MA 2A Hoisting Exam 2026 Exam
Questions and Correct Answers | New
Update
What is the purpose of the 520:C.M.R.6:00 - 🧠 ANSWER ✔✔To establish
rules and regulations for safety of the public
What regulatory authority governs hoisting machinery - 🧠 ANSWER
✔✔520-C.M.R. 6:00 MGL chapter 146 section 53-54A
What type of system is used when working on de-energized circuit - 🧠
ANSWER ✔✔Lock out tag out
In event of death, department of public safety must how soon - 🧠 ANSWER
✔✔Within 1 hour of incident
, When are reports of injury that required hospitalization or medical treatment
sent to the engineering section of department of public safety - 🧠 ANSWER
✔✔Immediately After the person has been treated
All welding and cutting on hoisting equipment must be done in accordance
with requirements of what - 🧠 ANSWER ✔✔American society of mechanical
engineering (ASME)
What items should be checked on daily inspection - 🧠 ANSWER ✔✔Wire
ropes, bearings, gears, friction clutches, brakes, chain drives and anything
subject to wear
What type of protection should be given to the operator of material handling
and moving equipment - 🧠 ANSWER ✔✔Protection from weather, heat in
winter, safety glasses, hard hat, roll over protective system
What equipment requires hoisting license - 🧠 ANSWER ✔✔Height of lift
exceed 10' or weight of load exceed 500 lbs or the capacity of the bucket is
more than 1/4 cubic yard
What is the minimum absolute limit of approach of power lines when
operating equipment - 🧠 ANSWER ✔✔125,000 volts = 10'
250,000 volts = 15'
Questions and Correct Answers | New
Update
What is the purpose of the 520:C.M.R.6:00 - 🧠 ANSWER ✔✔To establish
rules and regulations for safety of the public
What regulatory authority governs hoisting machinery - 🧠 ANSWER
✔✔520-C.M.R. 6:00 MGL chapter 146 section 53-54A
What type of system is used when working on de-energized circuit - 🧠
ANSWER ✔✔Lock out tag out
In event of death, department of public safety must how soon - 🧠 ANSWER
✔✔Within 1 hour of incident
, When are reports of injury that required hospitalization or medical treatment
sent to the engineering section of department of public safety - 🧠 ANSWER
✔✔Immediately After the person has been treated
All welding and cutting on hoisting equipment must be done in accordance
with requirements of what - 🧠 ANSWER ✔✔American society of mechanical
engineering (ASME)
What items should be checked on daily inspection - 🧠 ANSWER ✔✔Wire
ropes, bearings, gears, friction clutches, brakes, chain drives and anything
subject to wear
What type of protection should be given to the operator of material handling
and moving equipment - 🧠 ANSWER ✔✔Protection from weather, heat in
winter, safety glasses, hard hat, roll over protective system
What equipment requires hoisting license - 🧠 ANSWER ✔✔Height of lift
exceed 10' or weight of load exceed 500 lbs or the capacity of the bucket is
more than 1/4 cubic yard
What is the minimum absolute limit of approach of power lines when
operating equipment - 🧠 ANSWER ✔✔125,000 volts = 10'
250,000 volts = 15'
