1|Page
NFPA 10 EXAM LATEST 2026 ACTUAL EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS (100% VERIFIED
ANSWERS) |ALREADY GRADED A+| ||PROFESSOR VERIFIED||
||BRANDNEW!!!||
It is ok for hand held portable fire extinguishers to be left sitting on
the floor as long as it is properly marked with location signs. -
ANSWER-False
Fire extinguishers weighing less than 40lbs shall be installed so
that the top of the extinguishers is not more than 6 feet from the
floor. - ANSWER-False
Fire extinguishers weighing more than 40lbs shall be installed so
that the top of the extinguisher is no more than 3.5 feet from the
floor. - ANSWER-True
In no case shall the clearance between the bottom of the
extinguisher and the floor be less than 4 inches. - ANSWER-False
,2|Page
Labels that specifically relate to operation, classification, or
warning information shall not be permitted on the front of the
extinguisher. - ANSWER-False
Which of the following conditions may result in the condemning of
a fire extinguisher during inspection. - ANSWER-All of the above.
High pressure cylinders and cartridges including nitrogen
cylinders and cartridges used as an expellant for wheeled fire
extinguisher shall not be hydrostatically tested every 5 years. -
ANSWER-False
Carbon dioxide fire extinguishers shall be tested at 5/3 the service
pressure as stamped into the cylinder. - ANSWER-True
AFFF and FFFP fire extingulshers can be protected against
temperatures below 40° F by adding an antifreeze charge. -
ANSWER-False
, 3|Page
The use of a Carbon Dioxide fire extinguisher - ANSWER-Should
not be used in confined spaces
Burning metals - ANSWER-Known as class D fires and may react
violently to water and significantly increase hazards associated
with burning metals.
Items that affect distribution of portable fire extinguishers are: -
ANSWER-All of the above.
Carbon Dioxide hose assemblies have a continuous metal braid
that connects to both couplings to minimize the static shock
hazard. - ANSWER-True
Hydrotest labels should be printed in black with a light blue
background - ANSWER-False
Halon Extinguisher Recharge- if the extinguisher valve is removed
for service, what is the recommended? - ANSWER-Purge
extinguisher with nitrogen
NFPA 10 EXAM LATEST 2026 ACTUAL EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS (100% VERIFIED
ANSWERS) |ALREADY GRADED A+| ||PROFESSOR VERIFIED||
||BRANDNEW!!!||
It is ok for hand held portable fire extinguishers to be left sitting on
the floor as long as it is properly marked with location signs. -
ANSWER-False
Fire extinguishers weighing less than 40lbs shall be installed so
that the top of the extinguishers is not more than 6 feet from the
floor. - ANSWER-False
Fire extinguishers weighing more than 40lbs shall be installed so
that the top of the extinguisher is no more than 3.5 feet from the
floor. - ANSWER-True
In no case shall the clearance between the bottom of the
extinguisher and the floor be less than 4 inches. - ANSWER-False
,2|Page
Labels that specifically relate to operation, classification, or
warning information shall not be permitted on the front of the
extinguisher. - ANSWER-False
Which of the following conditions may result in the condemning of
a fire extinguisher during inspection. - ANSWER-All of the above.
High pressure cylinders and cartridges including nitrogen
cylinders and cartridges used as an expellant for wheeled fire
extinguisher shall not be hydrostatically tested every 5 years. -
ANSWER-False
Carbon dioxide fire extinguishers shall be tested at 5/3 the service
pressure as stamped into the cylinder. - ANSWER-True
AFFF and FFFP fire extingulshers can be protected against
temperatures below 40° F by adding an antifreeze charge. -
ANSWER-False
, 3|Page
The use of a Carbon Dioxide fire extinguisher - ANSWER-Should
not be used in confined spaces
Burning metals - ANSWER-Known as class D fires and may react
violently to water and significantly increase hazards associated
with burning metals.
Items that affect distribution of portable fire extinguishers are: -
ANSWER-All of the above.
Carbon Dioxide hose assemblies have a continuous metal braid
that connects to both couplings to minimize the static shock
hazard. - ANSWER-True
Hydrotest labels should be printed in black with a light blue
background - ANSWER-False
Halon Extinguisher Recharge- if the extinguisher valve is removed
for service, what is the recommended? - ANSWER-Purge
extinguisher with nitrogen
