IMSA Traffic Signal Technician Level II (New 2024/ 2025 Update) Questions and Verified Answers| Grade A| 100% Correct

IMSA Traffic Signal Technician Level II (New 2024/ 2025 Update) Questions and Verified Answers| Grade A| 100% Correct QUESTION The reinforcing on a concrete strain pole is arranged to primarily withstands loads in how many directions? Answer: One direction QUESTION The side of the pole that is to be turned toward the load is called? Answer: The load face QUESTION Overhead signs used in traffic signals are what two types? Answer: Regulatory signs Street name signs QUESTION How are "blank-out" signs illuminated? Answer: Internally QUESTION When are blank-out signs only activated? (2) Answer: Specific times of day Specific events QUESTION Several considerations must be made before actively engaging in work with a lift truck, these include (5): Answer: Positioning if the vehicle in or adjacent to the roadway Establishing a temporary traffic control zone Verification of overhead conflicts Planning the work to be performed Using an approved safety harness QUESTION Bucket trucks may have a boom that is capable of rotating and extending which is called? Answer: Articulating boom QUESTION What are some disadvantages of an aerial platform lift?(4) Answer: Only extends vertically Cannot reach as high as boom trucks Must be parked on flat ground Must be positioned directly below work area. QUESTION The primary purpose of the traffic signal monitor unit is to act as? Answer: Guard against system malfunction QUESTION If a malfunction is present the monitoring unit will au