CWI Examination-001 Pop Test Modules 1&2- Part A Fundamentals Revision 7 Exam Questions and Answers 100% Pass

CWI Examination-001 Pop Test Modules 1&2- Part A Fundamentals Revision 7 Exam Questions and Answers 100% Pass There are how many levels of AWS certifications? - Three Who is responsible for determining if a person has all of the qualifications? - Person's employer A Certified Welding Inspector's responsibility is? - Witnessing testing of welder test assemblies Interpreting drawings and other documents Verifying that the Welding Procedure are as specified and qualified A Senior Certified Welding Inspector shall have no fewer than _______ years' experience in an occupation that has a direct relationship to welded assemblies fabricated to national or international standards. - Fifteen 2Brittie Donald, All Rights Reserved © 2025 If a candidate that is testing for his/her CWI certification and does not have but a seventh grade education, they must have a minimum of ______ years' work experience un welding function. - Twelve The maximum amount of time an Engineering/Technical or physical science degree can count against the required amount of time needed for experience is _________ years. - Two All senior certified welding inspectors must successfully complete the SCWI examination with a minimum of _______% correct. - 72 It is ok for a SCWI, CWI or CAWI to issue a statement on weld inspection matters connected with public policy which were inspired or paid for by an interested party as long as he/she identifies the interested party, speaker and discloses any possible financial interest. - True It is ok for a SCWI, CWI or CAWI to accept a hunting or fishing trip from any party or parties dealing with client or employer in connection with his work, as long as it has no influence over his decision making process. - False The only way an Inspector can re-new his/her certification from the date of their initial certification is by taking the test over the practical portion of the examination. - False The standard that covers Safety in Welding, Cutting and Allied Process is - ANSI/ASC Z49.1 3Brittie Donald, All Rights Reserved © 2025 The welding inspector is a responsible person involved in the determination of weld quality in accordance with________. - Applicable codes and or specification The welding Inspector must be able to prove far vision acuity on a _______ chart at 12 feet and complete a color prescription test. - J1 J2 Snellen NON OF THE ABOVE KASHMIR stand for _________. - Knowledge, Attitude, Skills, and Habits A welding Inspector must be able to communicate with which of the following types of people? - Welders, Engineers, Shop or Field Superintendents The typical accepted standard for guidance in the certification of Non-Destructive Personnel is _______. - ASNT-SNT-TC-1A AWS D1.! Covers - Structural Welding Code The OSHA standard that covers Hazard Communication is ____________. - OSHA 29 CFR 1920.1200 TLV stands for _______ - Threshold Limit Value 4Brittie Donald, All Rights Reserved © 2025 The fumes and gases generated by welding are generally not considered to be harmful, if you have MSDS sheet on them. - False Oxygen enriched atmosphere pose great danger to occupants of confined areas when the oxygen level is above________. - 25% File gas cylinder valves should be opened _________