AMMO CDC LATEST 2026 STUDY GUIDE QUESTIONS AND
SOLUTIONS GRADED A+
✔✔One of the most difficult problems a supervisor has in training crewmembers is
getting them to - ✔✔follow all technical order (TO) procedures.
✔✔What is a basic principle to follow when using technical orders (TO)? - ✔✔Know how
to locate information.
✔✔A typical 11A series technical order is broken down into what kind of sections? -
✔✔Work packages
✔✔Air Force explosive safety standards are identified in - ✔✔Defense Explosive Safety
Regulation (DESR) 6055.09_Air Force Manual (AFMAN) 91-201
✔✔It is essential that missile safety personnel are familiar with missile -
✔✔transportation routes.
✔✔Which type of munitions poses a forward firing ordnance hazard? - ✔✔Flare
dispensers
✔✔The Air Force instruction (AFI) that governs the intrinsic radiation safety program is -
✔✔AFI 91-108.
✔✔Which publication is used to obtain information to measure intrinsic radiation of
weapons in the stockpile? - ✔✔Technical Order (TO) 11N-20-7, Nuclear Safety Criteria
✔✔Personnel who are not normally part of an explosives operation but have duties that
require their presence are referred to as - ✔✔casuals.
✔✔Under what circumstance would a crew chief stop an explosive operation? - ✔✔An
unknown visitor enters the area
✔✔When is it acceptable to make a modification to a munitions item without referencing
the technical order or getting authorization from the item manager first? - ✔✔Never
✔✔Who has a responsibility to conserve and protect government property and supplies
on your installation? - ✔✔All United States Air Force (USAF) members
✔✔What are two supply references that cover practices and procedures for United
States (US) government property? - ✔✔Air Force Instruction (AFI) 23-101 and
Department of Defense Instruction (DoDI) 4140.01
, ✔✔For a reusable container to be considered usable, which requirements must it meet?
- ✔✔Capable of protecting unserviceable items against further deterioration
✔✔In regards to maintenance data collection, whose overall responsibility is it to ensure
the accuracy and completion of all maintenance actions performed at the lowest level? -
✔✔Each performing work center supervisor
✔✔The type of maintenance similar to performing an oil and filter change on your
personally owned vehicle is known as what kind of maintenance? - ✔✔Preventive
✔✔Which type of maintenance is scheduled after a specified amount of time (e.g., 30,
180, 360 days)? - ✔✔Periodic
✔✔When the automated system to document maintenance data (generated work order)
is not available, use the manual method by completing an - ✔✔Air Force Technical
Order (AFTO) Form 349, Maintenance Data Collection Record.
✔✔When using the "CORRECTIVE ACTION" block on an Air Force Technical Order
(AFTO) Form 244, how do you correct an erroneous red dash or red diagonal entry? -
✔✔Enter "Symbol/Initial entered in error, no discrepancy exists" and enter their
minimum signature in the "CORRECTED BY" block
✔✔What is a basic reason for creating emphasis on air intercept missile (AIM) and air-
to-ground missile (AGM) reliability monitoring systems? - ✔✔The need to determine
how well an equipment item meets its functioning requirement and how that item will
perform in the future
✔✔Which agency maintains the Air Force's operational air-intercept missile and air-to-
ground missile inventory? - ✔✔Warner Robins Air Logistics Center (WR-ALC)
✔✔Which Air Force computer system operated at the base level is used specifically for
updating missile records? - ✔✔Tactical missile record system
✔✔Which of the following missiles is not tracked using the tactical missile reporting
system? - ✔✔AGM-86
✔✔Which program/menu in the tactical missile reporting system allows you to enter a
missile's flight hour data? - ✔✔Missile update
✔✔Munitions control is responsible for - ✔✔reconciling expenditures of assembled
munitions.
✔✔Identify the main goal for running a base recall. - ✔✔Account for all personnel
SOLUTIONS GRADED A+
✔✔One of the most difficult problems a supervisor has in training crewmembers is
getting them to - ✔✔follow all technical order (TO) procedures.
✔✔What is a basic principle to follow when using technical orders (TO)? - ✔✔Know how
to locate information.
✔✔A typical 11A series technical order is broken down into what kind of sections? -
✔✔Work packages
✔✔Air Force explosive safety standards are identified in - ✔✔Defense Explosive Safety
Regulation (DESR) 6055.09_Air Force Manual (AFMAN) 91-201
✔✔It is essential that missile safety personnel are familiar with missile -
✔✔transportation routes.
✔✔Which type of munitions poses a forward firing ordnance hazard? - ✔✔Flare
dispensers
✔✔The Air Force instruction (AFI) that governs the intrinsic radiation safety program is -
✔✔AFI 91-108.
✔✔Which publication is used to obtain information to measure intrinsic radiation of
weapons in the stockpile? - ✔✔Technical Order (TO) 11N-20-7, Nuclear Safety Criteria
✔✔Personnel who are not normally part of an explosives operation but have duties that
require their presence are referred to as - ✔✔casuals.
✔✔Under what circumstance would a crew chief stop an explosive operation? - ✔✔An
unknown visitor enters the area
✔✔When is it acceptable to make a modification to a munitions item without referencing
the technical order or getting authorization from the item manager first? - ✔✔Never
✔✔Who has a responsibility to conserve and protect government property and supplies
on your installation? - ✔✔All United States Air Force (USAF) members
✔✔What are two supply references that cover practices and procedures for United
States (US) government property? - ✔✔Air Force Instruction (AFI) 23-101 and
Department of Defense Instruction (DoDI) 4140.01
, ✔✔For a reusable container to be considered usable, which requirements must it meet?
- ✔✔Capable of protecting unserviceable items against further deterioration
✔✔In regards to maintenance data collection, whose overall responsibility is it to ensure
the accuracy and completion of all maintenance actions performed at the lowest level? -
✔✔Each performing work center supervisor
✔✔The type of maintenance similar to performing an oil and filter change on your
personally owned vehicle is known as what kind of maintenance? - ✔✔Preventive
✔✔Which type of maintenance is scheduled after a specified amount of time (e.g., 30,
180, 360 days)? - ✔✔Periodic
✔✔When the automated system to document maintenance data (generated work order)
is not available, use the manual method by completing an - ✔✔Air Force Technical
Order (AFTO) Form 349, Maintenance Data Collection Record.
✔✔When using the "CORRECTIVE ACTION" block on an Air Force Technical Order
(AFTO) Form 244, how do you correct an erroneous red dash or red diagonal entry? -
✔✔Enter "Symbol/Initial entered in error, no discrepancy exists" and enter their
minimum signature in the "CORRECTED BY" block
✔✔What is a basic reason for creating emphasis on air intercept missile (AIM) and air-
to-ground missile (AGM) reliability monitoring systems? - ✔✔The need to determine
how well an equipment item meets its functioning requirement and how that item will
perform in the future
✔✔Which agency maintains the Air Force's operational air-intercept missile and air-to-
ground missile inventory? - ✔✔Warner Robins Air Logistics Center (WR-ALC)
✔✔Which Air Force computer system operated at the base level is used specifically for
updating missile records? - ✔✔Tactical missile record system
✔✔Which of the following missiles is not tracked using the tactical missile reporting
system? - ✔✔AGM-86
✔✔Which program/menu in the tactical missile reporting system allows you to enter a
missile's flight hour data? - ✔✔Missile update
✔✔Munitions control is responsible for - ✔✔reconciling expenditures of assembled
munitions.
✔✔Identify the main goal for running a base recall. - ✔✔Account for all personnel
