NFPA 1123 – NUMBERS |QUESTIONS WITH VERIFIED
ACCURATE ASWERS | LATEST UPDATED
The label shall be at least _______ inches, unless the size of the shell is too small, in
which case the label shall be permitted to be reduced to a size no smaller than
necessary. - Answers -9
The fuse for manually fired individual aerial shells that use a quick match fuse to ignite
the lift charge shall be long enough to allow not less than _______ inches of fuse to
protrude after the shell has been inserted into the mortar. - Answers -6
The time delay from ignition of the tip of a manually fired aerial shell's fuse and the lifting
of the aerial shell shall be designed to be not less than 2 seconds and not more than
____ seconds. - Answers -6
Single break aerial salute shells shall be limited to a maximum size of ____ inches in
diameter and length and must be shot from a _non-metal mortar. - Answers -5
Mortars used for salutes more than ____ inches in diameter and length shall be
individually supported and separated from other mortars by 10 times the inside diameter
of the mortar. - Answers -3
Salutes more than ____ inches in diameter or length shall be permitted to be used only
by licensed operators or designated agents of licensed companies or displays under the
direct control of a licensed professional fireworks display company. - Answers -3
Ground salutes shall not exceed ____ inches in diameter and length. - Answers -3
Preparation area(s) for display fireworks shall be secured from public access by at least
____ feet. - Answers -100
At the display site, assembly or repair of fireworks shall not be performed within ____
feet of fireworks storage. - Answers -50
During the performance of an outdoor fireworks display, ready boxes shall be located at
a distance of at least ____ feet upwind from the mortar placements. - Answers -30
Any type of mortar 6 in. in diameter or less shall be permitted to be reloaded and fired
up to ____ times during a performance, unless steel mortars are being used in which
require no limit. - Answers -7
Buried mortars shall be buried to a depth of at least _____ of their length, either in the
ground or in above ground troughs or drums. - Answers -2/3
ACCURATE ASWERS | LATEST UPDATED
The label shall be at least _______ inches, unless the size of the shell is too small, in
which case the label shall be permitted to be reduced to a size no smaller than
necessary. - Answers -9
The fuse for manually fired individual aerial shells that use a quick match fuse to ignite
the lift charge shall be long enough to allow not less than _______ inches of fuse to
protrude after the shell has been inserted into the mortar. - Answers -6
The time delay from ignition of the tip of a manually fired aerial shell's fuse and the lifting
of the aerial shell shall be designed to be not less than 2 seconds and not more than
____ seconds. - Answers -6
Single break aerial salute shells shall be limited to a maximum size of ____ inches in
diameter and length and must be shot from a _non-metal mortar. - Answers -5
Mortars used for salutes more than ____ inches in diameter and length shall be
individually supported and separated from other mortars by 10 times the inside diameter
of the mortar. - Answers -3
Salutes more than ____ inches in diameter or length shall be permitted to be used only
by licensed operators or designated agents of licensed companies or displays under the
direct control of a licensed professional fireworks display company. - Answers -3
Ground salutes shall not exceed ____ inches in diameter and length. - Answers -3
Preparation area(s) for display fireworks shall be secured from public access by at least
____ feet. - Answers -100
At the display site, assembly or repair of fireworks shall not be performed within ____
feet of fireworks storage. - Answers -50
During the performance of an outdoor fireworks display, ready boxes shall be located at
a distance of at least ____ feet upwind from the mortar placements. - Answers -30
Any type of mortar 6 in. in diameter or less shall be permitted to be reloaded and fired
up to ____ times during a performance, unless steel mortars are being used in which
require no limit. - Answers -7
Buried mortars shall be buried to a depth of at least _____ of their length, either in the
ground or in above ground troughs or drums. - Answers -2/3
