School Bus CDL (Test 4 of 5) Exam Questions with Correct Answers 100% Verified|
Guaranteed Success
True or False: When braking on downgrades, forceful, intermittent braking (snubbing) is safer
than light, continued braking. true
A driver who misses a child's unloading stop along the route should Radio the dispatcher for
direction and follow local procedures
Which of the following statements about bus evacuation procedure is true? f time allows,
notify the dispatch office of evacuation location, conditions, and type of assistance needed
Which of the following is a recommended procedure when unloading students at school?
Have the students remain seated until they are told to exit
The most dangerous times during a school bus ride are When loading and unloading
students
When stopping at a railroad-highway crossing, drivers must stop no closer than 15-50 feet
If students must cross the street when they get off the bus , which statement is true? Before
crossing, students should make eye contact with the bus driver and wait for the driver's signal
that its safe to proceed
You should adjust the outside of the left and right side flat mirrors to see 200 feet behind
the bus
If the gate comes down as you are starting across a railroad-highway crossing, you should
Drive through the gate
,Which of the following procedures should be followed when driving a school bus in high winds?
Keep a strong grip on the steering wheel and try to anticipate
During loading and unloading students you should check your mirrors Continously
The CDL manual indicates the last step in picking up students at the bus stop is to Make a
final check to confirm all traffic has stopped before opening the bus door and signaling to
students to approach
Which of the following statements about special dangers of loading and unloading is true?
Students should b told to leave any dropped object and move to a point of safety out of the
danger zones and get the driver's attention to retrieve the object
After deciding the type of an evacuation that is necessary, the next step you must take is
Securing the bus
What is the safest way to handle unruly behavior on the bus? Pull of the road in a safe
direction, secure the bus, stand up and firmly tell the students what behavior you expect of
them
Which of the following information will confirm you are driving a vehicle with anti-lock brakes
A yellow ABS malfunction lamp on the instrument panel will light when you start the engine
A yellow ABS malfunction lamp on the instrument panel will light when you start the engine
braking systems
Keep your wheels from locking up during hard brake applications
At bus stops where more than one child is unloaded, which is procedure is most likely to
prevent an unloading accident? Driver counts sts before students as they disembark, and
recount before moving bus
,Which of the following is a reason to evacuate a school bus? The bus is stalled on railroad
tracks and there is no train in sight
The blind spot behind the bus could extend up to __ feet behind the bus 200
Which of the following statements best explains what to do when a school bus stalls on tracks
at the a railroad-highway crossing? Driver should evacuate bus and move students away
from the tracks on angle toward the oncoming train
You should never change the location of a bus stop without written approval from your school
district? true
How many feet around the entire bus are considered the danger zone? 10 ft
What is the last step you should do, to load the bus safely? Monitor all mirrors
How does ABS help? Helps avoid wheel lock-up and maintain control
When approaching a bus stop, how many feet before the students should you stop? 10 feet
If the ABS malfunction, you still have regular brakes. You may drive the bus but get serviced
soon. True
You should consider evacuating the bus if Fire or danger of fire, smell of leaking fuel, bus
could be hit by other vehicles
What endorsement does a CDL driver not need to drive a school bus? H endorsement
, If you miss a students bus stop, what should you do? Radio dispatch ask for directions or
local procedures
How many feet should you activate your hazard lights when approaching corssing 200 feet
When you intend to turn, you should activate the appropriate turn signal at least When you
intend to turn, you should activate the appropriate turn signal at least
The blind spot behind the bus could extend to how many feet of space 400 ft
The area to the left and right of the corner of the bus which may no be seen by the driver in the
rear view mirrors are called Blind spot
If convex mirrors are properly adjusted, you should be able to see at least on traffic lane on
either side
When stopping at a railroad crossing , you should Stop no closer than 15 ft
Students have been injured or killed during unloading when Their clothing, accessories and
even body parts get hung up in the handrail
ABS will compensate for bad brakes or poor brake maintenance false
Where are the danger zones around the bus Front, back, both sides
What are left and ride side crossover mirrors used for To see the entire area in front of the
bus
Guaranteed Success
True or False: When braking on downgrades, forceful, intermittent braking (snubbing) is safer
than light, continued braking. true
A driver who misses a child's unloading stop along the route should Radio the dispatcher for
direction and follow local procedures
Which of the following statements about bus evacuation procedure is true? f time allows,
notify the dispatch office of evacuation location, conditions, and type of assistance needed
Which of the following is a recommended procedure when unloading students at school?
Have the students remain seated until they are told to exit
The most dangerous times during a school bus ride are When loading and unloading
students
When stopping at a railroad-highway crossing, drivers must stop no closer than 15-50 feet
If students must cross the street when they get off the bus , which statement is true? Before
crossing, students should make eye contact with the bus driver and wait for the driver's signal
that its safe to proceed
You should adjust the outside of the left and right side flat mirrors to see 200 feet behind
the bus
If the gate comes down as you are starting across a railroad-highway crossing, you should
Drive through the gate
,Which of the following procedures should be followed when driving a school bus in high winds?
Keep a strong grip on the steering wheel and try to anticipate
During loading and unloading students you should check your mirrors Continously
The CDL manual indicates the last step in picking up students at the bus stop is to Make a
final check to confirm all traffic has stopped before opening the bus door and signaling to
students to approach
Which of the following statements about special dangers of loading and unloading is true?
Students should b told to leave any dropped object and move to a point of safety out of the
danger zones and get the driver's attention to retrieve the object
After deciding the type of an evacuation that is necessary, the next step you must take is
Securing the bus
What is the safest way to handle unruly behavior on the bus? Pull of the road in a safe
direction, secure the bus, stand up and firmly tell the students what behavior you expect of
them
Which of the following information will confirm you are driving a vehicle with anti-lock brakes
A yellow ABS malfunction lamp on the instrument panel will light when you start the engine
A yellow ABS malfunction lamp on the instrument panel will light when you start the engine
braking systems
Keep your wheels from locking up during hard brake applications
At bus stops where more than one child is unloaded, which is procedure is most likely to
prevent an unloading accident? Driver counts sts before students as they disembark, and
recount before moving bus
,Which of the following is a reason to evacuate a school bus? The bus is stalled on railroad
tracks and there is no train in sight
The blind spot behind the bus could extend up to __ feet behind the bus 200
Which of the following statements best explains what to do when a school bus stalls on tracks
at the a railroad-highway crossing? Driver should evacuate bus and move students away
from the tracks on angle toward the oncoming train
You should never change the location of a bus stop without written approval from your school
district? true
How many feet around the entire bus are considered the danger zone? 10 ft
What is the last step you should do, to load the bus safely? Monitor all mirrors
How does ABS help? Helps avoid wheel lock-up and maintain control
When approaching a bus stop, how many feet before the students should you stop? 10 feet
If the ABS malfunction, you still have regular brakes. You may drive the bus but get serviced
soon. True
You should consider evacuating the bus if Fire or danger of fire, smell of leaking fuel, bus
could be hit by other vehicles
What endorsement does a CDL driver not need to drive a school bus? H endorsement
, If you miss a students bus stop, what should you do? Radio dispatch ask for directions or
local procedures
How many feet should you activate your hazard lights when approaching corssing 200 feet
When you intend to turn, you should activate the appropriate turn signal at least When you
intend to turn, you should activate the appropriate turn signal at least
The blind spot behind the bus could extend to how many feet of space 400 ft
The area to the left and right of the corner of the bus which may no be seen by the driver in the
rear view mirrors are called Blind spot
If convex mirrors are properly adjusted, you should be able to see at least on traffic lane on
either side
When stopping at a railroad crossing , you should Stop no closer than 15 ft
Students have been injured or killed during unloading when Their clothing, accessories and
even body parts get hung up in the handrail
ABS will compensate for bad brakes or poor brake maintenance false
Where are the danger zones around the bus Front, back, both sides
What are left and ride side crossover mirrors used for To see the entire area in front of the
bus
