For Expert help and assignment handling,
1
Fdny p-99 c of f Questions and Answers (100%
Correct Answers) Already Graded A+
What is a general requirement of the location of the installation of a
boiler? Ans: Adequate clearance from combustile construction
What temperature must the materials remain under during combustion?
Ans: 170 degrees
© 2026 Assignment Expert
What is a requirement for the access of the boiler? Ans: Access for
operation and maintenance must not be hazardous
Guru01 - Stuvia
What is required upon installation to operate a boiler? Ans: Inspection
and test resulting in equipment use permit from commissioner
How often should a boiler be inspected? Ans: Once a year
What documentation is required from a certificate holder? Ans: Owners
annual statement
What is required to hydrostatically test upon installation and who should
perform these tests? Ans: Liquid fuel piping and fuel oil storage tanks by
the installing contractor
At what pressure should piping be tested? Ans: 1/2 max working pressure
but less than pressure required for storage tank
At what pressure should oil storage tanks be tested? Ans: At 1 1/2x max
working pressure but never < 25 psi
, For Expert help and assignment handling,
2
How long should hydrostatic pressure be maintained? Ans: Until all joints
and connections are inspected for leaks and at 30 minutes have passed
Who is responsible for testing gas distribution piping? Ans: Installing
contractor before closing and operation
What is described on instruction cards and where are they located? Ans:
Care and operation of oil burner located near the equipment.
© 2026 Assignment Expert
What type of burners require a C of F holder to operate them? Ans: Any
boiler that is not automatic or requires preheating.
What is the license holder responsible for after repair? Ans: Inspecting the
Guru01 - Stuvia
repairs, and functioning of all control devices and positioning of valves.
What type of heat and combustion equipment are required with the air
pollution control code? Ans: All burners fire with solid, liquid, or gas.
Including rubbish burners/incinerators.
What temperature are the products of combustion upon exit in low
temperature equipment? Ans: Less than 600 degrees
What temperature are the products of combustion upon exit in medium
temperature equipment? Ans: 6001000
What temperature are the products of combustion upon exit in high
temperature equipment? Ans: 1000+
How much cfm of air be capable of per gallon of oil per hour? Ans: 36
cfm
1
Fdny p-99 c of f Questions and Answers (100%
Correct Answers) Already Graded A+
What is a general requirement of the location of the installation of a
boiler? Ans: Adequate clearance from combustile construction
What temperature must the materials remain under during combustion?
Ans: 170 degrees
© 2026 Assignment Expert
What is a requirement for the access of the boiler? Ans: Access for
operation and maintenance must not be hazardous
Guru01 - Stuvia
What is required upon installation to operate a boiler? Ans: Inspection
and test resulting in equipment use permit from commissioner
How often should a boiler be inspected? Ans: Once a year
What documentation is required from a certificate holder? Ans: Owners
annual statement
What is required to hydrostatically test upon installation and who should
perform these tests? Ans: Liquid fuel piping and fuel oil storage tanks by
the installing contractor
At what pressure should piping be tested? Ans: 1/2 max working pressure
but less than pressure required for storage tank
At what pressure should oil storage tanks be tested? Ans: At 1 1/2x max
working pressure but never < 25 psi
, For Expert help and assignment handling,
2
How long should hydrostatic pressure be maintained? Ans: Until all joints
and connections are inspected for leaks and at 30 minutes have passed
Who is responsible for testing gas distribution piping? Ans: Installing
contractor before closing and operation
What is described on instruction cards and where are they located? Ans:
Care and operation of oil burner located near the equipment.
© 2026 Assignment Expert
What type of burners require a C of F holder to operate them? Ans: Any
boiler that is not automatic or requires preheating.
What is the license holder responsible for after repair? Ans: Inspecting the
Guru01 - Stuvia
repairs, and functioning of all control devices and positioning of valves.
What type of heat and combustion equipment are required with the air
pollution control code? Ans: All burners fire with solid, liquid, or gas.
Including rubbish burners/incinerators.
What temperature are the products of combustion upon exit in low
temperature equipment? Ans: Less than 600 degrees
What temperature are the products of combustion upon exit in medium
temperature equipment? Ans: 6001000
What temperature are the products of combustion upon exit in high
temperature equipment? Ans: 1000+
How much cfm of air be capable of per gallon of oil per hour? Ans: 36
cfm
