NCCCO PACKAGE DEAL

When making a multiple crane lift, it is important for the operator to understand that: - ️️The weight may increase if the other crane lands the load If a crane is not set-up level and the operator swings a load from the high side to the low side, the load radius will: - ️️Increase Mos...

1. A wire rope that is a 6x19 classification could have how many wires per strand? - ️️15 through 26 wires per strand 2. How often should a synthetic web sling be inspected? - ️️Each day before use 3. Which considerations should be given to suspend lifting operations with a mobile cran...

continuously - ️️during all crane movements, asme b30.5 states that communication shall be maintained stop crane movements - ️️if the communication is disrupted at any time while the crane is operation, the operator shall osha 1926.1400 appendix a - ️️OSHA's standard method crane ...

Where is the best location for leveling a crane? - ️️Upperworks When determining the "gross load" the best method is: - ️️Get an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? - ️️Basket, vertical, choker What is the purpose ...

Before leveling a mobile crane on outriggers, an operator should ensure: - ️️there is no weight of the crane bearing on any tires Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - ️️Keeping 90 degree angle between cylinder rod and ...

1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? a. Boom down b. Swing c. Boom up d. Extend boom - ️️c. 2. When hoisting personnel, within what percentage of level must ...

Splices in rall tracks shall have - ️️Smooth Joints Hydraulic systems should have their proper fluid level checked - ️️Daily If power fails during operations, the following shouldn't apply - ️️Do your best to finish moving load where it was designated to go If load is undetermi...

What is prohibited by OSHA 1926 Subpart cc regarding wire rope on a crane? - ️️Splicing What should be of major concern when considering surfaces for crane set up locations? - ️️Voids, tanks, loose fill, depressions Which items are included in the suspended weight when calculating part...

Where is the best location for leveling a crane? - ️️Upperworks When determining the Agross load@ the best method is: - ️️Get an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? - ️️Basket, vertical, choker 1. What is the purpose...