Electrical Level 3 - Module 10 Questions with Correct Answers Rated A+.

Electrical Level 3 - Module 10 Questions n n n n n n




with Correct Answers | Rated A+ n n n n n n




The video cable used in new installations is normally - CORRECT ANSWER -RG6
n n n n n n n n n n n n




A structured cabling subsystem that connects buildings together in a multi-building environment is
n n n n n n n n n n n n




call a - CORRECT ANSWER -Campus Backbone Subsystem
n n n n n n n n




Straight conduit runs used in campus backbone systems should have pull boxes installed no more
n n n n n n n n n n n n n n




than - CORRECT ANSWER -140' (43m) Apart
n n n n n n n




Label conduit for a campus backbone within - CORRECT ANSWER -6" (150 mm) Of The Termination
n n n n n n n n n n n n n n n




Point
n




Telecom cables in an ER or TR subsystem must be separated from electrical conduit or cable by at
n n n n n n n n n n n n n n n n n




least - CORRECT ANSWER -12" (300 mm)
n n n n n n n




Riser pathways should run perpendicular to fluorescent lighting and be separated by a distance of
n n n n n n n n n n n n n n




least - CORRECT ANSWER -5" (125 mm)
n n n n n n n




Vertical cabling spans exceeding 30' (9 m) in riser support subsystems must be supported in -
n n n n n n n n n n n n n n n




CORRECT ANSWER -30' (9 m)
n n n n n




When installing horizontal ER / TR / MC sleeves, the minimum distance between the ER / TR
n n n n n n n n n n n n n n n n




/MCs and the horizontal subsystem is - CORRECT ANSWER -3" (75 mm)
n n n n n n n n n n n




RJ45 connectors used for 4-pair UTP are identified as - CORRECT ANSWER -8P8C
n n n n n n n n n n n n