Machine Startup - Basic Mill Operator
Questions and Answers Graded A+
Once the Operator has completed the required tasks shown on the control screen, the
machine will return to its Home Position when you press: - ANSWER-Power Up
Some machine shops will require their Operators to press E-Stops when the Operator
leaves his/her machine for extended periods of time: - ANSWER-True
The term Home Position on a CNC machine means: - ANSWER-A fixed position for all
three axes, with the table moved to the front and left side of the machine space
When it is time turn on the machine, the Operator will press the Power On button. -
ANSWER-True
When starting up the Haas machine, it is important to check that the air pressure is in
the correct range. That range is 50-65 psi. - ANSWER-False
When the machine is powered up, it takes a moment to run through a series of
diagnostics. Once the diagnostics are complete, the normal control screen will appear,
and the red E-Stop light on top of the pendant will illuminate. This is normal, and nothing
to be concerned about. - ANSWER-Tru
When the machine is running, there are three ways to stop the machine: press Feed
Hold, press the Reset button, or hit Emergency Stop. - ANSWER-True
When you start the workday, the machine must be clean and clear of chips on the
waycovers and table, BEFORE you start running parts on the machine. - ANSWER-
True
While the machine is running, if you detect a problem or a potential crash situation, you
should press: - ANSWER-Emergency Stop
Questions and Answers Graded A+
Once the Operator has completed the required tasks shown on the control screen, the
machine will return to its Home Position when you press: - ANSWER-Power Up
Some machine shops will require their Operators to press E-Stops when the Operator
leaves his/her machine for extended periods of time: - ANSWER-True
The term Home Position on a CNC machine means: - ANSWER-A fixed position for all
three axes, with the table moved to the front and left side of the machine space
When it is time turn on the machine, the Operator will press the Power On button. -
ANSWER-True
When starting up the Haas machine, it is important to check that the air pressure is in
the correct range. That range is 50-65 psi. - ANSWER-False
When the machine is powered up, it takes a moment to run through a series of
diagnostics. Once the diagnostics are complete, the normal control screen will appear,
and the red E-Stop light on top of the pendant will illuminate. This is normal, and nothing
to be concerned about. - ANSWER-Tru
When the machine is running, there are three ways to stop the machine: press Feed
Hold, press the Reset button, or hit Emergency Stop. - ANSWER-True
When you start the workday, the machine must be clean and clear of chips on the
waycovers and table, BEFORE you start running parts on the machine. - ANSWER-
True
While the machine is running, if you detect a problem or a potential crash situation, you
should press: - ANSWER-Emergency Stop
