IMSA Work-Zone Safety Exam Questions with
Verified Answers
Taper length refers to: - ANSWER -The distance required to safely
route traffic from one lane to another
The taper length is based upon what two things? - ANSWER -The
width of the lane closed and the speed of the roadway
In a taper, the maximum distance between channeling devices should
be: - ANSWER -Equal in feet to the speed limit
On a barricade, if the stripes start at the upper right and angle down to
the lower left side: traffic should... - ANSWER -Pass to the left
At night time and/or on high speed roads greater than 45mph, cone
should be: - ANSWER -Retroreflectorized and have at least two white
bands/stripes AND at least 28in tall
On a rural, 2-lane road, where would you place the flagger in respect to
the beginning of a taper for a closed lane? - ANSWER -At the
beginning of the taper
True or false: the STOP/SLOW paddle is preferred over the flag? -
ANSWER -True
Traffic control devices include which of the following?
Signs
Signals
Pavement Markings - ANSWER -All of the above
, The Federal Highway Administration's national standard for traffic
control devices is the: - ANSWER -MUTCD (Manual on Uniform
Traffic Control Devices)
In the Manual, a mandatory condition is a: - ANSWER -Standard
Statement
In the Manual, an Option condition is one that is: - ANSWER -A
statement of permissive condition
A TTC plan is a: - ANSWER -Temporary Traffic Control plan
A TTC plan should include? - ANSWER -Typical application drawings
The MUTCD states that individuals responsible for the implementation
of TTC measures should: - ANSWER -Be trained/and or certified
TTC principes and procedures include? - ANSWER -(All of the above)
Traffic safety, movement, and guidance
TTC zone inspection
TTC zone maintenance
The based on the fundamental principles of TTC work zones should be
inspected when? - ANSWER -During both daytime and night time
True or False: the MUTCD indicates that a "standard" is a mandatory
practice - ANSWER -True
, True or False: The MUTCD indicates that a "guidance" is a
recommended practice - ANSWER -True
True or False: The MUTCD indicates that an "option" is a permissive
condition - ANSWER -True
A tort in legal terminology is a ______________ other than a breach of
contract for which a court will provide a remedy ✨✨ - ANSWER -
Civil wrong
Liability for a tort means the __________ to pay money damages to the
person injured or damaged - ANSWER -Legal obligation
Which of the following can negligence be defined as:
The failure to do something that a "reasonable person" would ordinarily
do
The doing of something that a "reasonable person" would ordinarily not
do
The failure to use ordinary care - ANSWER -All of the above
The obligation for a person to conform to a certain standard of conduct
is the definition of: - ANSWER -Duty
The MUTCD is an example of: - ANSWER -Accepted standards and
practices
A red light is out. It is reported my the police to the traffic engineering
department. This is an example of: - ANSWER -Notice
Verified Answers
Taper length refers to: - ANSWER -The distance required to safely
route traffic from one lane to another
The taper length is based upon what two things? - ANSWER -The
width of the lane closed and the speed of the roadway
In a taper, the maximum distance between channeling devices should
be: - ANSWER -Equal in feet to the speed limit
On a barricade, if the stripes start at the upper right and angle down to
the lower left side: traffic should... - ANSWER -Pass to the left
At night time and/or on high speed roads greater than 45mph, cone
should be: - ANSWER -Retroreflectorized and have at least two white
bands/stripes AND at least 28in tall
On a rural, 2-lane road, where would you place the flagger in respect to
the beginning of a taper for a closed lane? - ANSWER -At the
beginning of the taper
True or false: the STOP/SLOW paddle is preferred over the flag? -
ANSWER -True
Traffic control devices include which of the following?
Signs
Signals
Pavement Markings - ANSWER -All of the above
, The Federal Highway Administration's national standard for traffic
control devices is the: - ANSWER -MUTCD (Manual on Uniform
Traffic Control Devices)
In the Manual, a mandatory condition is a: - ANSWER -Standard
Statement
In the Manual, an Option condition is one that is: - ANSWER -A
statement of permissive condition
A TTC plan is a: - ANSWER -Temporary Traffic Control plan
A TTC plan should include? - ANSWER -Typical application drawings
The MUTCD states that individuals responsible for the implementation
of TTC measures should: - ANSWER -Be trained/and or certified
TTC principes and procedures include? - ANSWER -(All of the above)
Traffic safety, movement, and guidance
TTC zone inspection
TTC zone maintenance
The based on the fundamental principles of TTC work zones should be
inspected when? - ANSWER -During both daytime and night time
True or False: the MUTCD indicates that a "standard" is a mandatory
practice - ANSWER -True
, True or False: The MUTCD indicates that a "guidance" is a
recommended practice - ANSWER -True
True or False: The MUTCD indicates that an "option" is a permissive
condition - ANSWER -True
A tort in legal terminology is a ______________ other than a breach of
contract for which a court will provide a remedy ✨✨ - ANSWER -
Civil wrong
Liability for a tort means the __________ to pay money damages to the
person injured or damaged - ANSWER -Legal obligation
Which of the following can negligence be defined as:
The failure to do something that a "reasonable person" would ordinarily
do
The doing of something that a "reasonable person" would ordinarily not
do
The failure to use ordinary care - ANSWER -All of the above
The obligation for a person to conform to a certain standard of conduct
is the definition of: - ANSWER -Duty
The MUTCD is an example of: - ANSWER -Accepted standards and
practices
A red light is out. It is reported my the police to the traffic engineering
department. This is an example of: - ANSWER -Notice
