OSHA 511 GENERAL INDUSTRY CERTIFICATION
EVALUATION EXAMS 2026 QUESTIONS WITH
ANSWERS GRADED A+
◉ All work related fatalities must be reported within? Answer: 8 hours
◉ All injuries that involve in-patient hospitalization, amputation, eye
loss must be reported within. Answer: 24 hours
◉ What is serious physical harm? Answer: Anything greater than a first
aid situation
◉ What does NIOSH do. Answer: OSHA research group / facility
◉ Employer Responsibility. Answer: Shall furnish to each of his
employees employment and a place of employment which are free from
recognized hazards that are causing or are likely to cause death or
serious physical harm to his employees. Also shall comply with OSHA
◉ OSHA's general duty clause states under "An Act" that it will:.
Answer: assure safe and healthful working conditions for working men
and women
,◉ Horizontal Standard. Answer: A standard which is applied to all
industries or people.
◉ Vertical Standard. Answer: A standard that applies to a particular or
specific group of people or industry.
◉ Incorporation By Reference. Answer: OSHA Directives Compliance
Directives GUIDEBOOK
● Enforcement & Compliance Directives (CPL)
● Letters of Interpretation
● Federal Register
◉ CPL. Answer: Compliance....
◉ Floor Hole. Answer: Opening greater than 1in & less than 12in in any
floor, platform, pavement or yard, through which materials (but not
persons) may fall through (ex: belt hole, pipe opening or slot opening)
◉ Floor Opening. Answer: Opening greater than 12in (note an
OPENING is larger than a HOLE)
◉ Minimum width of fixed industrial stairs. Answer: 28 inches wide
, ◉ OSHA certifies that a citation must be. Answer: ● addressed
● corrections must be completed by abatement date
● OSHA has 180 days to issue the actual citation(s)
◉ Cages or Wells shall be provided on ladders. Answer: greater than 20
feet to a maximum of unbroken length of 30 feet (1910.27)
◉ General Duty Clause. Answer: Every employer shall furnish to his
employee's employment and a place of employment which are free from
recognized hazards that are causing or likely to cause death or serious
physical harm to his employees.
◉ OSHA Inspection Review (priority). Answer: 1) Imminent danger
2) Catastrophies & fatal accidents
3) Employee complaints & referrals
4) Programmed, high level inspections
5) Follow up inspections
◉ Inspection Process must include. Answer: 1) Opening Conference
2) Walk Around
3) Closing Conference
EVALUATION EXAMS 2026 QUESTIONS WITH
ANSWERS GRADED A+
◉ All work related fatalities must be reported within? Answer: 8 hours
◉ All injuries that involve in-patient hospitalization, amputation, eye
loss must be reported within. Answer: 24 hours
◉ What is serious physical harm? Answer: Anything greater than a first
aid situation
◉ What does NIOSH do. Answer: OSHA research group / facility
◉ Employer Responsibility. Answer: Shall furnish to each of his
employees employment and a place of employment which are free from
recognized hazards that are causing or are likely to cause death or
serious physical harm to his employees. Also shall comply with OSHA
◉ OSHA's general duty clause states under "An Act" that it will:.
Answer: assure safe and healthful working conditions for working men
and women
,◉ Horizontal Standard. Answer: A standard which is applied to all
industries or people.
◉ Vertical Standard. Answer: A standard that applies to a particular or
specific group of people or industry.
◉ Incorporation By Reference. Answer: OSHA Directives Compliance
Directives GUIDEBOOK
● Enforcement & Compliance Directives (CPL)
● Letters of Interpretation
● Federal Register
◉ CPL. Answer: Compliance....
◉ Floor Hole. Answer: Opening greater than 1in & less than 12in in any
floor, platform, pavement or yard, through which materials (but not
persons) may fall through (ex: belt hole, pipe opening or slot opening)
◉ Floor Opening. Answer: Opening greater than 12in (note an
OPENING is larger than a HOLE)
◉ Minimum width of fixed industrial stairs. Answer: 28 inches wide
, ◉ OSHA certifies that a citation must be. Answer: ● addressed
● corrections must be completed by abatement date
● OSHA has 180 days to issue the actual citation(s)
◉ Cages or Wells shall be provided on ladders. Answer: greater than 20
feet to a maximum of unbroken length of 30 feet (1910.27)
◉ General Duty Clause. Answer: Every employer shall furnish to his
employee's employment and a place of employment which are free from
recognized hazards that are causing or likely to cause death or serious
physical harm to his employees.
◉ OSHA Inspection Review (priority). Answer: 1) Imminent danger
2) Catastrophies & fatal accidents
3) Employee complaints & referrals
4) Programmed, high level inspections
5) Follow up inspections
◉ Inspection Process must include. Answer: 1) Opening Conference
2) Walk Around
3) Closing Conference
