OSMOSE PESTICIDE QUIZ QUESTIONS AND ANSWERS
Shipping papers are designed to? - (answer)Inform emergency response personnel of the quantity and
types of Hazardous Materials that are being transported on a particular vehicle.
Precautionary statements and toxicity categories. - (answer)Cat I - Danger (highly toxic) Cat II - Warning
(moderately toxic) Cat III - Caution (slightly toxic) Cat IIII - (relatively non-toxic)
When should you read the product label? - (answer)Always read the product label before using product.
Before you select, buy or use the product. Before applying. After applying if anything out of the ordinary
happens. Before storing or disposing of the pesticide or pesticide containers.
Types of fumes used. - (answer)WoodFume. MITC-Fume. DuraFume.
Depth of hole drilled for MITC-Fume. - (answer)12" to 15"
Angle drilled for MITC-Fume - (answer)45 degrees or steeper
Where do I start drilling for MITC - (answer)At ground level
In the absence of contract specifications, this chart determines the number or placement of application
holes for MITC. - (answer)28" or less- 2 holes beginning at ground line spaced 90 degrees apart and 6" to
8" inches higher than first hole. 29" to 35" - 3 holes beginning at ground-line spaced 120 degrees apart
and 6" to 8" higher than previous hole. 36" to 49" - 4 holes beginning at ground line spaced 90 degrees
apart and 6 to 8 inches higher than previous hole. 50" to 59" - 5 holes beginning at ground line spaced
70 degrees apart and 6 to 8 inches higher than previous hole.
Steps to applying MITC-Fume (after drilling hole) - (answer)Have on proper PPE. Grab 1 tube at a time.
Start at lowest hole first. Open tube away from face. Place in lowest hole (open end down). Place MITC
tube cap in hole. Plug hole.
SDS (mandatory parts) - (answer)Identification
Hazard identification
, OSMOSE PESTICIDE QUIZ QUESTIONS AND ANSWERS
Composition
First-aid measures
Fire-fighting measures
Accidental release measures
Handling and storage
Exposure controls, PPE
Physical and Chemical properties
Stability and reactivity
Toxicological information
Other information
SDS (non mandatory parts) - (answer)Ecological information
Disposal considerations
Transport information
Regulatory information
We cannot treat a pole within how many feet of a well? - (answer)50
When symptoms appear over a long period of time due to repeated exposures to slightly toxic materials;
this is known as? - (answer)Chronic poisoning
How many MITC tubes are placed in a 35" ground-line circumference? - (answer)3
An applicator is allowed to apply a pesticide at a lower dosage than what is listed on the label? -
(answer)True
What is the proper method (in order) to follow if the event of a spill? - (answer)Control
Contain
Shipping papers are designed to? - (answer)Inform emergency response personnel of the quantity and
types of Hazardous Materials that are being transported on a particular vehicle.
Precautionary statements and toxicity categories. - (answer)Cat I - Danger (highly toxic) Cat II - Warning
(moderately toxic) Cat III - Caution (slightly toxic) Cat IIII - (relatively non-toxic)
When should you read the product label? - (answer)Always read the product label before using product.
Before you select, buy or use the product. Before applying. After applying if anything out of the ordinary
happens. Before storing or disposing of the pesticide or pesticide containers.
Types of fumes used. - (answer)WoodFume. MITC-Fume. DuraFume.
Depth of hole drilled for MITC-Fume. - (answer)12" to 15"
Angle drilled for MITC-Fume - (answer)45 degrees or steeper
Where do I start drilling for MITC - (answer)At ground level
In the absence of contract specifications, this chart determines the number or placement of application
holes for MITC. - (answer)28" or less- 2 holes beginning at ground line spaced 90 degrees apart and 6" to
8" inches higher than first hole. 29" to 35" - 3 holes beginning at ground-line spaced 120 degrees apart
and 6" to 8" higher than previous hole. 36" to 49" - 4 holes beginning at ground line spaced 90 degrees
apart and 6 to 8 inches higher than previous hole. 50" to 59" - 5 holes beginning at ground line spaced
70 degrees apart and 6 to 8 inches higher than previous hole.
Steps to applying MITC-Fume (after drilling hole) - (answer)Have on proper PPE. Grab 1 tube at a time.
Start at lowest hole first. Open tube away from face. Place in lowest hole (open end down). Place MITC
tube cap in hole. Plug hole.
SDS (mandatory parts) - (answer)Identification
Hazard identification
, OSMOSE PESTICIDE QUIZ QUESTIONS AND ANSWERS
Composition
First-aid measures
Fire-fighting measures
Accidental release measures
Handling and storage
Exposure controls, PPE
Physical and Chemical properties
Stability and reactivity
Toxicological information
Other information
SDS (non mandatory parts) - (answer)Ecological information
Disposal considerations
Transport information
Regulatory information
We cannot treat a pole within how many feet of a well? - (answer)50
When symptoms appear over a long period of time due to repeated exposures to slightly toxic materials;
this is known as? - (answer)Chronic poisoning
How many MITC tubes are placed in a 35" ground-line circumference? - (answer)3
An applicator is allowed to apply a pesticide at a lower dosage than what is listed on the label? -
(answer)True
What is the proper method (in order) to follow if the event of a spill? - (answer)Control
Contain
