Fire Team Test EXAM Questions with 100% Correct
Answers | Verified | Updated (Actual Exam) 2025\2026
1. Nut: -> Washer -> Spring
2. What do you use to tighten a bolt?: Socket
3. Gear question: If they want to go fast: Bigger gear goes faster
Bolt goes through and comes out other side with washer and nut:
4.
Threaded end pointed away from you so it is not a hazard
5. What do you use to cut a bolt?: Hacksaw
6. Unmelted material: stop and call mechanic
7. Hopper: Adjust how much comes out. DO NOT adjust speed of belt.
8. If it is not a matter of speed: Adjust size of opening. DO NOT adjust speed
9. What do you do when the first grinder stops?: Jam
10. Grinder jam: Reverse manually
11. How to remove molding station arm?: Loosen middle nut then remove end nut
12. What is wrong if water is pouring over the edge?: Green filter clogged
13. Water tank is rising too quickly: Reduce amount of fresh water
14. What is the purpose of washing in a shake motion?: Wash all sides of the
material
Washing station: one pipe has four pipes the other has one spout at
15.
the end, which has the most pressure?: 1 spout/head has most pressure
1/5
, 16. Gear for washing machine: turn clock wise to turn ott
17. Inside of gasket/washer: distribute pressure and reduce chance of loosening
18. 50% cone volume: B-middle line
19. 1: washing
20. 2: washing
2/5
Answers | Verified | Updated (Actual Exam) 2025\2026
1. Nut: -> Washer -> Spring
2. What do you use to tighten a bolt?: Socket
3. Gear question: If they want to go fast: Bigger gear goes faster
Bolt goes through and comes out other side with washer and nut:
4.
Threaded end pointed away from you so it is not a hazard
5. What do you use to cut a bolt?: Hacksaw
6. Unmelted material: stop and call mechanic
7. Hopper: Adjust how much comes out. DO NOT adjust speed of belt.
8. If it is not a matter of speed: Adjust size of opening. DO NOT adjust speed
9. What do you do when the first grinder stops?: Jam
10. Grinder jam: Reverse manually
11. How to remove molding station arm?: Loosen middle nut then remove end nut
12. What is wrong if water is pouring over the edge?: Green filter clogged
13. Water tank is rising too quickly: Reduce amount of fresh water
14. What is the purpose of washing in a shake motion?: Wash all sides of the
material
Washing station: one pipe has four pipes the other has one spout at
15.
the end, which has the most pressure?: 1 spout/head has most pressure
1/5
, 16. Gear for washing machine: turn clock wise to turn ott
17. Inside of gasket/washer: distribute pressure and reduce chance of loosening
18. 50% cone volume: B-middle line
19. 1: washing
20. 2: washing
2/5
