100% CORRECT WELL DETAILED ANSWERS|LATEST
CORRECT = 100
100
INCORRECT=0
STUDY MATERIALS.......DESIGNED TO HELP YOU SUCCEED
SPOTLIGHT 1
1
, AND 100% CORRECT WELL DETAILED ANSWERS|LATEST
UPDATE!!!!!!2026|GUARANTEED PASS|GRADED
A listed ____ shall be installed in or on all emergency systems switchboards and
panelboards.
A. Ground-fault circuit interrupter (GFCI)
B. Surge-protective device (SPD)
C. Arc-fault circuit interrupter (AFCI)
D. Leakage-current detector-interrupter (LCDI) - ANSWER B. Surge-protective device
(SPD)
pg. 607
In general, where a cablebus system is rated 95 amperes, the MAXIMUM allowable rating of
the overcurrent device that may be used to protect the cablebus conductors is ____.
A. 80 amperes
B. 90 amperes
C. 95 amperes
D. 100 amperes - ANSWER D. 100 amperes
pg. 227, 98, 100
A feeder tap less than 25 feet in length is note required to have overcurrent protection if the
ampacity of the tap conductors is NOT less than ____ of the rating of the overcurrent device
protecting the feeder conductors.
2
CORRECT = 100
100
INCORRECT=0
STUDY MATERIALS.......DESIGNED TO HELP YOU SUCCEED
SPOTLIGHT 1
1
, AND 100% CORRECT WELL DETAILED ANSWERS|LATEST
UPDATE!!!!!!2026|GUARANTEED PASS|GRADED
A listed ____ shall be installed in or on all emergency systems switchboards and
panelboards.
A. Ground-fault circuit interrupter (GFCI)
B. Surge-protective device (SPD)
C. Arc-fault circuit interrupter (AFCI)
D. Leakage-current detector-interrupter (LCDI) - ANSWER B. Surge-protective device
(SPD)
pg. 607
In general, where a cablebus system is rated 95 amperes, the MAXIMUM allowable rating of
the overcurrent device that may be used to protect the cablebus conductors is ____.
A. 80 amperes
B. 90 amperes
C. 95 amperes
D. 100 amperes - ANSWER D. 100 amperes
pg. 227, 98, 100
A feeder tap less than 25 feet in length is note required to have overcurrent protection if the
ampacity of the tap conductors is NOT less than ____ of the rating of the overcurrent device
protecting the feeder conductors.
2
