New Jersey Master Electrician Examination
Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of the New Jersey Uniform
Construction Code (UCC) as it applies to electrical work?
A. To regulate utility-owned electrical systems
B. To establish minimum standards for safety and construction
C. To replace the National Electrical Code
D. To govern only residential electrical installations
Correct Answer: B
The UCC establishes minimum safety and construction standards
statewide and incorporates the NEC by reference.
2. In New Jersey, who has the authority to issue electrical permits for
most projects?
A. The Department of Labor
B. The utility company
C. The local enforcing agency
D. The electrical contractor
Correct Answer: C
Local enforcing agencies administer permits and inspections under the
UCC.
, 3. A Master Electrician in New Jersey is legally responsible for:
A. Only supervising apprentices
B. Design, installation, and compliance of electrical systems
C. Utility-side wiring
D. Low-voltage work only
Correct Answer: B
The Master Electrician bears full responsibility for code compliance and
proper installation.
4. Which NEC Article governs requirements for grounding and
bonding?
A. Article 100
B. Article 210
C. Article 250
D. Article 300
Correct Answer: C
Article 250 addresses grounding and bonding requirements.
5. What is the maximum allowable voltage to ground for systems
classified as low voltage under the NEC?
A. 50 volts
B. 120 volts
C. 150 volts
D. 600 volts
Correct Answer: A
Low voltage systems are defined as 50 volts or less.
6. Which conductor is permitted to be bare under the NEC?
A. Grounded conductor
, B. Ungrounded conductor
C. Equipment grounding conductor
D. Neutral conductor in all cases
Correct Answer: C
Equipment grounding conductors may be bare or insulated.
7. What is the minimum depth of cover for rigid metal conduit under
a residential driveway?
A. 6 inches
B. 12 inches
C. 18 inches
D. 24 inches
Correct Answer: C
Rigid metal conduit generally requires 18 inches of cover under
driveways.
8. What NEC Article covers branch circuits?
A. Article 210
B. Article 215
C. Article 220
D. Article 230
Correct Answer: A
Article 210 addresses branch circuits.
9. In dwelling units, general-purpose receptacle outlets must be
installed so that no point along the floor line is more than:
A. 6 feet from a receptacle
B. 8 feet from a receptacle
Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of the New Jersey Uniform
Construction Code (UCC) as it applies to electrical work?
A. To regulate utility-owned electrical systems
B. To establish minimum standards for safety and construction
C. To replace the National Electrical Code
D. To govern only residential electrical installations
Correct Answer: B
The UCC establishes minimum safety and construction standards
statewide and incorporates the NEC by reference.
2. In New Jersey, who has the authority to issue electrical permits for
most projects?
A. The Department of Labor
B. The utility company
C. The local enforcing agency
D. The electrical contractor
Correct Answer: C
Local enforcing agencies administer permits and inspections under the
UCC.
, 3. A Master Electrician in New Jersey is legally responsible for:
A. Only supervising apprentices
B. Design, installation, and compliance of electrical systems
C. Utility-side wiring
D. Low-voltage work only
Correct Answer: B
The Master Electrician bears full responsibility for code compliance and
proper installation.
4. Which NEC Article governs requirements for grounding and
bonding?
A. Article 100
B. Article 210
C. Article 250
D. Article 300
Correct Answer: C
Article 250 addresses grounding and bonding requirements.
5. What is the maximum allowable voltage to ground for systems
classified as low voltage under the NEC?
A. 50 volts
B. 120 volts
C. 150 volts
D. 600 volts
Correct Answer: A
Low voltage systems are defined as 50 volts or less.
6. Which conductor is permitted to be bare under the NEC?
A. Grounded conductor
, B. Ungrounded conductor
C. Equipment grounding conductor
D. Neutral conductor in all cases
Correct Answer: C
Equipment grounding conductors may be bare or insulated.
7. What is the minimum depth of cover for rigid metal conduit under
a residential driveway?
A. 6 inches
B. 12 inches
C. 18 inches
D. 24 inches
Correct Answer: C
Rigid metal conduit generally requires 18 inches of cover under
driveways.
8. What NEC Article covers branch circuits?
A. Article 210
B. Article 215
C. Article 220
D. Article 230
Correct Answer: A
Article 210 addresses branch circuits.
9. In dwelling units, general-purpose receptacle outlets must be
installed so that no point along the floor line is more than:
A. 6 feet from a receptacle
B. 8 feet from a receptacle
