CCNA 200-301 QUESTIONS ANSWERS
WITH VERIFIED SOLUTIONS 100%
CORRECT UPDATE 2026
What is NVRAM? - CORRECT ANSWES -- Non-volatile RAM, stores the initial or
startup configuration file that is used when the switch is first powered on and when the
switch is reloaded
What is the Content-Addressable Memory (CAM) table? - CORRECT ANSWES -- The
MAC Address Table
What are the default settings of a Cisco Catalyst Switch? - CORRECT ANSWES -- -
Interfaces are enabled by default
- All interfaces are assigned VLAN 1
- 10/100 and 10/100/1000 interfaces use autonegotiation
- MAC learning, forwarding, and flooding logic works
- STP is enabled
What command is used to show the dynamically learned MAC addresses? - CORRECT
ANSWES -- show mac address-table dynamic
What command removes the VLAN configuration details - CORRECT ANSWES --
delete vlan.dat
What is the default aging timer for a MAC Address table? - CORRECT ANSWES -- 300
seconds
What does a switch do when the MAC Address table is full? - CORRECT ANSWES --
Times out the oldest record in the table
What does the login command do on a line interface? - CORRECT ANSWES -- Tells
IOS to enable the user of a single shared password with no username on this line, so
that the switch asks the user for the password
How do you create local users & associated them to lines? - CORRECT ANSWES --
'username <name> password <pass>'
'line <line> #'
'login local'
What commands are necessary for ssh? - CORRECT ANSWES -- 'hostname <name>'
'ip domain-name <name>'
crypto key generate rsa'
, What can you add to 'crypto key generate rsa' to set the modulus value? - CORRECT
ANSWES -- 'modulus #'
What command would you use to only allow ssh? - CORRECT ANSWES -- 'transport
input ssh'
What modulus value should be at least used with sshv2? - CORRECT ANSWES -- 768-
bit key
How do you override default settings of sshv1 support? - CORRECT ANSWES -- 'ip ssh
version 2'
What is the SVI? - CORRECT ANSWES -- Switch Virtual Interface - VLAN interface that
acts like the switch's own NIC
How do you give an SVI DHCP? - CORRECT ANSWES -- 'int vlan 1'
'ip address dhcp'
How do you set the history size of only the current session? - CORRECT ANSWES --
'terminal history size #'
What is NVRAM? - CORRECT ANSWES -- Non-volatile RAM, stores the initial or
startup configuration file that is used when the switch is first powered on and when the
switch is reloaded
What is the Content-Addressable Memory (CAM) table? - CORRECT ANSWES -- The
MAC Address Table
What are the default settings of a Cisco Catalyst Switch? - CORRECT ANSWES -- -
Interfaces are enabled by default
- All interfaces are assigned VLAN 1
- 10/100 and 10/100/1000 interfaces use autonegotiation
- MAC learning, forwarding, and flooding logic works
- STP is enabled
What command is used to show the dynamically learned MAC addresses? - CORRECT
ANSWES -- show mac address-table dynamic
What command removes the VLAN configuration details - CORRECT ANSWES --
delete vlan.dat
What is the default aging timer for a MAC Address table? - CORRECT ANSWES -- 300
seconds
WITH VERIFIED SOLUTIONS 100%
CORRECT UPDATE 2026
What is NVRAM? - CORRECT ANSWES -- Non-volatile RAM, stores the initial or
startup configuration file that is used when the switch is first powered on and when the
switch is reloaded
What is the Content-Addressable Memory (CAM) table? - CORRECT ANSWES -- The
MAC Address Table
What are the default settings of a Cisco Catalyst Switch? - CORRECT ANSWES -- -
Interfaces are enabled by default
- All interfaces are assigned VLAN 1
- 10/100 and 10/100/1000 interfaces use autonegotiation
- MAC learning, forwarding, and flooding logic works
- STP is enabled
What command is used to show the dynamically learned MAC addresses? - CORRECT
ANSWES -- show mac address-table dynamic
What command removes the VLAN configuration details - CORRECT ANSWES --
delete vlan.dat
What is the default aging timer for a MAC Address table? - CORRECT ANSWES -- 300
seconds
What does a switch do when the MAC Address table is full? - CORRECT ANSWES --
Times out the oldest record in the table
What does the login command do on a line interface? - CORRECT ANSWES -- Tells
IOS to enable the user of a single shared password with no username on this line, so
that the switch asks the user for the password
How do you create local users & associated them to lines? - CORRECT ANSWES --
'username <name> password <pass>'
'line <line> #'
'login local'
What commands are necessary for ssh? - CORRECT ANSWES -- 'hostname <name>'
'ip domain-name <name>'
crypto key generate rsa'
, What can you add to 'crypto key generate rsa' to set the modulus value? - CORRECT
ANSWES -- 'modulus #'
What command would you use to only allow ssh? - CORRECT ANSWES -- 'transport
input ssh'
What modulus value should be at least used with sshv2? - CORRECT ANSWES -- 768-
bit key
How do you override default settings of sshv1 support? - CORRECT ANSWES -- 'ip ssh
version 2'
What is the SVI? - CORRECT ANSWES -- Switch Virtual Interface - VLAN interface that
acts like the switch's own NIC
How do you give an SVI DHCP? - CORRECT ANSWES -- 'int vlan 1'
'ip address dhcp'
How do you set the history size of only the current session? - CORRECT ANSWES --
'terminal history size #'
What is NVRAM? - CORRECT ANSWES -- Non-volatile RAM, stores the initial or
startup configuration file that is used when the switch is first powered on and when the
switch is reloaded
What is the Content-Addressable Memory (CAM) table? - CORRECT ANSWES -- The
MAC Address Table
What are the default settings of a Cisco Catalyst Switch? - CORRECT ANSWES -- -
Interfaces are enabled by default
- All interfaces are assigned VLAN 1
- 10/100 and 10/100/1000 interfaces use autonegotiation
- MAC learning, forwarding, and flooding logic works
- STP is enabled
What command is used to show the dynamically learned MAC addresses? - CORRECT
ANSWES -- show mac address-table dynamic
What command removes the VLAN configuration details - CORRECT ANSWES --
delete vlan.dat
What is the default aging timer for a MAC Address table? - CORRECT ANSWES -- 300
seconds