NCCCO Tower Crane Certification Exam Latest Update
Questions with Answers Grade A+100% Pass
CRANE, RIGGING, AND TOWER CRANE SAFETY – QUESTIONS & ANSWERS
Q1. Splices in rail tracks shall have what feature?
A: Smooth joints
Q2. How often should hydraulic system fluid levels be checked?
A: Daily
Q3. If power fails during operations, what should NOT apply?
A: Finishing moving the load to its destination
Q4. Who is responsible for ensuring the load does not exceed crane rating?
A: Person responsible for the lift
Q5. Where should climbing instructions be kept?
A: On site
Q6. All climbing operations must be supervised by whom?
A: Qualified person
Q7. When must load-limiting devices be tested?
A: Before the crane is placed in service
Q8. Crane hooks must have latches unless the latch is what?
A: Impractical for the application
Q9. Sign and panel size and position must meet whose limitations?
A: Manufacturer
Q10. Fall protection is required when exposed to a fall of how many feet?
A: 6 feet or more
Q11. Maximum travel distance on hand levers from neutral?
A: 14 inches
Q12. Minimum clearance for 175kV power lines?
A: 15 feet
Q13. When must crane controls be tested?
A: At the start of each new shift
Questions with Answers Grade A+100% Pass
CRANE, RIGGING, AND TOWER CRANE SAFETY – QUESTIONS & ANSWERS
Q1. Splices in rail tracks shall have what feature?
A: Smooth joints
Q2. How often should hydraulic system fluid levels be checked?
A: Daily
Q3. If power fails during operations, what should NOT apply?
A: Finishing moving the load to its destination
Q4. Who is responsible for ensuring the load does not exceed crane rating?
A: Person responsible for the lift
Q5. Where should climbing instructions be kept?
A: On site
Q6. All climbing operations must be supervised by whom?
A: Qualified person
Q7. When must load-limiting devices be tested?
A: Before the crane is placed in service
Q8. Crane hooks must have latches unless the latch is what?
A: Impractical for the application
Q9. Sign and panel size and position must meet whose limitations?
A: Manufacturer
Q10. Fall protection is required when exposed to a fall of how many feet?
A: 6 feet or more
Q11. Maximum travel distance on hand levers from neutral?
A: 14 inches
Q12. Minimum clearance for 175kV power lines?
A: 15 feet
Q13. When must crane controls be tested?
A: At the start of each new shift
