PTC CREO SIMULATE EXAM 1 CHECK YOUR KNOWLEDGE
MODULE 1-9 (LATEST UPDATE) REAL QUESTIONS AND
VERIFIED ANSWERS |100% CORRECT | ALREADY GRADED
A
Creo Simulate Structure Ans✓✓✓_______________ enables the user to
perform Static, Modal, Buckling, Contact, Prestress Static, and Prestress
Modal analyses.
all of the above. Ans✓✓✓Using the Home tab, you can create
An analysis will always fail if the loads and constraints are applied
before the properties are defined. Ans✓✓✓Which statement regarding
the Simulate Structure process is FALSE?
False Ans✓✓✓True or False? Simulate can only analyze parts, not
assemblies.
Plane symmetry Ans✓✓✓Which model type is NOT an option in
Simulate?
Simulate Structure Ans✓✓✓_______________ enables the user to
perform Static, Modal, Buckling, Contact, Prestress Static, Prestress
Modal, and Vibration analyses.
, False Ans✓✓✓True or False? The h- and p-versions of the finite
element method are different ways of adding degrees of freedom to the
model.
False Ans✓✓✓True or False? The Distortion Energy theory is more
conservative than the Maximum Shear Stress theory.
the nodes. Ans✓✓✓Traditional finite element solvers calculate
displacements at
True Ans✓✓✓True or False? The strain energy of the total model and
comparative stresses may be used as convergence criteria in Simulate.
It uses the P element version of the Finite Element Method and enhances
its own accuracy by automatically adjusting the degrees of the
polynomial shape functions until convergence is achieved.
Ans✓✓✓Which statement best describes the analysis method used by
Creo Simulate Structure?
True Ans✓✓✓True or False? The Inheritance Feature is the feature to
use if you want to keep the simulation model independent from the CAD
geometry.
True Ans✓✓✓True or False? The Remove Feature can be combined
with the Inheritance Feature.
MODULE 1-9 (LATEST UPDATE) REAL QUESTIONS AND
VERIFIED ANSWERS |100% CORRECT | ALREADY GRADED
A
Creo Simulate Structure Ans✓✓✓_______________ enables the user to
perform Static, Modal, Buckling, Contact, Prestress Static, and Prestress
Modal analyses.
all of the above. Ans✓✓✓Using the Home tab, you can create
An analysis will always fail if the loads and constraints are applied
before the properties are defined. Ans✓✓✓Which statement regarding
the Simulate Structure process is FALSE?
False Ans✓✓✓True or False? Simulate can only analyze parts, not
assemblies.
Plane symmetry Ans✓✓✓Which model type is NOT an option in
Simulate?
Simulate Structure Ans✓✓✓_______________ enables the user to
perform Static, Modal, Buckling, Contact, Prestress Static, Prestress
Modal, and Vibration analyses.
, False Ans✓✓✓True or False? The h- and p-versions of the finite
element method are different ways of adding degrees of freedom to the
model.
False Ans✓✓✓True or False? The Distortion Energy theory is more
conservative than the Maximum Shear Stress theory.
the nodes. Ans✓✓✓Traditional finite element solvers calculate
displacements at
True Ans✓✓✓True or False? The strain energy of the total model and
comparative stresses may be used as convergence criteria in Simulate.
It uses the P element version of the Finite Element Method and enhances
its own accuracy by automatically adjusting the degrees of the
polynomial shape functions until convergence is achieved.
Ans✓✓✓Which statement best describes the analysis method used by
Creo Simulate Structure?
True Ans✓✓✓True or False? The Inheritance Feature is the feature to
use if you want to keep the simulation model independent from the CAD
geometry.
True Ans✓✓✓True or False? The Remove Feature can be combined
with the Inheritance Feature.
