
preparing for careers in technical, skilled, and service occupations is.
Answer: SkillsUSA
◉ In SkillsUSA, the activities and projects that your chapter is going
to undertake during the school year is referred to as the. Answer:
Program of Work
◉ A required topic in the OSHA-10 program is. Answer: Focus Four
Hazards
, ◉ If you see something unsafe on the job site, you should. Answer:
Report it immediately to your supervisor
◉ Wood fibers are bound together by a substance called. Answer:
Lignin
◉ Which of the following is not and advantage of wood as a building
material. Answer: It is immune to damage from insects and weather
◉ The term quarter-sawed means. Answer: The lumber is cut with
the growth rings at an angle greater than 45 degrees
◉ Light framing lumber is classified as. Answer: Dimension lumber
◉ Which of these core materials is most common in softwood
plywood. Answer: Veneer
◉ Which grade of hardboard can be used in exteior applications.
Answer: Tempered
◉ An engineered wood product that consists of wood particles
combined with a binder and is formed into panels under heat and
pressure is classified as. Answer: Particleboard
