NCCER study guide Module 1 Basic Safety Questions and Answers
Companies with strong safety cultures usually point where the ladder touches the platform or
have lower _ . - -turnover roof by at least _ _ _ . - -3 feet (91 cm)
Safety is a learned behavior and attitude. T/F - When performing overhead work on scaffolding,
-TRUE _ , _ _ , or _ must be applied as protective
measures to prevent objects from falling and
striking a person below. - -Toeboards,
Poor lighting, excessive noise, inadequate debris nets, canopies
guards for moving parts are examples of _ _. -
-unsafe conditions
When stacking materials such as bricks or
blocks, do not stack materials beyond a _ _ _ _ _.
The activity that consists of breaking a job into its - -4:1 height-to-base ratio
component task and then analyzing each step for
potential hazards is called _ _ _ . - -job
safety analysis Benching systems are prohibited in _ _ _ . -
-Type C Soils
The measure of probability, consequences, and
exposure related to an event is referred to as _ . In the absence of other information, all soil in an
- -Risk excavation should be treated as if is _ _ . -
-Type C
If there is a hole in the floor of a structure, the
preferred method of protecting workers from falls Daily inspection of an excavation must be
is to _ _ _ _ _ _ _ . - -cover the opening performed by a _ _ . - -competent person
and label the cover
One of the most common grounding systems
The D-ring or support point on a safety harness used for protection against accidental electrical
should be placed _ _ _ _ _ _ . - -in the shock is the _ _ _ . - -three-wire-system
middle of the back
The type of permit that must be issued before a
A personal fall arrest system should be inspected permit-required confined space can be accessed
monthly by a _ _ . - -competent person is called _ _ _. - -an entry permit
Lanyards that have no shock-absorbing features A polarized electrical receptacle is used for _ _ _
are used for _ . - -positioning .- -double insulated tools
When placing a ladder against a platform or roof, _ _ _ fire extinguisher would be used on an
the top of the ladder should extend above the electric motor that has overheated and caught
1/2
Companies with strong safety cultures usually point where the ladder touches the platform or
have lower _ . - -turnover roof by at least _ _ _ . - -3 feet (91 cm)
Safety is a learned behavior and attitude. T/F - When performing overhead work on scaffolding,
-TRUE _ , _ _ , or _ must be applied as protective
measures to prevent objects from falling and
striking a person below. - -Toeboards,
Poor lighting, excessive noise, inadequate debris nets, canopies
guards for moving parts are examples of _ _. -
-unsafe conditions
When stacking materials such as bricks or
blocks, do not stack materials beyond a _ _ _ _ _.
The activity that consists of breaking a job into its - -4:1 height-to-base ratio
component task and then analyzing each step for
potential hazards is called _ _ _ . - -job
safety analysis Benching systems are prohibited in _ _ _ . -
-Type C Soils
The measure of probability, consequences, and
exposure related to an event is referred to as _ . In the absence of other information, all soil in an
- -Risk excavation should be treated as if is _ _ . -
-Type C
If there is a hole in the floor of a structure, the
preferred method of protecting workers from falls Daily inspection of an excavation must be
is to _ _ _ _ _ _ _ . - -cover the opening performed by a _ _ . - -competent person
and label the cover
One of the most common grounding systems
The D-ring or support point on a safety harness used for protection against accidental electrical
should be placed _ _ _ _ _ _ . - -in the shock is the _ _ _ . - -three-wire-system
middle of the back
The type of permit that must be issued before a
A personal fall arrest system should be inspected permit-required confined space can be accessed
monthly by a _ _ . - -competent person is called _ _ _. - -an entry permit
Lanyards that have no shock-absorbing features A polarized electrical receptacle is used for _ _ _
are used for _ . - -positioning .- -double insulated tools
When placing a ladder against a platform or roof, _ _ _ fire extinguisher would be used on an
the top of the ladder should extend above the electric motor that has overheated and caught
1/2
