NWSA TT1 EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2025 – 2026
What term identifies a monopole component - ANSWERS-
Base flange
What term is used to describe the rules written by the
department of labor? - ANSWERS-Regulations
According to the FAA how tall must each band of
obstruction paint on a towers of 700' and under be? -
ANSWERS-Each band must be 1/7th of the total height of
the structure
What class of rigging plan is used for demolition work? -
ANSWERS-Class IV (4)
, What is the importance of identifying cantilever distance? -
ANSWERS-To read the gin pole load chart
What class of rigging plan is required when you are picking a
gross load of 300 lbs - ANSWERS-Class 1
When using tape and butyl to weatherproof a ground kit
what is a critical step in the process? - ANSWERS-Always cut
the tape with sciccors
According to regulations, what is the maximum arresting
force allowed to the human body? - ANSWERS-Maximum
arresting force allowed on the body is 1800 lbs. But our y-
landyards reduce the force to half that
What is the minimum number of ground kits installed in a
single run - ANSWERS-3. (1 at the top above the hoisting
grip. 1 at the base of the tower on the vertical run, 1 at the
cabinet)
how often must a fire extinguisher be inspected by a
qualified person? - ANSWERS-Annually
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2025 – 2026
What term identifies a monopole component - ANSWERS-
Base flange
What term is used to describe the rules written by the
department of labor? - ANSWERS-Regulations
According to the FAA how tall must each band of
obstruction paint on a towers of 700' and under be? -
ANSWERS-Each band must be 1/7th of the total height of
the structure
What class of rigging plan is used for demolition work? -
ANSWERS-Class IV (4)
, What is the importance of identifying cantilever distance? -
ANSWERS-To read the gin pole load chart
What class of rigging plan is required when you are picking a
gross load of 300 lbs - ANSWERS-Class 1
When using tape and butyl to weatherproof a ground kit
what is a critical step in the process? - ANSWERS-Always cut
the tape with sciccors
According to regulations, what is the maximum arresting
force allowed to the human body? - ANSWERS-Maximum
arresting force allowed on the body is 1800 lbs. But our y-
landyards reduce the force to half that
What is the minimum number of ground kits installed in a
single run - ANSWERS-3. (1 at the top above the hoisting
grip. 1 at the base of the tower on the vertical run, 1 at the
cabinet)
how often must a fire extinguisher be inspected by a
qualified person? - ANSWERS-Annually
