Operation of Wastewater Treatment prep complete exam questions and verified answers 2024/2025

Operation of Wastewater Treatment prep complete exam questions and verified answers 2024/2025 An Imhoff cone is used to measure________solids. A. suspended B. colloidal C. volatile D. settleable - CORRECT ANSWER-D. settleable (Operation of Wastewater Treatment Plants, Volume 1 by Kenneth D. Kerri) A _____ flume is widely used for measuring wastewater flow. - CORRECT ANSWERParshall (Operation of Wastewater Treatment Plants, Volume 1 by Kenneth D. Kerri) Velocity of flow in a grit channel must be reduced to a range of ____ to _____ fps in order for grit to properly settle. - CORRECT ANSWER-.7 to 1.4 fps (Operation of Wastewater Treatment Plants, Volume 1, 3.33 by Kenneth D. Kerri) With respect to grit removal systems, grit is traditionally defined as particles larger than 0.21mm (0.008 in) (65 mesh) and with a specific gravity of greater than ______. - CORRECT ANSWER-specific gravity of grit is 2.65 or greater (EPA Wastewater Technology Fact Sheet, Screening and Grit Removal) Mechanically cleaned bar screens feature bars set at _____ to _____ degrees from vertical. - CORRECT ANSWER-Bars set at 0 to 30 degrees from vertical. (EPA Wastewater Technology Fact Sheet, Screening and Grit Removal) Manually cleaned bar screens feature bars set at _____ to _____ degrees from vertical to facilitate cleaning. - CORRECT ANSWER-Bars set at 30 to 45 degrees from vertical to facilitate cleaning. Primarily used in older or smaller treatment facilities, or in bypass channels. (EPA Wastewater Technology Fact Sheet, Screening and Grit Removal