AFAB 110 MIDTERM EXAM
WITH COMPLETE SOLUTIONS
GRADED A+
QUESTIONS AND ANSWERS
Which of the following is not an example of a spatial instrument?. ANSWER -playing 3d tic
tac toe
There are three dimension terms common to drafting education. which of the following is
not correct?. ANSWER -Length
The type of section view where the section view is no longer aligned in projection with
other views is:
A. removed
B. revolved
C. broken-out
D. offset. ANSWER -offset
Cylindrical object with an odd number of features, such as spokes or holes on a bolt circle,
could be better described with a ---- section.. ANSWER -Aligned
The broken-out section requires another type of line from the alphabet of lines to help show
where the removed portion was broken off in a jagged sort of way. this is the --- line..
ANSWER -Short break
When a --- section is created, it can be overlaid on the view or short break lines can be used
on each side of th e view to seperate it from the other visible lines.. ANSWER -Revolved
Type of section wherein the section view is probably located out of projection with the other
regular or auxiliary views is a --- section.. ANSWER -Removed
, There is a conventional practice that allows the drafter to leave a feature unhatched, even
though the cutting-plane line passes through it. Which of the following is not relevent to
this conventional practice?. ANSWER -Hole
If there is a large area that needs to receive section lines, the ____ section allows for the
section lines to only be applied around the perimeter.. ANSWER -outline
In assembly drawings, there may be some parts that do not receive section lines, but rather
the area cut by the cutting-plane line is filled-in solid. Which of the following is not relevant
to this conventional practice?. ANSWER -Springs
T/F each type of line in the standards has one, and only one, option for its appearance..
ANSWER -False
t/f In recent years, the standards have only recommended two line weights: thick and thin.
. ANSWER -True
T/F Sometimes, hidden lines are omitted on complex views when the drawing is clear
without them.. ANSWER -true
T/F The latest standards set forth the appearance of each line available for industrial prints,
including exact line thickness and exact dash and space lengths.. ANSWER -false
T/F Paths of motion can be indicated on a print with the chain line. ANSWER -false
T/F Some textbooks and CAD software programs refer to extension lines as witness lines,
although that term is not used in the standards.. ANSWER -true
T/f In dimensioning, a leader is used to point to a feature with a local note.. ANSWER -
true
T/f In engineering drawings and industrial prints, the text and numeric information is
referred to as printing.. ANSWER -false
WITH COMPLETE SOLUTIONS
GRADED A+
QUESTIONS AND ANSWERS
Which of the following is not an example of a spatial instrument?. ANSWER -playing 3d tic
tac toe
There are three dimension terms common to drafting education. which of the following is
not correct?. ANSWER -Length
The type of section view where the section view is no longer aligned in projection with
other views is:
A. removed
B. revolved
C. broken-out
D. offset. ANSWER -offset
Cylindrical object with an odd number of features, such as spokes or holes on a bolt circle,
could be better described with a ---- section.. ANSWER -Aligned
The broken-out section requires another type of line from the alphabet of lines to help show
where the removed portion was broken off in a jagged sort of way. this is the --- line..
ANSWER -Short break
When a --- section is created, it can be overlaid on the view or short break lines can be used
on each side of th e view to seperate it from the other visible lines.. ANSWER -Revolved
Type of section wherein the section view is probably located out of projection with the other
regular or auxiliary views is a --- section.. ANSWER -Removed
, There is a conventional practice that allows the drafter to leave a feature unhatched, even
though the cutting-plane line passes through it. Which of the following is not relevent to
this conventional practice?. ANSWER -Hole
If there is a large area that needs to receive section lines, the ____ section allows for the
section lines to only be applied around the perimeter.. ANSWER -outline
In assembly drawings, there may be some parts that do not receive section lines, but rather
the area cut by the cutting-plane line is filled-in solid. Which of the following is not relevant
to this conventional practice?. ANSWER -Springs
T/F each type of line in the standards has one, and only one, option for its appearance..
ANSWER -False
t/f In recent years, the standards have only recommended two line weights: thick and thin.
. ANSWER -True
T/F Sometimes, hidden lines are omitted on complex views when the drawing is clear
without them.. ANSWER -true
T/F The latest standards set forth the appearance of each line available for industrial prints,
including exact line thickness and exact dash and space lengths.. ANSWER -false
T/F Paths of motion can be indicated on a print with the chain line. ANSWER -false
T/F Some textbooks and CAD software programs refer to extension lines as witness lines,
although that term is not used in the standards.. ANSWER -true
T/f In dimensioning, a leader is used to point to a feature with a local note.. ANSWER -
true
T/f In engineering drawings and industrial prints, the text and numeric information is
referred to as printing.. ANSWER -false
