BECC MOD 2 2026 COMPREHENSIVE STUDY
GUIDE COMPLETE SOLUTIONS VERIFIED
◉ Effectiveness. Answer: An operational characteristic that is
increased when personnel at all levels use ORM as a decision-
making tool to increase the probability of a successful task.
◉ Mishap severity is represented by.... Answer: Roman numerals
◉ What is an expected consequence of an event in terms of degree of
injury, illness, damage, etc.? Answer: Severity
◉ What is the goal of Operational Risk Management? Answer: To
manage risks so duties can be accomplished with minimum amount
of loss.
◉ Identity Hazards Answer: ORM Process step to begin with
operational analysis and then conduct a preliminary hazard analysis.
◉ Supervise Answer: An ORM process step that conducts follow-up
evaluations of the controls to ensure they remain in place and have
desired effect.
,◉ Deliberate Level Answer: The level of the ORM process that
applies the complete process and includes planning of upcoming
operations.
◉ Hazards Answer: A condition with potential to cause injury, death,
property damage, or mission degradation.
◉ ___________ Ensure ALL movable objects are secured. Answer:
ALWAYS
◉ Aluminum paint Answer: Identifies piping that may become
extremely hot in engineering and machinery spaces.
◉ CO2 Answer: The preferred extinguishing agent for an electrical
fire.
◉ What type of operations should not be stopped or repaired while
the leaking portion is still under pressure? Answer: Compressed Air
◉ Who should report any unsafe or unhealthy working conditions,
mishaps, and near mishaps as soon as possible? Answer: All
Personnel
◉ Asbestos are colored _____ to ensure easy recognition. Answer: Red
, ◉ What are the PPE that must be worn when handling asbestos?
Answer: Disposable coveralls, hoods, gloves, shoe covers, and safety
glasses.
◉ What requires PPE including an attached safety line, ventilation,
and a safety observer stationed outside to monitor the work and
tend the safety line? Answer: Voids
◉ What requires posting a fire watch in the area, and using proper
eye protection and protective clothing? Answer: Welding
◉ What may be located in acoustical insulation, lagging, certain deck
tiles. breaks, and clutch linings of older ships? Answer: Asbestos
◉ What are used to prevent personnel from falling or getting into an
unsafe area? Answer: Barriers
◉ What should you do when working on a pressure system
component? Answer: Ensure the pressure is fully relieved by
opening any drain valves, and always use the tag-out procedures.
◉ Mishap Answer: Any unplanned or unexpected event causing
personnel injury, occupational illness, death, or material loss or
damage.
GUIDE COMPLETE SOLUTIONS VERIFIED
◉ Effectiveness. Answer: An operational characteristic that is
increased when personnel at all levels use ORM as a decision-
making tool to increase the probability of a successful task.
◉ Mishap severity is represented by.... Answer: Roman numerals
◉ What is an expected consequence of an event in terms of degree of
injury, illness, damage, etc.? Answer: Severity
◉ What is the goal of Operational Risk Management? Answer: To
manage risks so duties can be accomplished with minimum amount
of loss.
◉ Identity Hazards Answer: ORM Process step to begin with
operational analysis and then conduct a preliminary hazard analysis.
◉ Supervise Answer: An ORM process step that conducts follow-up
evaluations of the controls to ensure they remain in place and have
desired effect.
,◉ Deliberate Level Answer: The level of the ORM process that
applies the complete process and includes planning of upcoming
operations.
◉ Hazards Answer: A condition with potential to cause injury, death,
property damage, or mission degradation.
◉ ___________ Ensure ALL movable objects are secured. Answer:
ALWAYS
◉ Aluminum paint Answer: Identifies piping that may become
extremely hot in engineering and machinery spaces.
◉ CO2 Answer: The preferred extinguishing agent for an electrical
fire.
◉ What type of operations should not be stopped or repaired while
the leaking portion is still under pressure? Answer: Compressed Air
◉ Who should report any unsafe or unhealthy working conditions,
mishaps, and near mishaps as soon as possible? Answer: All
Personnel
◉ Asbestos are colored _____ to ensure easy recognition. Answer: Red
, ◉ What are the PPE that must be worn when handling asbestos?
Answer: Disposable coveralls, hoods, gloves, shoe covers, and safety
glasses.
◉ What requires PPE including an attached safety line, ventilation,
and a safety observer stationed outside to monitor the work and
tend the safety line? Answer: Voids
◉ What requires posting a fire watch in the area, and using proper
eye protection and protective clothing? Answer: Welding
◉ What may be located in acoustical insulation, lagging, certain deck
tiles. breaks, and clutch linings of older ships? Answer: Asbestos
◉ What are used to prevent personnel from falling or getting into an
unsafe area? Answer: Barriers
◉ What should you do when working on a pressure system
component? Answer: Ensure the pressure is fully relieved by
opening any drain valves, and always use the tag-out procedures.
◉ Mishap Answer: Any unplanned or unexpected event causing
personnel injury, occupational illness, death, or material loss or
damage.
