AFAB 110 Final Study Guide Exam , Most Recent Exam
2026 Actual Comprehensive Real Exam Questions
And Verified Answers ( 100% Correct Answers)
Already Graded A+ | Guaranteed Success |
Newest EXAM | Just Released!!
Which of the following is not a term for additional annotations
on a drawing -
ANSWER-
PROCESSES
For a hole that is 1.500"-1.508" mating with a shaft that is
1.475"-1.485" the
limits of clearance are - ANSWER-C-
.015"-0.33"
If an engineer specifies an RC3 class fit for a 1" assuming the
basic hole is -
ANSWER-1 INCH
HOLE
A tolerance method that incorporates the MIN or MAX note
is referred to as
____ - ANSWER-SINGLE
LIMIT
,A __ symbol is indicated by a letter in the box attached
to the views -
ANSWER-A
DATUM
The ___ of a feature is the size limit representing the feature
when the most
material is present - ANSWER-Maximum
material condition
Which of the following is an example of a bilateral tolerance
- ANSWER-+-
.005"
An un dimension drawing defines the part with a -
ANSWER-TRUE
GEOMETRY
VIEW
Dimensioning, the alternate part is commonly placed in
brackets following the
primary value -
ANSWER-Dual
Which of the following systems of dimensions is most useful
on drawings of
parts that are to be a machine on computer numerically
controlled equipment -
, ANSWER-COORDINATE DIMENSIONING
Arrowhead appearance lettering size and spacing for
extension lines are all
part of what is known as - ANSWER-
Mechanic
Which of the following pipe series symbols designates the
a straight pipe
thread - ANSWER-
NPS
The pipe thread that is the standard to the plumbing
trade - ANSWER-
REGULAR
What's the letter M - ANSWER-Metric
Which of the following unified thread - ANSWER-MINOR
DIAMETER
Which of the following thread class loses class - ANSWER-1A
or 1
Which of the following designations a unified form non
standard - ANSWER-
UNS
Not a thread form - ANSWER-RECTANGLE
2026 Actual Comprehensive Real Exam Questions
And Verified Answers ( 100% Correct Answers)
Already Graded A+ | Guaranteed Success |
Newest EXAM | Just Released!!
Which of the following is not a term for additional annotations
on a drawing -
ANSWER-
PROCESSES
For a hole that is 1.500"-1.508" mating with a shaft that is
1.475"-1.485" the
limits of clearance are - ANSWER-C-
.015"-0.33"
If an engineer specifies an RC3 class fit for a 1" assuming the
basic hole is -
ANSWER-1 INCH
HOLE
A tolerance method that incorporates the MIN or MAX note
is referred to as
____ - ANSWER-SINGLE
LIMIT
,A __ symbol is indicated by a letter in the box attached
to the views -
ANSWER-A
DATUM
The ___ of a feature is the size limit representing the feature
when the most
material is present - ANSWER-Maximum
material condition
Which of the following is an example of a bilateral tolerance
- ANSWER-+-
.005"
An un dimension drawing defines the part with a -
ANSWER-TRUE
GEOMETRY
VIEW
Dimensioning, the alternate part is commonly placed in
brackets following the
primary value -
ANSWER-Dual
Which of the following systems of dimensions is most useful
on drawings of
parts that are to be a machine on computer numerically
controlled equipment -
, ANSWER-COORDINATE DIMENSIONING
Arrowhead appearance lettering size and spacing for
extension lines are all
part of what is known as - ANSWER-
Mechanic
Which of the following pipe series symbols designates the
a straight pipe
thread - ANSWER-
NPS
The pipe thread that is the standard to the plumbing
trade - ANSWER-
REGULAR
What's the letter M - ANSWER-Metric
Which of the following unified thread - ANSWER-MINOR
DIAMETER
Which of the following thread class loses class - ANSWER-1A
or 1
Which of the following designations a unified form non
standard - ANSWER-
UNS
Not a thread form - ANSWER-RECTANGLE
