Cal. Fire Weekly Fire Pump Cert. Sample Test Questions
with Correct Answers
ILLUMINATED. THE TRANSFER SWITCH NORMAL PILOT LIGHT SHOULD BE _____.
CLOSED. THE ISOLATING SWITCH FOR ELECTRIC PUMPS SHOULD BE _____.
OVERHEATING. PUMP PACKING BOXES, BEARINGS AND CASINGS SHALL BE CHECKED
FOR...
OFF. THE REVERSE PHASE ALARM PILOT LIGHT FOR ELECTRIC PUMPS SHOULD BE _____.
DEFICIENCIES NOT EVIDENT BY INSPECTION. THE PURPOSE OF TESTING THE PUMP
ASSEMBLY IS TO ENSURE AUTOMATIC MANUAL OPERATION UPON DEMAND AND CONTINUOUS
DELIVERY OF THE REQUIRED SYSTEM OUTPUT. AN ADDITIONAL PURPOSE IS TO DETECT...
ON. THE NORMAL PHASE ROTATION PILOT SHOULD BE _____.
NORMAL AT WHAT LEVEL SHOULD THE OIL LEVEL IN THE VERTICAL SIGHT GLASS BE?
FULL. WHEN VERIFYING WATER LEVEL IN SUCTION RESERVOIR DURING WEEKLY
INSPECTION, THE WATER LEVEL SHOULD BE _____.
, HYDRAULIC CONTROLLERS INCLUDE AIR, _____, OR ELECTRIC - OPERATED UNITS.
2/3 AT WHAT LEVEL SHOULD THE FUEL TANK BE?
RUNNING THE WEEKLY TEST PERTINENT ADJUSTMENTS SHALL BE MADE WHILE THE
PUMP IS _____.
AUTO THE CONTROLLER SELECTOR SWITCH SHOULD BE IN THE _____ POSITION?
ENGINE RUNNING TIME METER THE NUMBER OF ENGINE OPERATING HOURS IS
MEASURED BY THE _____?
OIL THE _____ LEVEL IN THE RIGHT ANGLE GEAR DRIVE SHOULD BE NORMAL.
SHAFT DESIGN. TYPES OF CENTRIFUGAL FIRE PUMPS INCLUDE SINGLE AND MULTISTAGE
UNITS OF HORIZONTAL AND VERTICAL _____ .
UNOBSTRUCTED AND IN PLACE. FOR BOTH ELECTRIC AND DIESEL PUMPS, THE WET PIT
SUCTION SCREENS SHOULD BE _____.
NORMAL. THE ELECTROLYTE LEVEL IN THE BATTERIES SHOULD BE _____.
with Correct Answers
ILLUMINATED. THE TRANSFER SWITCH NORMAL PILOT LIGHT SHOULD BE _____.
CLOSED. THE ISOLATING SWITCH FOR ELECTRIC PUMPS SHOULD BE _____.
OVERHEATING. PUMP PACKING BOXES, BEARINGS AND CASINGS SHALL BE CHECKED
FOR...
OFF. THE REVERSE PHASE ALARM PILOT LIGHT FOR ELECTRIC PUMPS SHOULD BE _____.
DEFICIENCIES NOT EVIDENT BY INSPECTION. THE PURPOSE OF TESTING THE PUMP
ASSEMBLY IS TO ENSURE AUTOMATIC MANUAL OPERATION UPON DEMAND AND CONTINUOUS
DELIVERY OF THE REQUIRED SYSTEM OUTPUT. AN ADDITIONAL PURPOSE IS TO DETECT...
ON. THE NORMAL PHASE ROTATION PILOT SHOULD BE _____.
NORMAL AT WHAT LEVEL SHOULD THE OIL LEVEL IN THE VERTICAL SIGHT GLASS BE?
FULL. WHEN VERIFYING WATER LEVEL IN SUCTION RESERVOIR DURING WEEKLY
INSPECTION, THE WATER LEVEL SHOULD BE _____.
, HYDRAULIC CONTROLLERS INCLUDE AIR, _____, OR ELECTRIC - OPERATED UNITS.
2/3 AT WHAT LEVEL SHOULD THE FUEL TANK BE?
RUNNING THE WEEKLY TEST PERTINENT ADJUSTMENTS SHALL BE MADE WHILE THE
PUMP IS _____.
AUTO THE CONTROLLER SELECTOR SWITCH SHOULD BE IN THE _____ POSITION?
ENGINE RUNNING TIME METER THE NUMBER OF ENGINE OPERATING HOURS IS
MEASURED BY THE _____?
OIL THE _____ LEVEL IN THE RIGHT ANGLE GEAR DRIVE SHOULD BE NORMAL.
SHAFT DESIGN. TYPES OF CENTRIFUGAL FIRE PUMPS INCLUDE SINGLE AND MULTISTAGE
UNITS OF HORIZONTAL AND VERTICAL _____ .
UNOBSTRUCTED AND IN PLACE. FOR BOTH ELECTRIC AND DIESEL PUMPS, THE WET PIT
SUCTION SCREENS SHOULD BE _____.
NORMAL. THE ELECTROLYTE LEVEL IN THE BATTERIES SHOULD BE _____.
